[PULL 5/5] hw/net: e1000e: Don't zero out the VLAN tag in the legacy RX descriptor

[Jason Wang <jasowang@redhat.com>]

From: Christina Wang <christina.wang@windriver.com>

In the legacy RX descriptor mode, VLAN tag was saved to d->special
by e1000e_build_rx_metadata() in e1000e_write_lgcy_rx_descr(), but
it was then zeroed out again at the end of the call, which is wrong.

Fixes: c89d416a2b0f ("e1000e: Don't zero out buffer address in rx descriptor")
Reported-by: Markus Carlstedt <markus.carlstedt@windriver.com>
Signed-off-by: Christina Wang <christina.wang@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
 hw/net/e1000e_core.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c
index b4bf4ca..8ae6fb7 100644
--- a/hw/net/e1000e_core.c
+++ b/hw/net/e1000e_core.c
@@ -1285,7 +1285,6 @@ e1000e_write_lgcy_rx_descr(E1000ECore *core, uint8_t *desc,
                              &d->special);
     d->errors = (uint8_t) (le32_to_cpu(status_flags) >> 24);
     d->status = (uint8_t) le32_to_cpu(status_flags);
-    d->special = 0;
 }
 
 static inline void
-- 
2.7.4