From: Manivannan Sadhasivam <mani@kernel.org>
To: soc@kernel.org
Cc: olof@lixom.net, arnd@arndb.de, afaerber@suse.de,
linux-actions@lists.infradead.org, thomas.liau@actions-semi.com,
cristian.ciocaltea@gmail.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>
Subject: [PATCH 2/2] ARM: dts: owl-s500-roseapplepi: Add ethernet support
Date: Mon, 28 Jun 2021 12:58:17 +0530 [thread overview]
Message-ID: <20210628072817.8269-3-mani@kernel.org> (raw)
In-Reply-To: <20210628072817.8269-1-mani@kernel.org>
From: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Add pinctrl configuration for enabling the Ethernet MAC on RoseapplePi
SBC. Additionally, provide the necessary properties for the generic S500
ethernet node in order to setup PHY and MDIO.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/d0e1fbf81984127f0352eb740c7129424b5e40f9.1623401998.git.cristian.ciocaltea@gmail.com
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
---
arch/arm/boot/dts/owl-s500-roseapplepi.dts | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
index b8c5db2344aa..eb555f385283 100644
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
@@ -225,6 +225,27 @@ bias1-pinconf {
bias-pull-down;
};
};
+
+ ethernet_pins: ethernet-pins {
+ eth_rmii-pinmux {
+ groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+ "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+ "rmii_txen_mfp", "rmii_rxen_mfp",
+ "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+ function = "eth_rmii";
+ };
+
+ phy_clk-pinmux {
+ groups = "clko_25m_mfp";
+ function = "clko_25m";
+ };
+
+ ref_clk-pinconf {
+ groups = "rmii_ref_clk_drv";
+ drive-strength = <2>;
+ };
+
+ };
};
/* uSD */
@@ -241,6 +262,30 @@ &mmc0 {
vqmmc-supply = <&sd_vcc>;
};
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ phy-mode = "rmii";
+ phy-handle = <ð_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+ reset-delay-us = <10000>;
+ reset-post-delay-us = <150000>;
+
+ eth_phy: ethernet-phy@3 {
+ reg = <0x3>;
+ max-speed = <100>;
+ interrupt-parent = <&sirq>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
&twd_timer {
status = "okay";
};
--
2.25.1
next prev parent reply other threads:[~2021-06-28 7:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-28 7:28 [PATCH 0/2] ARM: Actions updates for v5.14 Manivannan Sadhasivam
2021-06-28 7:28 ` [PATCH 1/2] ARM: dts: owl-s500: Add ethernet support Manivannan Sadhasivam
2021-06-28 7:28 ` Manivannan Sadhasivam [this message]
2021-08-02 13:34 ` [PATCH 0/2] ARM: Actions updates for v5.14 Arnd Bergmann
-- strict thread matches above, loose matches on Subject: below --
2021-06-10 21:09 [PATCH 0/2] Add Ethernet DTS for Actions Semi Owl S500 SoCs Cristian Ciocaltea
2021-06-10 21:09 ` [PATCH 2/2] ARM: dts: owl-s500-roseapplepi: Add ethernet support Cristian Ciocaltea
2021-06-10 21:09 ` Cristian Ciocaltea
2021-06-11 5:56 ` Manivannan Sadhasivam
2021-06-11 5:56 ` Manivannan Sadhasivam
2021-06-11 6:31 ` Cristian Ciocaltea
2021-06-11 6:31 ` Cristian Ciocaltea
2021-06-11 6:39 ` Manivannan Sadhasivam
2021-06-11 6:39 ` Manivannan Sadhasivam
2021-06-11 7:14 ` Cristian Ciocaltea
2021-06-11 7:14 ` Cristian Ciocaltea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210628072817.8269-3-mani@kernel.org \
--to=mani@kernel.org \
--cc=afaerber@suse.de \
--cc=arnd@arndb.de \
--cc=cristian.ciocaltea@gmail.com \
--cc=linux-actions@lists.infradead.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=olof@lixom.net \
--cc=soc@kernel.org \
--cc=thomas.liau@actions-semi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.