From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Viresh Kumar <vireshk@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: [PATCH v7 12/37] drm/tegra: dc: Support OPP and SoC core voltage scaling
Date: Fri, 2 Jul 2021 02:27:03 +0300 [thread overview]
Message-ID: <20210701232728.23591-13-digetx@gmail.com> (raw)
In-Reply-To: <20210701232728.23591-1-digetx@gmail.com>
Add OPP and SoC core voltage scaling support to the display controller
driver. This is required for enabling system-wide DVFS on pre-Tegra186
SoCs.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/gpu/drm/tegra/dc.c | 69 ++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/tegra/dc.h | 2 ++
2 files changed, 71 insertions(+)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 51bbbc42a144..fa9cbeb7a958 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -10,9 +10,12 @@
#include <linux/iommu.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
+#include <soc/tegra/common.h>
#include <soc/tegra/pmc.h>
#include <drm/drm_atomic.h>
@@ -1727,6 +1730,47 @@ int tegra_dc_state_setup_clock(struct tegra_dc *dc,
return 0;
}
+static void tegra_dc_update_voltage_state(struct tegra_dc *dc,
+ struct tegra_dc_state *state)
+{
+ unsigned long rate, pstate;
+ struct dev_pm_opp *opp;
+ int err;
+
+ if (!dc->has_opp_table)
+ return;
+
+ /* calculate actual pixel clock rate which depends on internal divider */
+ rate = DIV_ROUND_UP(clk_get_rate(dc->clk) * 2, state->div + 2);
+
+ /* find suitable OPP for the rate */
+ opp = dev_pm_opp_find_freq_ceil(dc->dev, &rate);
+
+ if (opp == ERR_PTR(-ERANGE))
+ opp = dev_pm_opp_find_freq_floor(dc->dev, &rate);
+
+ if (IS_ERR(opp)) {
+ dev_err(dc->dev, "failed to find OPP for %luHz: %pe\n",
+ rate, opp);
+ return;
+ }
+
+ pstate = dev_pm_opp_get_required_pstate(opp, 0);
+ dev_pm_opp_put(opp);
+
+ /*
+ * The minimum core voltage depends on the pixel clock rate (which
+ * depends on internal clock divider of the CRTC) and not on the
+ * rate of the display controller clock. This is why we're not using
+ * dev_pm_opp_set_rate() API and instead controlling the power domain
+ * directly.
+ */
+ err = dev_pm_genpd_set_performance_state(dc->dev, pstate);
+ if (err)
+ dev_err(dc->dev, "failed to set power domain state to %lu: %d\n",
+ pstate, err);
+}
+
static void tegra_dc_commit_state(struct tegra_dc *dc,
struct tegra_dc_state *state)
{
@@ -1766,6 +1810,8 @@ static void tegra_dc_commit_state(struct tegra_dc *dc,
value = SHIFT_CLK_DIVIDER(state->div) | PIXEL_CLK_DIVIDER_PCD1;
tegra_dc_writel(dc, value, DC_DISP_DISP_CLOCK_CONTROL);
}
+
+ tegra_dc_update_voltage_state(dc, state);
}
static void tegra_dc_stop(struct tegra_dc *dc)
@@ -1859,6 +1905,8 @@ static void tegra_crtc_atomic_disable(struct drm_crtc *crtc,
err = host1x_client_suspend(&dc->client);
if (err < 0)
dev_err(dc->dev, "failed to suspend: %d\n", err);
+
+ dev_pm_genpd_set_performance_state(dc->dev, 0);
}
static void tegra_crtc_atomic_enable(struct drm_crtc *crtc,
@@ -2622,6 +2670,23 @@ static int tegra_dc_couple(struct tegra_dc *dc)
return 0;
}
+static int tegra_dc_init_opp_table(struct tegra_dc *dc)
+{
+ struct tegra_core_opp_params opp_params = {};
+ int err;
+
+ err = devm_tegra_core_dev_init_opp_table(dc->dev, &opp_params);
+ if (err && err != -ENODEV)
+ return err;
+
+ if (err)
+ dc->has_opp_table = false;
+ else
+ dc->has_opp_table = true;
+
+ return 0;
+}
+
static int tegra_dc_probe(struct platform_device *pdev)
{
u64 dma_mask = dma_get_mask(pdev->dev.parent);
@@ -2687,6 +2752,10 @@ static int tegra_dc_probe(struct platform_device *pdev)
tegra_powergate_power_off(dc->powergate);
}
+ err = tegra_dc_init_opp_table(dc);
+ if (err < 0)
+ return err;
+
dc->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(dc->regs))
return PTR_ERR(dc->regs);
diff --git a/drivers/gpu/drm/tegra/dc.h b/drivers/gpu/drm/tegra/dc.h
index 5e13f1cfd749..88fc9c634c1d 100644
--- a/drivers/gpu/drm/tegra/dc.h
+++ b/drivers/gpu/drm/tegra/dc.h
@@ -91,6 +91,8 @@ struct tegra_dc {
struct drm_info_list *debugfs_files;
const struct tegra_dc_soc_info *soc;
+
+ bool has_opp_table;
};
static inline struct tegra_dc *
--
2.30.2
next prev parent reply other threads:[~2021-07-01 23:28 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 23:26 [PATCH v7 00/37] NVIDIA Tegra power management patches for 5.15 Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 01/37] soc/tegra: pmc: Temporarily disable PMC state syncing Dmitry Osipenko
2021-08-12 16:02 ` Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 02/37] soc/tegra: pmc: Implement attach_dev() of power domain drivers Dmitry Osipenko
2021-08-02 14:48 ` Ulf Hansson
2021-08-02 18:23 ` Dmitry Osipenko
2021-08-04 9:59 ` Ulf Hansson
2021-08-04 21:16 ` Dmitry Osipenko
2021-08-09 14:15 ` Ulf Hansson
2021-08-09 23:56 ` Dmitry Osipenko
2021-08-10 10:51 ` Ulf Hansson
2021-08-11 19:30 ` Dmitry Osipenko
2021-08-11 22:41 ` Dmitry Osipenko
2021-08-12 1:40 ` Dmitry Osipenko
2021-08-12 11:17 ` Ulf Hansson
2021-08-12 16:24 ` Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 03/37] soc/tegra: Don't print error message when OPPs not available Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 04/37] soc/tegra: Add devm_tegra_core_dev_init_opp_table_simple() Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 05/37] dt-bindings: clock: tegra-car: Document new tegra-clocks node Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 06/37] clk: tegra: Support runtime PM and power domain Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 07/37] dt-bindings: host1x: Document OPP and power domain properties Dmitry Osipenko
2021-07-01 23:26 ` [PATCH v7 08/37] dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and GR3D Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 09/37] gpu: host1x: Add host1x_channel_stop() Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 10/37] gpu: host1x: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 11/37] gpu: host1x: Add stub driver for MPE, VI, EPP and ISP Dmitry Osipenko
2021-07-01 23:27 ` Dmitry Osipenko [this message]
2021-07-01 23:27 ` [PATCH v7 13/37] drm/tegra: hdmi: Add OPP support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 14/37] drm/tegra: gr2d: Support OPP and power management Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 15/37] drm/tegra: gr3d: " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 16/37] drm/tegra: vic: Stop channel before suspending Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 17/37] usb: chipidea: tegra: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 18/37] bus: tegra-gmi: " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 19/37] pwm: tegra: Add runtime PM and OPP support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 20/37] mmc: sdhci-tegra: " Dmitry Osipenko
2021-07-02 3:39 ` kernel test robot
2021-07-02 3:39 ` kernel test robot
2021-07-01 23:27 ` [PATCH v7 21/37] mtd: rawnand: tegra: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 22/37] soc/tegra: fuse: Clear fuse->clk on driver probe failure Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 23/37] soc/tegra: fuse: Add runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 24/37] soc/tegra: fuse: Enable fuse clock on suspend Dmitry Osipenko
2021-07-21 16:00 ` Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 25/37] clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 26/37] spi: tegra20-slink: Improve runtime PM usage Dmitry Osipenko
2021-07-02 8:29 ` kernel test robot
2021-07-02 8:29 ` kernel test robot
2021-07-01 23:27 ` [PATCH v7 27/37] spi: tegra20-slink: Add OPP support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 28/37] memory: tegra20-emc: Add minimal runtime PM support Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 29/37] memory: tegra30-emc: " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 30/37] media: dt: bindings: tegra-vde: Convert to schema Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 31/37] media: dt: bindings: tegra-vde: Document OPP and power domain Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 32/37] media: staging: tegra-vde: Support generic " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 33/37] ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 34/37] ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 35/37] ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 36/37] ARM: tegra: Add Memory Client resets to Tegra30 " Dmitry Osipenko
2021-07-01 23:27 ` [PATCH v7 37/37] soc/tegra: pmc: Enable core domain support on Tegra20 and Tegra30 Dmitry Osipenko
2021-07-09 13:01 ` [PATCH v7 00/37] NVIDIA Tegra power management patches for 5.15 Ulf Hansson
2021-07-09 21:23 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701232728.23591-13-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pdeschrijver@nvidia.com \
--cc=sboyd@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=vireshk@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.