[PULL 12/13] docs: add slot when adding new PCIe root port

["Michael S. Tsirkin" <mst@redhat.com>]

From: Vincent Bernat <vincent@bernat.ch>

Without providing a specific slot, QEMU won't be able to create the
second additional PCIe root port with the following error:

    $ qemu-system-x86_64 [...] -machine q35 \
    >    -device pcie-root-port,bus=pcie.0,id=rp1 \
    >    -device pcie-root-port,bus=pcie.0,id=rp2
    qemu-system-x86_64: -device pcie-root-port,bus=pcie.0,id=rp2:
    Can't add chassis slot, error -16

This is due to the fact they both try to use slot 0. Update the
documentation to specify a slot for each new PCIe root port.

Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210614114357.1146725-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 docs/pcie_pci_bridge.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/docs/pcie_pci_bridge.txt b/docs/pcie_pci_bridge.txt
index ab35ebf3ca..1aa08fc5f0 100644
--- a/docs/pcie_pci_bridge.txt
+++ b/docs/pcie_pci_bridge.txt
@@ -70,9 +70,9 @@ A detailed command line would be:
 
 [qemu-bin + storage options] \
 -m 2G \
--device pcie-root-port,bus=pcie.0,id=rp1 \
--device pcie-root-port,bus=pcie.0,id=rp2 \
--device pcie-root-port,bus=pcie.0,id=rp3,bus-reserve=1 \
+-device pcie-root-port,bus=pcie.0,id=rp1,slot=1 \
+-device pcie-root-port,bus=pcie.0,id=rp2,slot=2 \
+-device pcie-root-port,bus=pcie.0,id=rp3,slot=3,bus-reserve=1 \
 -device pcie-pci-bridge,id=br1,bus=rp1 \
 -device pcie-pci-bridge,id=br2,bus=rp2 \
 -device e1000,bus=br1,addr=8
-- 
MST