Re: [RFC 2/3] net: Provide switchdev driver for NXP's More Than IP L2 switch

[Lukasz Majewski <lukma@denx.de>]

[-- Attachment #1: Type: text/plain, Size: 1921 bytes --]

Hi Andrew,

> > I do believe that I can just extend the L2 switch driver (fec_mtip.c
> > file to be precise) to provide full blown L2 switch functionality
> > without touching the legacy FEC more than in this patch set.
> > 
> > Would you consider applying this patch series then?  
> 
> What is most important is the ABI. If something is merged now, we need
> to ensure it does not block later refactoring to a clean new
> driver. The DT binding is considered ABI. So the DT binding needs to
> be like a traditional switchdev driver. Florian already pointed out,
> you can use a binding very similar to DSA. ti,cpsw-switch.yaml is
> another good example.

The best I could get would be:

&eth_switch {
	compatible = "imx,mtip-l2switch";
	reg = <0x800f8000 0x400>, <0x800fC000 0x4000>;

	interrupts = <100>;
	status = "okay";

	ethernet-ports {
		port1@1 {
			reg = <1>;
			label = "eth0";
			phys = <&mac0 0>;
		};

		port2@2 {
			reg = <2>;
			label = "eth1";
			phys = <&mac1 1>;
		};
	};
};

Which would abuse the "phys" properties usages - as 'mac[01]' are
referring to ethernet controllers.

On TI SoCs (e.g. am33xx-l4.dtsi) phys refer to some separate driver
responsible for PHY management. On NXP this is integrated with FEC
driver itself.

> 
> So before considering merging your changes, i would like to see a
> usable binding.
> 
> I also don't remember seeing support for STP. Without that, your
> network has broadcast storm problems when there are loops. So i would
> like to see the code needed to put ports into blocking, listening,
> learning, and forwarding states.
> 
> 	  Andrew




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]