All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	frieder.schrempf@kontron.de, tharvey@gateworks.com,
	Fabio Estevam <festevam@gmail.com>
Subject: [PATCH 2/2] arm64: dts: imx8mm-venice: Fix the SPI chipselect polarity
Date: Fri, 16 Jul 2021 10:28:45 -0300	[thread overview]
Message-ID: <20210716132845.3371666-2-festevam@gmail.com> (raw)
In-Reply-To: <20210716132845.3371666-1-festevam@gmail.com>

The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee28 ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
    
[    4.854337] m25p80@0 enforce active low on chipselect handle
   
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
    
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
    
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
    
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 905b68a3daa5..138bb8c9bf56 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -57,7 +57,7 @@ reg_usb_otg1_vbus: regulator-usb-otg1 {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index b7c91bdc21dd..27afa46a253a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -76,7 +76,7 @@ reg_usb_otg2_vbus: regulator-usb-otg2 {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index d2ffd62a3bd4..a59e849c7be2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -96,7 +96,7 @@ reg_wifi_en: regulator-wifi-en {
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spi2>;
-	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-07-16 13:31 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16 13:28 [PATCH 1/2] arm64: dts: imx8mm-kontron-n801x-som: Fix the SPI chipselect polarity Fabio Estevam
2021-07-16 13:28 ` Fabio Estevam [this message]
2021-07-16 14:51   ` [PATCH 2/2] arm64: dts: imx8mm-venice: " Tim Harvey
2021-07-19 10:55 ` [PATCH 1/2] arm64: dts: imx8mm-kontron-n801x-som: " Frieder Schrempf
2021-08-14 13:25   ` Fabio Estevam
2021-09-22  1:22     ` Shawn Guo
2021-09-22  2:58 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210716132845.3371666-2-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=frieder.schrempf@kontron.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=shawnguo@kernel.org \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.