[PATCH V2 06/15] ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board

[Christoph Niedermaier <cniedermaier@dh-electronics.com>]

On the PDK2 there are 4 keys and 4 leds. DHCOM GPIOs are
used for that, but one led isn't useable, because the GPIO
is already use as touch interrupt.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: kernel@dh-electronics.com
To: linux-arm-kernel@lists.infradead.org
---
V2: - Rebase on Shawn Guos branch for-next
---
 arch/arm/boot/dts/imx6q-dhcom-pdk2.dts | 88 ++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index 6bb7129d0498..fd29128d8602 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -57,6 +57,76 @@
 		};
 	};
 
+	gpio-keys {
+		#size-cells = <0>;
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keys_pdk2>;
+
+		button-0 {
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_pdk2>;
+
+		/*
+		 * Disable led5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-0 {
+			label = "green:led5";
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			default-state = "off";
+			status = "disabled";
+		};
+
+		led-1 {
+			label = "green:led6";
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "green:led7";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "green:led8";
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			default-state = "off";
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0edh6";
 		ddc-i2c-bus = <&i2c2>;
@@ -237,6 +307,24 @@
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x120b0
 		>;
 	};
+
+	pinctrl_keys_pdk2: keys-pdk2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x120b0 /* TA1 */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x120b0 /* TA2 */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x120b0 /* TA3 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x120b0 /* TA4 */
+		>;
+	};
+
+	pinctrl_leds_pdk2: leds-pdk2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x120b0 /* led6 */
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0 /* led7 */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x120b0 /* led8 */
+		>;
+	};
+
 };
 
 &ipu1_di0_disp0 {
-- 
2.11.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel