Re: [PATCH v4 1/2] dt-bindings: timer: Add bindings for Intel Keem Bay SoC Timer

[Rob Herring <robh@kernel.org>]

On Mon, Jun 28, 2021 at 11:44:09AM +0530, shruthi.sanil@intel.com wrote:
> From: Shruthi Sanil <shruthi.sanil@intel.com>
> 
> Add Device Tree bindings for the Timer IP, which can be used as
> clocksource and clockevent device in the Intel Keem Bay SoC.
> 
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
> Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
> ---
>  .../bindings/timer/intel,keembay-timer.yaml   | 170 ++++++++++++++++++
>  1 file changed, 170 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml b/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
> new file mode 100644
> index 000000000000..24c149a4d220
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
> @@ -0,0 +1,170 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/intel,keembay-timer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Intel Keem Bay SoC Timers
> +
> +maintainers:
> +  - Shruthi Sanil <shruthi.sanil@intel.com>
> +
> +description: |
> +  The Intel Keem Bay timer driver supports clocksource and clockevent
> +  features for the timer IP used in Intel Keembay SoC.
> +  The timer block supports 1 free running counter and 8 timers.
> +  The free running counter can be used as a clocksouce and
> +  the timers can be used as clockevent. Each timer is capable of
> +  generating inividual interrupt.

clockevent and clocksource are Linuxisms. Don't use them in bindings.

> +  Both the features are enabled through the timer general config register.
> +
> +  The parent node represents the common general configuration details and
> +  the child nodes represents the counter and timers.

I don't think all the child nodes are necessary. Are the counters and 
timers configurable (say on another SoC)? If not, then a single node 
here would suffice.

> +
> +properties:
> +  reg:
> +    description: General configuration register address and length.
> +    maxItems: 1
> +
> +  ranges: true
> +
> +  "#address-cells":
> +    const: 2
> +
> +  "#size-cells":
> +    const: 2
> +
> +required:
> +  - reg
> +  - ranges
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +patternProperties:
> +  "^counter@[0-9a-f]+$":
> +    type: object
> +    description: Properties for Intel Keem Bay counter
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - intel,keembay-counter
> +
> +      reg:
> +        maxItems: 1
> +
> +      clocks:
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - clocks
> +
> +  "^timer@[0-9a-f]+$":
> +    type: object
> +    description: Properties for Intel Keem Bay timer
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - intel,keembay-timer
> +
> +      reg:
> +        maxItems: 1
> +
> +      interrupts:
> +        maxItems: 1
> +
> +      clocks:
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - interrupts
> +      - clocks
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #define KEEM_BAY_A53_TIM
> +
> +    soc {
> +        #address-cells = <0x2>;
> +        #size-cells = <0x2>;
> +
> +        gpt@20331000 {
> +            reg = <0x0 0x20331000 0x0 0xc>;
> +            ranges = <0x0 0x0 0x20330000 0xF0>;
> +            #address-cells = <0x1>;
> +            #size-cells = <0x1>;
> +
> +            counter@203300e8 {

The unit address here is wrong. Should be 'e8'.

> +                compatible = "intel,keembay-counter";
> +                reg = <0xe8 0x8>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330010 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x10 0xc>;
> +                interrupts = <GIC_SPI 0x3 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330020 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x20 0xc>;
> +                interrupts = <GIC_SPI 0x4 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330030 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x30 0xc>;
> +                interrupts = <GIC_SPI 0x5 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330040 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x40 0xc>;
> +                interrupts = <GIC_SPI 0x6 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330050 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x50 0xc>;
> +                interrupts = <GIC_SPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330060 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x60 0xc>;
> +                interrupts = <GIC_SPI 0x8 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330070 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x70 0xc>;
> +                interrupts = <GIC_SPI 0x9 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +
> +            timer@20330080 {
> +                compatible = "intel,keembay-timer";
> +                reg = <0x80 0xc>;
> +                interrupts = <GIC_SPI 0xa IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&scmi_clk KEEM_BAY_A53_TIM>;
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.17.1
> 
>