From: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
To: netdev@vger.kernel.org
Cc: kuba@kernel.org, davem@davemloft.net, johannes@sipsolutions.net,
krishna.c.sudi@intel.com, linuxwwan@intel.com,
Loic Poulain <loic.poulain@linaro.org>
Subject: [PATCH V2 3/5] net: wwan: iosm: correct link-id handling
Date: Thu, 1 Jul 2021 20:37:45 +0530 [thread overview]
Message-ID: <20210701150745.1005098-1-m.chetan.kumar@linux.intel.com> (raw)
Link ID to be kept intact with MBIM session ID
Ex: ID 0 should be associated to MBIM session ID 0.
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
---
v2: no change.
---
drivers/net/wwan/iosm/iosm_ipc_imem_ops.c | 6 +++---
drivers/net/wwan/iosm/iosm_ipc_imem_ops.h | 6 +++---
drivers/net/wwan/iosm/iosm_ipc_mux_codec.c | 2 +-
drivers/net/wwan/iosm/iosm_ipc_wwan.c | 4 ++--
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c
index e4e9461b603e..0a472ce77370 100644
--- a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c
+++ b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.c
@@ -24,7 +24,7 @@ int ipc_imem_sys_wwan_open(struct iosm_imem *ipc_imem, int if_id)
return -EIO;
}
- return ipc_mux_open_session(ipc_imem->mux, if_id - 1);
+ return ipc_mux_open_session(ipc_imem->mux, if_id);
}
/* Release a net link to CP. */
@@ -33,7 +33,7 @@ void ipc_imem_sys_wwan_close(struct iosm_imem *ipc_imem, int if_id,
{
if (ipc_imem->mux && if_id >= IP_MUX_SESSION_START &&
if_id <= IP_MUX_SESSION_END)
- ipc_mux_close_session(ipc_imem->mux, if_id - 1);
+ ipc_mux_close_session(ipc_imem->mux, if_id);
}
/* Tasklet call to do uplink transfer. */
@@ -76,7 +76,7 @@ int ipc_imem_sys_wwan_transmit(struct iosm_imem *ipc_imem,
}
/* Route the UL packet through IP MUX Layer */
- ret = ipc_mux_ul_trigger_encode(ipc_imem->mux, if_id - 1, skb);
+ ret = ipc_mux_ul_trigger_encode(ipc_imem->mux, if_id, skb);
out:
return ret;
}
diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h
index fd356dafbdd6..2007fe23e9a5 100644
--- a/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h
+++ b/drivers/net/wwan/iosm/iosm_ipc_imem_ops.h
@@ -27,11 +27,11 @@
#define BOOT_CHECK_DEFAULT_TIMEOUT 400
/* IP MUX channel range */
-#define IP_MUX_SESSION_START 1
-#define IP_MUX_SESSION_END 8
+#define IP_MUX_SESSION_START 0
+#define IP_MUX_SESSION_END 7
/* Default IP MUX channel */
-#define IP_MUX_SESSION_DEFAULT 1
+#define IP_MUX_SESSION_DEFAULT 0
/**
* ipc_imem_sys_port_open - Open a port link to CP.
diff --git a/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c b/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c
index e634ffc6ec08..562de275797a 100644
--- a/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c
+++ b/drivers/net/wwan/iosm/iosm_ipc_mux_codec.c
@@ -288,7 +288,7 @@ static int ipc_mux_net_receive(struct iosm_mux *ipc_mux, int if_id,
/* Pass the packet to the netif layer. */
dest_skb->priority = service_class;
- return ipc_wwan_receive(wwan, dest_skb, false, if_id + 1);
+ return ipc_wwan_receive(wwan, dest_skb, false, if_id);
}
/* Decode Flow Credit Table in the block */
diff --git a/drivers/net/wwan/iosm/iosm_ipc_wwan.c b/drivers/net/wwan/iosm/iosm_ipc_wwan.c
index c999c64001f4..84e37c4b0f74 100644
--- a/drivers/net/wwan/iosm/iosm_ipc_wwan.c
+++ b/drivers/net/wwan/iosm/iosm_ipc_wwan.c
@@ -252,8 +252,8 @@ int ipc_wwan_receive(struct iosm_wwan *ipc_wwan, struct sk_buff *skb_arg,
skb->pkt_type = PACKET_HOST;
- if (if_id < (IP_MUX_SESSION_START - 1) ||
- if_id > (IP_MUX_SESSION_END - 1)) {
+ if (if_id < IP_MUX_SESSION_START ||
+ if_id > IP_MUX_SESSION_END) {
ret = -EINVAL;
goto free;
}
--
2.25.1
next reply other threads:[~2021-07-01 15:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 15:07 M Chetan Kumar [this message]
2021-07-02 10:48 ` [PATCH V2 3/5] net: wwan: iosm: correct link-id handling Sergey Ryazanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701150745.1005098-1-m.chetan.kumar@linux.intel.com \
--to=m.chetan.kumar@linux.intel.com \
--cc=davem@davemloft.net \
--cc=johannes@sipsolutions.net \
--cc=krishna.c.sudi@intel.com \
--cc=kuba@kernel.org \
--cc=linuxwwan@intel.com \
--cc=loic.poulain@linaro.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.