From: Marian Csontos <mcsontos@sourceware.org>
To: lvm-devel@redhat.com
Subject: dev-next - make: generate
Date: Fri, 6 Aug 2021 12:03:23 +0000 (GMT) [thread overview]
Message-ID: <20210806120323.90CD4383D80F@sourceware.org> (raw)
Gitweb: https://sourceware.org/git/?p=lvm2.git;a=commitdiff;h=d99be296539e8c6ea38ab80677d267df6d4f9c65
Commit: d99be296539e8c6ea38ab80677d267df6d4f9c65
Parent: 7b87ffce2a5d635fb10bde3477847339b0ebb776
Author: Marian Csontos <mcsontos@redhat.com>
AuthorDate: Fri Aug 6 13:23:11 2021 +0200
Committer: Marian Csontos <mcsontos@redhat.com>
CommitterDate: Fri Aug 6 13:23:11 2021 +0200
make: generate
---
conf/example.conf.in | 278 ++++++++++++++++++++++++++++---------------
man/lvchange.8_pregen | 14 +++
man/lvconvert.8_pregen | 14 +++
man/lvcreate.8_pregen | 14 +++
man/lvdisplay.8_pregen | 12 ++
man/lvextend.8_pregen | 14 +++
man/lvm-fullreport.8_pregen | 12 ++
man/lvm-lvpoll.8_pregen | 12 ++
man/lvmconfig.8_pregen | 12 ++
man/lvmdevices.8_pregen | 14 +++
man/lvmdiskscan.8_pregen | 12 ++
man/lvreduce.8_pregen | 12 ++
man/lvremove.8_pregen | 12 ++
man/lvrename.8_pregen | 12 ++
man/lvresize.8_pregen | 14 +++
man/lvs.8_pregen | 12 ++
man/lvscan.8_pregen | 12 ++
man/pvchange.8_pregen | 12 ++
man/pvck.8_pregen | 14 +++
man/pvcreate.8_pregen | 12 ++
man/pvdisplay.8_pregen | 12 ++
man/pvmove.8_pregen | 12 ++
man/pvremove.8_pregen | 12 ++
man/pvresize.8_pregen | 12 ++
man/pvs.8_pregen | 12 ++
man/pvscan.8_pregen | 214 ++++++++++++++++++++++++++++++++-
man/vgcfgbackup.8_pregen | 12 ++
man/vgcfgrestore.8_pregen | 14 +++
man/vgchange.8_pregen | 14 +++
man/vgck.8_pregen | 12 ++
man/vgconvert.8_pregen | 12 ++
man/vgcreate.8_pregen | 12 ++
man/vgdisplay.8_pregen | 12 ++
man/vgexport.8_pregen | 12 ++
man/vgextend.8_pregen | 12 ++
man/vgimport.8_pregen | 12 ++
man/vgimportclone.8_pregen | 12 ++
man/vgimportdevices.8_pregen | 12 ++
man/vgmerge.8_pregen | 12 ++
man/vgmknodes.8_pregen | 12 ++
man/vgreduce.8_pregen | 14 +++
man/vgremove.8_pregen | 12 ++
man/vgrename.8_pregen | 12 ++
man/vgs.8_pregen | 12 ++
man/vgscan.8_pregen | 12 ++
man/vgsplit.8_pregen | 12 ++
46 files changed, 936 insertions(+), 104 deletions(-)
diff --git a/conf/example.conf.in b/conf/example.conf.in
index 50cf6f42b..df6174bb6 100644
--- a/conf/example.conf.in
+++ b/conf/example.conf.in
@@ -33,15 +33,18 @@ config {
# any configuration mismatch is ignored and the default value is used
# without any warning (a message about the configuration key not being
# found is issued in verbose mode only).
- checks = 1
+ # This configuration option has an automatic default value.
+ # checks = 1
# Configuration option config/abort_on_errors.
# Abort the LVM process if a configuration mismatch is found.
- abort_on_errors = 0
+ # This configuration option has an automatic default value.
+ # abort_on_errors = 0
# Configuration option config/profile_dir.
# Directory where LVM looks for configuration profiles.
- profile_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_PROFILE_SUBDIR@"
+ # This configuration option has an automatic default value.
+ # profile_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_PROFILE_SUBDIR@"
}
# Configuration section devices.
@@ -52,12 +55,14 @@ devices {
# Directory in which to create volume group device nodes.
# Commands also accept this as a prefix on volume group names.
# This configuration option is advanced.
- dir = "/dev"
+ # This configuration option has an automatic default value.
+ # dir = "/dev"
# Configuration option devices/scan.
# Directories containing device nodes to use with LVM.
# This configuration option is advanced.
- scan = [ "/dev" ]
+ # This configuration option has an automatic default value.
+ # scan = [ "/dev" ]
# Configuration option devices/obtain_device_list_from_udev.
# Obtain the list of available devices from udev.
@@ -67,26 +72,16 @@ devices {
# setting applies only to the udev-managed device directory; other
# directories will be scanned fully. LVM needs to be compiled with
# udev support for this setting to apply.
- obtain_device_list_from_udev = 1
+ # This configuration option has an automatic default value.
+ # obtain_device_list_from_udev = 0
# Configuration option devices/external_device_info_source.
- # Select an external device information source.
- # Some information may already be available in the system and LVM can
- # use this information to determine the exact type or use of devices it
- # processes. Using an existing external device information source can
- # speed up device processing as LVM does not need to run its own native
- # routines to acquire this information. For example, this information
- # is used to drive LVM filtering like MD component detection, multipath
- # component detection, partition detection and others.
- #
- # Accepted values:
- # none
- # No external device information source is used.
- # udev
- # Reuse existing udev database records. Applicable only if LVM is
- # compiled with udev support.
- #
- external_device_info_source = "none"
+ # Enable device information from udev.
+ # If set to "udev", lvm will supplement its own native device information
+ # with information from libudev. This can potentially improve the detection
+ # of MD component devices and multipath component devices.
+ # This configuration option has an automatic default value.
+ # external_device_info_source = "none"
# Configuration option devices/hints.
# Use a local file to remember which devices have PVs on them.
@@ -131,7 +126,7 @@ devices {
# be used, regardless of this setting, when the --devicesfile
# option is set to a specific file name.
# This configuration option has an automatic default value.
- # use_devicesfile = 0
+ # use_devicesfile = 1
# Configuration option devices/devicesfile.
# The name of the system devices file, listing devices that LVM should use.
@@ -212,7 +207,8 @@ devices {
# Restrict device scanning to block devices appearing in sysfs.
# This is a quick way of filtering out block devices that are not
# present on the system. sysfs must be part of the kernel and mounted.)
- sysfs_scan = 1
+ # This configuration option has an automatic default value.
+ # sysfs_scan = 1
# Configuration option devices/scan_lvs.
# Scan LVM LVs for layered PVs, allowing LVs to be used as PVs.
@@ -226,11 +222,19 @@ devices {
# use PVs that exist on LVs, and will not allow a PV to be created on
# an LV. The LVs are ignored using a built in device filter that
# identifies and excludes LVs.
- scan_lvs = 0
+ # This configuration option has an automatic default value.
+ # scan_lvs = 0
# Configuration option devices/multipath_component_detection.
# Ignore devices that are components of DM multipath devices.
- multipath_component_detection = 1
+ # This configuration option has an automatic default value.
+ # multipath_component_detection = 1
+
+ # Configuration option devices/multipath_wwids_file.
+ # The path to the multipath wwids file used for multipath component detection.
+ # Set this to an empty string to disable the use of the multipath wwids file.
+ # This configuration option has an automatic default value.
+ # multipath_wwids_file = "/etc/multipath/wwids"
# Configuration option devices/md_component_detection.
# Enable detection and exclusion of MD component devices.
@@ -241,7 +245,8 @@ devices {
# In cases where the MD superblock is located at the end of the
# component devices, it is more difficult for LVM to consistently
# identify an MD component, see the md_component_checks setting.
- md_component_detection = 1
+ # This configuration option has an automatic default value.
+ # md_component_detection = 1
# Configuration option devices/md_component_checks.
# The checks LVM should use to detect MD component devices.
@@ -265,7 +270,8 @@ devices {
# Ignore devices that are components of firmware RAID devices.
# LVM must use an external_device_info_source other than none for this
# detection to execute.
- fw_raid_component_detection = 0
+ # This configuration option has an automatic default value.
+ # fw_raid_component_detection = 0
# Configuration option devices/md_chunk_alignment.
# Align the start of a PV data area with md device's stripe-width.
@@ -274,7 +280,8 @@ devices {
# with the value detected for this setting.
# This setting is overridden by data_alignment_detection,
# data_alignment, and the --dataalignment option.
- md_chunk_alignment = 1
+ # This configuration option has an automatic default value.
+ # md_chunk_alignment = 1
# Configuration option devices/default_data_alignment.
# Align the start of a PV data area with this number of MiB.
@@ -297,7 +304,8 @@ devices {
# if they are not aligned with the value detected for this setting.
# This setting is overridden by data_alignment and the --dataalignment
# option.
- data_alignment_detection = 1
+ # This configuration option has an automatic default value.
+ # data_alignment_detection = 1
# Configuration option devices/data_alignment.
# Align the start of a PV data area with this number of KiB.
@@ -305,7 +313,8 @@ devices {
# Set to 0 to disable, in which case default_data_alignment
# is used to align the first PE in units of MiB.
# This setting is overridden by the --dataalignment option.
- data_alignment = 0
+ # This configuration option has an automatic default value.
+ # data_alignment = 0
# Configuration option devices/data_alignment_offset_detection.
# Shift the start of an aligned PV data area based on sysfs information.
@@ -316,13 +325,15 @@ devices {
# is the lowest aligned logical block, the 4KiB sectors start at
# LBA -1, and consequently sector 63 is aligned on a 4KiB boundary).
# This setting is overridden by the --dataalignmentoffset option.
- data_alignment_offset_detection = 1
+ # This configuration option has an automatic default value.
+ # data_alignment_offset_detection = 1
# Configuration option devices/ignore_suspended_devices.
# Ignore DM devices that have I/O suspended while scanning devices.
# Otherwise, LVM waits for a suspended device to become accessible.
# This should only be needed in recovery situations.
- ignore_suspended_devices = 0
+ # This configuration option has an automatic default value.
+ # ignore_suspended_devices = 0
# Configuration option devices/ignore_lvm_mirrors.
# Do not scan 'mirror' LVs to avoid possible deadlocks.
@@ -341,18 +352,21 @@ devices {
# a scan of the mirror's labels. The 'mirror' scanning problems do not
# apply to LVM RAID types like 'raid1' which handle failures in a
# different way, making them a better choice for VG stacking.
- ignore_lvm_mirrors = 1
+ # This configuration option has an automatic default value.
+ # ignore_lvm_mirrors = 1
# Configuration option devices/require_restorefile_with_uuid.
# Allow use of pvcreate --uuid without requiring --restorefile.
- require_restorefile_with_uuid = 1
+ # This configuration option has an automatic default value.
+ # require_restorefile_with_uuid = 1
# Configuration option devices/pv_min_size.
# Minimum size in KiB of block devices which can be used as PVs.
# In a clustered environment all nodes must use the same value.
# Any value smaller than 512KiB is ignored. The previous built-in
# value was 512.
- pv_min_size = 2048
+ # This configuration option has an automatic default value.
+ # pv_min_size = 2048
# Configuration option devices/issue_discards.
# Issue discards to PVs that are no longer used by an LV.
@@ -365,7 +379,8 @@ devices {
# benefit from discards, but SSDs and thinly provisioned LUNs
# generally do. If enabled, discards will only be issued if both the
# storage and kernel provide support.
- issue_discards = 0
+ # This configuration option has an automatic default value.
+ # issue_discards = 0
# Configuration option devices/allow_changes_with_duplicate_pvs.
# Allow VG modification while a PV appears on multiple devices.
@@ -378,13 +393,15 @@ devices {
# or activating LVs in it while a PV appears on multiple devices.
# Enabling this setting allows the VG to be used as usual even with
# uncertain devices.
- allow_changes_with_duplicate_pvs = 0
+ # This configuration option has an automatic default value.
+ # allow_changes_with_duplicate_pvs = 0
# Configuration option devices/allow_mixed_block_sizes.
# Allow PVs in the same VG with different logical block sizes.
# When allowed, the user is responsible to ensure that an LV is
# using PVs with matching block sizes when necessary.
- allow_mixed_block_sizes = 0
+ # This configuration option has an automatic default value.
+ # allow_mixed_block_sizes = 0
}
# Configuration section allocation.
@@ -416,7 +433,8 @@ allocation {
# policies to detect more situations where data can be grouped onto
# the same disks. This setting can be used to disable the changes
# and revert to the previous algorithm.
- maximise_cling = 1
+ # This configuration option has an automatic default value.
+ # maximise_cling = 1
# Configuration option allocation/use_blkid_wiping.
# Use blkid to detect and erase existing signatures on new PVs and LVs.
@@ -426,7 +444,8 @@ allocation {
# code is currently able to recognize: MD device signatures,
# swap signature, and LUKS signatures. To see the list of signatures
# recognized by blkid, check the output of the 'blkid -k' command.
- use_blkid_wiping = @DEFAULT_USE_BLKID_WIPING@
+ # This configuration option has an automatic default value.
+ # use_blkid_wiping = @DEFAULT_USE_BLKID_WIPING@
# Configuration option allocation/wipe_signatures_when_zeroing_new_lvs.
# Look for and erase any signatures while zeroing a new LV.
@@ -443,12 +462,14 @@ allocation {
# use_blkid_wiping.) Wiping each detected signature must be confirmed.
# When this setting is disabled, signatures on new LVs are not detected
# or erased unless the --wipesignatures option is used directly.
- wipe_signatures_when_zeroing_new_lvs = 1
+ # This configuration option has an automatic default value.
+ # wipe_signatures_when_zeroing_new_lvs = 1
# Configuration option allocation/mirror_logs_require_separate_pvs.
# Mirror logs and images will always use different PVs.
# The default setting changed in version 2.02.85.
- mirror_logs_require_separate_pvs = 0
+ # This configuration option has an automatic default value.
+ # mirror_logs_require_separate_pvs = 0
# Configuration option allocation/raid_stripe_all_devices.
# Stripe across all PVs when RAID stripes are not specified.
@@ -795,7 +816,8 @@ log {
# Configuration option log/verbose.
# Controls the messages sent to stdout or stderr.
- verbose = 0
+ # This configuration option has an automatic default value.
+ # verbose = 0
# Configuration option log/silent.
# Suppress all non-essential messages from stdout.
@@ -806,25 +828,37 @@ log {
# for syslog and lvm2_log_fn purposes.
# Any 'yes' or 'no' questions not overridden by other arguments are
# suppressed and default to 'no'.
- silent = 0
+ # This configuration option has an automatic default value.
+ # silent = 0
# Configuration option log/syslog.
# Send log messages through syslog.
- syslog = 1
+ # This configuration option has an automatic default value.
+ # syslog = 1
# Configuration option log/file.
# Write error and debug log messages to a file specified here.
# This configuration option does not have a default value defined.
+ # Configuration option log/journal.
+ # Record lvm information in the systemd journal.
+ # command: record commands that are run.
+ # output: record default output from commands.
+ # debug: record debug messages from commands.
+ # This configuration option has an automatic default value.
+ # journal = [ ]
+
# Configuration option log/overwrite.
# Overwrite the log file each time the program is run.
- overwrite = 0
+ # This configuration option has an automatic default value.
+ # overwrite = 0
# Configuration option log/level.
# The level of log messages that are sent to the log file or syslog.
# There are 6 syslog-like log levels currently in use: 2 to 7 inclusive.
# 7 is the most verbose (LOG_DEBUG).
- level = 0
+ # This configuration option has an automatic default value.
+ # level = 0
# Configuration option log/indent.
# Indent messages according to their severity.
@@ -833,7 +867,8 @@ log {
# Configuration option log/command_names.
# Display the command name on each line of output.
- command_names = 0
+ # This configuration option has an automatic default value.
+ # command_names = 0
# Configuration option log/prefix.
# A prefix to use before the log message text.
@@ -841,12 +876,14 @@ log {
# Two spaces allows you to see/grep the severity of each message.
# To make the messages look similar to the original LVM tools use:
# indent = 0, command_names = 1, prefix = " -- "
- prefix = " "
+ # This configuration option has an automatic default value.
+ # prefix = " "
# Configuration option log/activation.
# Log messages during activation.
# Don't use this in low memory situations (can deadlock).
- activation = 0
+ # This configuration option has an automatic default value.
+ # activation = 0
# Configuration option log/debug_classes.
# Select log messages by class.
@@ -854,7 +891,8 @@ log {
# debug output if the class is listed here. Classes currently
# available: memory, devices, io, activation, allocation,
# metadata, cache, locking, lvmpolld. Use "all" to see everything.
- debug_classes = [ "memory", "devices", "io", "activation", "allocation", "metadata", "cache", "locking", "lvmpolld", "dbus" ]
+ # This configuration option has an automatic default value.
+ # debug_classes = [ "memory", "devices", "io", "activation", "allocation", "metadata", "cache", "locking", "lvmpolld", "dbus" ]
# Configuration option log/debug_file_fields.
# The fields included in debug output written to log file.
@@ -881,30 +919,36 @@ backup {
# Configuration option backup/backup.
# Maintain a backup of the current metadata configuration.
# Think very hard before turning this off!
- backup = 1
+ # This configuration option has an automatic default value.
+ # backup = 1
# Configuration option backup/backup_dir.
# Location of the metadata backup files.
# Remember to back up this directory regularly!
- backup_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_BACKUP_SUBDIR@"
+ # This configuration option has an automatic default value.
+ # backup_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_BACKUP_SUBDIR@"
# Configuration option backup/archive.
# Maintain an archive of old metadata configurations.
# Think very hard before turning this off.
- archive = 1
+ # This configuration option has an automatic default value.
+ # archive = 1
# Configuration option backup/archive_dir.
# Location of the metdata archive files.
# Remember to back up this directory regularly!
- archive_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_ARCHIVE_SUBDIR@"
+ # This configuration option has an automatic default value.
+ # archive_dir = "@DEFAULT_SYS_DIR@/@DEFAULT_ARCHIVE_SUBDIR@"
# Configuration option backup/retain_min.
# Minimum number of archives to keep.
- retain_min = 10
+ # This configuration option has an automatic default value.
+ # retain_min = 10
# Configuration option backup/retain_days.
# Minimum number of days to keep archive files.
- retain_days = 30
+ # This configuration option has an automatic default value.
+ # retain_days = 30
}
# Configuration section shell.
@@ -913,7 +957,8 @@ shell {
# Configuration option shell/history_size.
# Number of lines of history to store in ~/.lvm_history.
- history_size = 100
+ # This configuration option has an automatic default value.
+ # history_size = 100
}
# Configuration section global.
@@ -923,16 +968,19 @@ global {
# Configuration option global/umask.
# The file creation mask for any files and directories created.
# Interpreted as octal if the first digit is zero.
- umask = 077
+ # This configuration option has an automatic default value.
+ # umask = 077
# Configuration option global/test.
# No on-disk metadata changes will be made in test mode.
# Equivalent to having the -t option on every command.
- test = 0
+ # This configuration option has an automatic default value.
+ # test = 0
# Configuration option global/units.
# Default value for --units argument.
- units = "r"
+ # This configuration option has an automatic default value.
+ # units = "r"
# Configuration option global/si_unit_consistency.
# Distinguish between powers of 1024 and 1000 bytes.
@@ -940,13 +988,15 @@ global {
# e.g. KiB, MiB, GiB, and powers of 1000 bytes, e.g. KB, MB, GB.
# If scripts depend on the old behaviour, disable this setting
# temporarily until they are updated.
- si_unit_consistency = 1
+ # This configuration option has an automatic default value.
+ # si_unit_consistency = 1
# Configuration option global/suffix.
# Display unit suffix for sizes.
# This setting has no effect if the units are in human-readable form
# (global/units = "h") in which case the suffix is always displayed.
- suffix = 1
+ # This configuration option has an automatic default value.
+ # suffix = 1
# Configuration option global/activation.
# Enable/disable communication with the kernel device-mapper.
@@ -954,26 +1004,31 @@ global {
# activating any logical volumes. If the device-mapper driver
# is not present in the kernel, disabling this should suppress
# the error messages.
- activation = 1
+ # This configuration option has an automatic default value.
+ # activation = 1
# Configuration option global/proc.
# Location of proc filesystem.
# This configuration option is advanced.
- proc = "/proc"
+ # This configuration option has an automatic default value.
+ # proc = "/proc"
# Configuration option global/etc.
# Location of /etc system configuration directory.
- etc = "@CONFDIR@"
+ # This configuration option has an automatic default value.
+ # etc = "@CONFDIR@"
# Configuration option global/wait_for_locks.
# When disabled, fail if a lock request would block.
- wait_for_locks = 1
+ # This configuration option has an automatic default value.
+ # wait_for_locks = 1
# Configuration option global/locking_dir.
# Directory to use for LVM command file locks.
# Local non-LV directory that holds file-based locks while commands are
# in progress. A directory like /tmp that may get wiped on reboot is OK.
- locking_dir = "@DEFAULT_LOCK_DIR@"
+ # This configuration option has an automatic default value.
+ # locking_dir = "@DEFAULT_LOCK_DIR@"
# Configuration option global/prioritise_write_locks.
# Allow quicker VG write access during high volume read access.
@@ -982,7 +1037,8 @@ global {
# requests immediately, delay them to allow the read-write requests to
# be serviced. Without this setting, write access may be stalled by a
# high volume of read-only requests. This option only affects file locks.
- prioritise_write_locks = 1
+ # This configuration option has an automatic default value.
+ # prioritise_write_locks = 1
# Configuration option global/library_dir.
# Search this directory first for shared libraries.
@@ -992,7 +1048,8 @@ global {
# Abort a command that encounters an internal error.
# Treat any internal errors as fatal errors, aborting the process that
# encountered the internal error. Please only enable for debugging.
- abort_on_internal_errors = 0
+ # This configuration option has an automatic default value.
+ # abort_on_internal_errors = 0
# Configuration option global/metadata_read_only.
# No operations that change on-disk metadata are permitted.
@@ -1000,7 +1057,8 @@ global {
# repair will still be allowed to proceed exactly as if the repair had
# been performed (except for the unchanged vg_seqno). Inappropriate
# use could mess up your system, so seek advice first!
- metadata_read_only = 0
+ # This configuration option has an automatic default value.
+ # metadata_read_only = 0
# Configuration option global/mirror_segtype_default.
# The segment type used by the short mirroring option -m.
@@ -1026,7 +1084,8 @@ global {
# cluster-aware and cannot be used in a shared (active/active)
# fashion in a cluster.
#
- mirror_segtype_default = "@DEFAULT_MIRROR_SEGTYPE@"
+ # This configuration option has an automatic default value.
+ # mirror_segtype_default = "@DEFAULT_MIRROR_SEGTYPE@"
# Configuration option global/support_mirrored_mirror_log.
# Enable mirrored 'mirror' log type for testing.
@@ -1056,7 +1115,8 @@ global {
# effectively creating a RAID 0+1 array. The layering is suboptimal
# in terms of providing redundancy and performance.
#
- raid10_segtype_default = "@DEFAULT_RAID10_SEGTYPE@"
+ # This configuration option has an automatic default value.
+ # raid10_segtype_default = "@DEFAULT_RAID10_SEGTYPE@"
# Configuration option global/sparse_segtype_default.
# The segment type used by the -V -L combination.
@@ -1076,7 +1136,8 @@ global {
# metadata. It has better performance, especially when more data
# is used. It also supports full snapshots.
#
- sparse_segtype_default = "@DEFAULT_SPARSE_SEGTYPE@"
+ # This configuration option has an automatic default value.
+ # sparse_segtype_default = "@DEFAULT_SPARSE_SEGTYPE@"
# Configuration option global/lvdisplay_shows_full_device_path.
# Enable this to reinstate the previous lvdisplay name format.
@@ -1111,7 +1172,8 @@ global {
# Applicable only if LVM is compiled with lockd support in which
# case there is also lvmlockd(8) man page available for more
# information.
- use_lvmlockd = 0
+ # This configuration option has an automatic default value.
+ # use_lvmlockd = 0
# Configuration option global/lvmlockd_lock_retries.
# Retry lvmlockd lock requests this many times.
@@ -1284,15 +1346,18 @@ global {
# uname
# Set the system ID from the hostname (uname) of the system.
# System IDs beginning localhost are not permitted.
+ # appmachineid
+ # Use an LVM-specific derivation of the local machine-id as the
+ # system ID. See 'man machine-id'.
# machineid
- # Use the contents of the machine-id file to set the system ID.
- # Some systems create this file at installation time.
- # See 'man machine-id' and global/etc.
+ # Use the contents of the machine-id file to set the system ID
+ # (appmachineid is recommended.)
# file
# Use the contents of another file (system_id_file) to set the
# system ID.
#
- system_id_source = "none"
+ # This configuration option has an automatic default value.
+ # system_id_source = "none"
# Configuration option global/system_id_file.
# The full path to the file containing a system ID.
@@ -1312,13 +1377,15 @@ global {
# and to use its own control group. When this option is disabled, LVM
# commands will supervise long running operations by forking themselves.
# Applicable only if LVM is compiled with lvmpolld support.
- use_lvmpolld = @DEFAULT_USE_LVMPOLLD@
+ # This configuration option has an automatic default value.
+ # use_lvmpolld = @DEFAULT_USE_LVMPOLLD@
# Configuration option global/notify_dbus.
# Enable D-Bus notification from LVM commands.
# When enabled, an LVM command that changes PVs, changes VG metadata,
# or changes the activation state of an LV will send a notification.
- notify_dbus = 1
+ # This configuration option has an automatic default value.
+ # notify_dbus = 1
# Configuration option global/io_memory_size.
# The amount of memory in KiB that LVM allocates to perform disk io.
@@ -1339,7 +1406,8 @@ activation {
# Useful for debugging problems with activation. Some of the checks may
# be expensive, so it's best to use this only when there seems to be a
# problem.
- checks = 0
+ # This configuration option has an automatic default value.
+ # checks = 0
# Configuration option activation/udev_sync.
# Use udev notifications to synchronize udev and LVM.
@@ -1350,14 +1418,16 @@ activation {
# that ignore the devices LVM creates. If enabled when udev is not
# running, and LVM processes are waiting for udev, run the command
# 'dmsetup udevcomplete_all' to wake them up.
- udev_sync = 1
+ # This configuration option has an automatic default value.
+ # udev_sync = 1
# Configuration option activation/udev_rules.
# Use udev rules to manage LV device nodes and symlinks.
# When disabled, LVM will manage the device nodes and symlinks for
# active LVs itself. Manual intervention may be required if this
# setting is changed while LVs are active.
- udev_rules = 1
+ # This configuration option has an automatic default value.
+ # udev_rules = 1
# Configuration option activation/verify_udev_operations.
# Use extra checks in LVM to verify udev operations.
@@ -1372,7 +1442,8 @@ activation {
# If LV deactivation fails, LVM will retry for a few seconds before
# failing. This may happen because a process run from a quick udev rule
# temporarily opened the device.
- retry_deactivation = 1
+ # This configuration option has an automatic default value.
+ # retry_deactivation = 1
# Configuration option activation/missing_stripe_filler.
# Method to fill missing stripes when activating an incomplete LV.
@@ -1383,7 +1454,8 @@ activation {
# other than 'error' with mirrored or snapshotted volumes is likely to
# result in data corruption.
# This configuration option is advanced.
- missing_stripe_filler = "error"
+ # This configuration option has an automatic default value.
+ # missing_stripe_filler = "error"
# Configuration option activation/use_linear_target.
# Use the linear target to optimize single stripe LVs.
@@ -1505,7 +1577,8 @@ activation {
# The clean/dirty state of data is tracked for each region.
# The value is rounded down to a power of two if necessary, and
# is ignored if it is not a multiple of the machine memory page size.
- raid_region_size = 2048
+ # This configuration option has an automatic default value.
+ # raid_region_size = 2048
# Configuration option activation/error_when_full.
# Return errors if a thin pool runs out of space.
@@ -1550,7 +1623,8 @@ activation {
# Attempt to use any extra physical volumes in the VG as spares and
# replace faulty devices.
#
- raid_fault_policy = "warn"
+ # This configuration option has an automatic default value.
+ # raid_fault_policy = "warn"
# Configuration option activation/mirror_image_fault_policy.
# Defines how a device failure in a 'mirror' LV is handled.
@@ -1587,13 +1661,15 @@ activation {
# 'remove' if no suitable device and space can be allocated for the
# replacement.
#
- mirror_image_fault_policy = "remove"
+ # This configuration option has an automatic default value.
+ # mirror_image_fault_policy = "remove"
# Configuration option activation/mirror_log_fault_policy.
# Defines how a device failure in a 'mirror' log LV is handled.
# The mirror_image_fault_policy description for mirrored LVs also
# applies to mirrored log LVs.
- mirror_log_fault_policy = "allocate"
+ # This configuration option has an automatic default value.
+ # mirror_log_fault_policy = "allocate"
# Configuration option activation/snapshot_autoextend_threshold.
# Auto-extend a snapshot when its usage exceeds this percent.
@@ -1608,7 +1684,8 @@ activation {
# 840M, it is extended to 1.44G:
# snapshot_autoextend_threshold = 70
#
- snapshot_autoextend_threshold = 100
+ # This configuration option has an automatic default value.
+ # snapshot_autoextend_threshold = 100
# Configuration option activation/snapshot_autoextend_percent.
# Auto-extending a snapshot adds this percent extra space.
@@ -1621,7 +1698,8 @@ activation {
# 840M, it is extended to 1.44G:
# snapshot_autoextend_percent = 20
#
- snapshot_autoextend_percent = 20
+ # This configuration option has an automatic default value.
+ # snapshot_autoextend_percent = 20
# Configuration option activation/thin_pool_autoextend_threshold.
# Auto-extend a thin pool when its usage exceeds this percent.
@@ -1636,7 +1714,8 @@ activation {
# 840M, it is extended to 1.44G:
# thin_pool_autoextend_threshold = 70
#
- thin_pool_autoextend_threshold = 100
+ # This configuration option has an automatic default value.
+ # thin_pool_autoextend_threshold = 100
# Configuration option activation/thin_pool_autoextend_percent.
# Auto-extending a thin pool adds this percent extra space.
@@ -1649,7 +1728,8 @@ activation {
# 840M, it is extended to 1.44G:
# thin_pool_autoextend_percent = 20
#
- thin_pool_autoextend_percent = 20
+ # This configuration option has an automatic default value.
+ # thin_pool_autoextend_percent = 20
# Configuration option activation/vdo_pool_autoextend_threshold.
# Auto-extend a VDO pool when its usage exceeds this percent.
@@ -1708,7 +1788,8 @@ activation {
# Monitor LVs that are activated.
# The --ignoremonitoring option overrides this setting.
# When enabled, LVM will ask dmeventd to monitor activated LVs.
- monitoring = 1
+ # This configuration option has an automatic default value.
+ # monitoring = 1
# Configuration option activation/polling_interval.
# Check pvmove or lvconvert progress at this interval (seconds).
@@ -1750,7 +1831,8 @@ activation {
# This setting should not normally be used, but may sometimes
# assist with data recovery.
#
- activation_mode = "degraded"
+ # This configuration option has an automatic default value.
+ # activation_mode = "degraded"
# Configuration option activation/lock_start_list.
# Locking is started only for VGs selected by this list.
diff --git a/man/lvchange.8_pregen b/man/lvchange.8_pregen
index 3cfa7330d..242246570 100644
--- a/man/lvchange.8_pregen
+++ b/man/lvchange.8_pregen
@@ -66,6 +66,8 @@ lvchange \(em Change the attributes of logical volume(s)
\fB--ignorelockingfailure\fP
.br
\fB--ignoremonitoring\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -419,6 +421,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -674,6 +678,16 @@ Do not interact with dmeventd unless --monitor is specified.
Do not use this if dmeventd is already monitoring a device.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvconvert.8_pregen b/man/lvconvert.8_pregen
index 4fafe5d29..f5f2bfd2d 100644
--- a/man/lvconvert.8_pregen
+++ b/man/lvconvert.8_pregen
@@ -66,6 +66,8 @@ lvconvert \(em Change logical volume layout
\fB-h\fP|\fB--help\fP
.br
\fB-i\fP|\fB--interval\fP \fINumber\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -963,6 +965,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -1183,6 +1187,16 @@ Display help text.
Report progress at regular intervals.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvcreate.8_pregen b/man/lvcreate.8_pregen
index b642ad0c2..513ef0539 100644
--- a/man/lvcreate.8_pregen
+++ b/man/lvcreate.8_pregen
@@ -74,6 +74,8 @@ lvcreate \(em Create a logical volume
\fB-K\fP|\fB--ignoreactivationskip\fP
.br
\fB--ignoremonitoring\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -805,6 +807,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -1075,6 +1079,16 @@ Do not interact with dmeventd unless --monitor is specified.
Do not use this if dmeventd is already monitoring a device.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvdisplay.8_pregen b/man/lvdisplay.8_pregen
index 8ff34bc08..011857c81 100644
--- a/man/lvdisplay.8_pregen
+++ b/man/lvdisplay.8_pregen
@@ -110,6 +110,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -228,6 +230,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvextend.8_pregen b/man/lvextend.8_pregen
index fa0aec63a..1409adadf 100644
--- a/man/lvextend.8_pregen
+++ b/man/lvextend.8_pregen
@@ -38,6 +38,8 @@ lvextend \(em Add space to a logical volume
\fB-f\fP|\fB--force\fP
.br
\fB-h\fP|\fB--help\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -251,6 +253,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -373,6 +377,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvm-fullreport.8_pregen b/man/lvm-fullreport.8_pregen
index 399d4ff9a..a93e9cf1c 100644
--- a/man/lvm-fullreport.8_pregen
+++ b/man/lvm-fullreport.8_pregen
@@ -106,6 +106,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -202,6 +204,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvm-lvpoll.8_pregen b/man/lvm-lvpoll.8_pregen
index cf18ebeec..4c6cd3075 100644
--- a/man/lvm-lvpoll.8_pregen
+++ b/man/lvm-lvpoll.8_pregen
@@ -62,6 +62,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -147,6 +149,16 @@ Display help text.
Report progress at regular intervals.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvmconfig.8_pregen b/man/lvmconfig.8_pregen
index 6cdb577c1..bcbe3e63d 100644
--- a/man/lvmconfig.8_pregen
+++ b/man/lvmconfig.8_pregen
@@ -103,6 +103,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -204,6 +206,16 @@ and \fBdiff\fP types include unsupported settings in their output by default,
all the other types ignore unsupported settings.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB-l\fP|\fB--list\fP
.br
List config settings with summarizing comment. This is the same as using
diff --git a/man/lvmdevices.8_pregen b/man/lvmdevices.8_pregen
index e581a8d01..0506991a1 100644
--- a/man/lvmdevices.8_pregen
+++ b/man/lvmdevices.8_pregen
@@ -37,6 +37,8 @@ lvmdevices \(em Manage the devices file
\fB--driverloaded\fP \fBy\fP|\fBn\fP
.br
\fB-h\fP|\fB--help\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -284,6 +286,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -379,6 +383,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvmdiskscan.8_pregen b/man/lvmdiskscan.8_pregen
index 5f31e8115..0f1f0f58c 100644
--- a/man/lvmdiskscan.8_pregen
+++ b/man/lvmdiskscan.8_pregen
@@ -60,6 +60,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -123,6 +125,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvreduce.8_pregen b/man/lvreduce.8_pregen
index 0a659e1c8..a5a9e8b69 100644
--- a/man/lvreduce.8_pregen
+++ b/man/lvreduce.8_pregen
@@ -82,6 +82,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -179,6 +181,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvremove.8_pregen b/man/lvremove.8_pregen
index a5ed82666..aa3dd78bb 100644
--- a/man/lvremove.8_pregen
+++ b/man/lvremove.8_pregen
@@ -88,6 +88,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -163,6 +165,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvrename.8_pregen b/man/lvrename.8_pregen
index 5b5975fa3..76702e871 100644
--- a/man/lvrename.8_pregen
+++ b/man/lvrename.8_pregen
@@ -72,6 +72,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -141,6 +143,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvresize.8_pregen b/man/lvresize.8_pregen
index 36c1760fc..a9dea81f5 100644
--- a/man/lvresize.8_pregen
+++ b/man/lvresize.8_pregen
@@ -38,6 +38,8 @@ lvresize \(em Resize a logical volume
\fB-f\fP|\fB--force\fP
.br
\fB-h\fP|\fB--help\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -209,6 +211,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -331,6 +335,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvs.8_pregen b/man/lvs.8_pregen
index d822347a1..5207a32ad 100644
--- a/man/lvs.8_pregen
+++ b/man/lvs.8_pregen
@@ -106,6 +106,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -212,6 +214,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/lvscan.8_pregen b/man/lvscan.8_pregen
index 40438a7d2..fa318efa1 100644
--- a/man/lvscan.8_pregen
+++ b/man/lvscan.8_pregen
@@ -65,6 +65,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -146,6 +148,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/pvchange.8_pregen b/man/pvchange.8_pregen
index 577352d2a..ca3c0f3dd 100644
--- a/man/pvchange.8_pregen
+++ b/man/pvchange.8_pregen
@@ -109,6 +109,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -206,6 +208,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/pvck.8_pregen b/man/pvck.8_pregen
index 6e55916a3..76f4144a8 100644
--- a/man/pvck.8_pregen
+++ b/man/pvck.8_pregen
@@ -32,6 +32,8 @@ pvck \(em Check metadata on physical volumes
\fB-f\fP|\fB--file\fP \fIString\fP
.br
\fB-h\fP|\fB--help\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--labelsector\fP \fINumber\fP
.br
@@ -305,6 +307,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -389,6 +393,16 @@ Metadata file to read or write.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--labelsector\fP \fINumber\fP
.br
By default the PV is labelled with an LVM2 identifier in its second
diff --git a/man/pvcreate.8_pregen b/man/pvcreate.8_pregen
index 26e5141fe..9fb110678 100644
--- a/man/pvcreate.8_pregen
+++ b/man/pvcreate.8_pregen
@@ -158,6 +158,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -256,6 +258,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--labelsector\fP \fINumber\fP
.br
By default the PV is labelled with an LVM2 identifier in its second
diff --git a/man/pvdisplay.8_pregen b/man/pvdisplay.8_pregen
index ff5d9f50a..346b97d4a 100644
--- a/man/pvdisplay.8_pregen
+++ b/man/pvdisplay.8_pregen
@@ -108,6 +108,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -218,6 +220,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/pvmove.8_pregen b/man/pvmove.8_pregen
index a764ed9ca..2ec1b593d 100644
--- a/man/pvmove.8_pregen
+++ b/man/pvmove.8_pregen
@@ -112,6 +112,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -232,6 +234,16 @@ Display help text.
Report progress at regular intervals.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/pvremove.8_pregen b/man/pvremove.8_pregen
index b34f2a042..6ca29f55c 100644
--- a/man/pvremove.8_pregen
+++ b/man/pvremove.8_pregen
@@ -61,6 +61,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -130,6 +132,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/pvresize.8_pregen b/man/pvresize.8_pregen
index ea309b311..a94e0e5a5 100644
--- a/man/pvresize.8_pregen
+++ b/man/pvresize.8_pregen
@@ -56,6 +56,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -119,6 +121,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/pvs.8_pregen b/man/pvs.8_pregen
index 08b5600f5..00c501cfe 100644
--- a/man/pvs.8_pregen
+++ b/man/pvs.8_pregen
@@ -104,6 +104,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -202,6 +204,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/pvscan.8_pregen b/man/pvscan.8_pregen
index 8025d6c34..ec4189e10 100644
--- a/man/pvscan.8_pregen
+++ b/man/pvscan.8_pregen
@@ -6,12 +6,80 @@ pvscan \(em List all physical volumes
.
.SH SYNOPSIS
.
-\fBpvscan\fP \fIoption_args\fP
+\fBpvscan\fP \fIoption_args\fP \fIposition_args\fP
.br
[ \fIoption_args\fP ]
.br
[ \fIposition_args\fP ]
.br
+.P
+.ad l
+ \fB-a\fP|\fB--activate\fP \fBy\fP|\fBn\fP|\fBay\fP
+.br
+ \fB--cache\fP
+.br
+ \fB--checkcomplete\fP
+.br
+ \fB--commandprofile\fP \fIString\fP
+.br
+ \fB--config\fP \fIString\fP
+.br
+ \fB-d\fP|\fB--debug\fP
+.br
+ \fB--devices\fP \fIPV\fP
+.br
+ \fB--devicesfile\fP \fIString\fP
+.br
+ \fB--driverloaded\fP \fBy\fP|\fBn\fP
+.br
+ \fB-e\fP|\fB--exported\fP
+.br
+ \fB-h\fP|\fB--help\fP
+.br
+ \fB--ignorelockingfailure\fP
+.br
+ \fB--journal\fP \fIString\fP
+.br
+ \fB--listlvs\fP
+.br
+ \fB--listvg\fP
+.br
+ \fB--lockopt\fP \fIString\fP
+.br
+ \fB--longhelp\fP
+.br
+ \fB-j\fP|\fB--major\fP \fINumber\fP
+.br
+ \fB--minor\fP \fINumber\fP
+.br
+ \fB--nolocking\fP
+.br
+ \fB--noudevsync\fP
+.br
+ \fB-n\fP|\fB--novolumegroup\fP
+.br
+ \fB--profile\fP \fIString\fP
+.br
+ \fB-q\fP|\fB--quiet\fP
+.br
+ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP
+.br
+ \fB-s\fP|\fB--short\fP
+.br
+ \fB-t\fP|\fB--test\fP
+.br
+ \fB--udevoutput\fP
+.br
+ \fB-u\fP|\fB--uuid\fP
+.br
+ \fB-v\fP|\fB--verbose\fP
+.br
+ \fB--version\fP
+.br
+ \fB--vgonline\fP
+.br
+ \fB-y\fP|\fB--yes\fP
+.ad b
.
.SH DESCRIPTION
.
@@ -92,21 +160,29 @@ Display PV information.
.br
[ \fB-u\fP|\fB--uuid\fP ]
.br
+[ \fB--ignorelockingfailure\fP ]
+.br
+[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
+.br
[ COMMON_OPTIONS ]
.ad b
.RE
.P
-Autoactivate a VG when all PVs are online.
+\(em
+.P
+Record that a PV is online or offline.
.br
.P
\fBpvscan\fP \fB--cache\fP
.br
.RS 4
.ad l
-[ \fB-a\fP|\fB--activate\fP \fBay\fP ]
-.br
[ \fB-j\fP|\fB--major\fP \fINumber\fP ]
.br
+[ \fB--ignorelockingfailure\fP ]
+.br
+[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
+.br
[ \fB--minor\fP \fINumber\fP ]
.br
[ \fB--noudevsync\fP ]
@@ -118,16 +194,100 @@ Autoactivate a VG when all PVs are online.
[ \fIString\fP|\fIPV\fP ... ]
.RE
.P
-Common options for command:
-.
+\(em
+.P
+Record that a PV is online and autoactivate the VG if complete.
+.br
+.P
+\fBpvscan\fP \fB--cache\fP \fB-a\fP|\fB--activate\fP \fBay\fP
+.br
.RS 4
.ad l
+[ \fB-j\fP|\fB--major\fP \fINumber\fP ]
+.br
[ \fB--ignorelockingfailure\fP ]
.br
[ \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
+.br
+[ \fB--minor\fP \fINumber\fP ]
+.br
+[ \fB--noudevsync\fP ]
+.br
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.RS 4
+[ \fIString\fP|\fIPV\fP ... ]
+.RE
+.P
+\(em
+.P
+Record that a PV is online and list the VG using the PV.
+.br
+.P
+\fBpvscan\fP \fB--cache\fP \fB--listvg\fP \fIPV\fP
+.br
+.RS 4
+.ad l
+[ \fB--ignorelockingfailure\fP ]
+.br
+[ \fB--checkcomplete\fP ]
+.br
+[ \fB--vgonline\fP ]
+.br
+[ \fB--udevoutput\fP ]
+.br
+[ COMMON_OPTIONS ]
.ad b
.RE
.P
+\(em
+.P
+Record that a PV is online and list LVs using the PV.
+.br
+.P
+\fBpvscan\fP \fB--cache\fP \fB--listlvs\fP \fIPV\fP
+.br
+.RS 4
+.ad l
+[ \fB--ignorelockingfailure\fP ]
+.br
+[ \fB--checkcomplete\fP ]
+.br
+[ \fB--vgonline\fP ]
+.br
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.P
+\(em
+.P
+List LVs using the PV.
+.br
+.P
+\fBpvscan\fP \fB--listlvs\fP \fIPV\fP
+.br
+.RS 4
+.ad l
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.P
+\(em
+.P
+List the VG using the PV.
+.br
+.P
+\fBpvscan\fP \fB--listvg\fP \fIPV\fP
+.br
+.RS 4
+.ad l
+[ COMMON_OPTIONS ]
+.ad b
+.RE
+.P
+\(em
+.P
Common options for lvm:
.
.RS 4
@@ -154,6 +314,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -181,6 +343,15 @@ Auto-activate LVs in a VG when the PVs scanned have completed the VG.
Scan one or more devices and record that they are online.
.
.HP
+\fB--checkcomplete\fP
+.br
+Check if all the devices used by a VG or LV are present,
+and print "complete" or "incomplete" for each listed
+VG or LV. This option is used as a part of event-based
+autoactivation, so pvscan will do nothing if this option
+is set and event_activation=0 in the config settings.
+.
+.HP
\fB--commandprofile\fP \fIString\fP
.br
The command profile to use for command configuration.
@@ -239,6 +410,26 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
+\fB--listlvs\fP
+.br
+Print a list of LVs that use the device.
+.
+.HP
+\fB--listvg\fP
+.br
+Print the VG that uses the device.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
@@ -314,6 +505,11 @@ error messages in multi-stage operations if a tool relies on reading
back metadata it believes has changed but hasn't.
.
.HP
+\fB--udevoutput\fP
+.br
+Command output is modified to be imported from a udev rule.
+.
+.HP
\fB-u\fP|\fB--uuid\fP
.br
Show UUIDs in addition to device names.
@@ -330,6 +526,12 @@ of messages sent to stdout and stderr.
Display version information.
.
.HP
+\fB--vgonline\fP
+.br
+The first command to see a complete VG will report it uniquely.
+Other commands to see the complete VG will report it differently.
+.
+.HP
\fB-y\fP|\fB--yes\fP
.br
Do not prompt for confirmation interactively but always assume the
diff --git a/man/vgcfgbackup.8_pregen b/man/vgcfgbackup.8_pregen
index ce7102595..34690efba 100644
--- a/man/vgcfgbackup.8_pregen
+++ b/man/vgcfgbackup.8_pregen
@@ -81,6 +81,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -163,6 +165,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgcfgrestore.8_pregen b/man/vgcfgrestore.8_pregen
index 841626728..54f1d45dd 100644
--- a/man/vgcfgrestore.8_pregen
+++ b/man/vgcfgrestore.8_pregen
@@ -31,6 +31,8 @@ vgcfgrestore \(em Restore volume group configuration
\fB--force\fP
.br
\fB-h\fP|\fB--help\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB-l\fP|\fB--list\fP
.br
@@ -162,6 +164,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -240,6 +244,16 @@ thin pool kernel metadata precisely.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB-l\fP|\fB--list\fP
.br
List metadata backup and archive files pertaining to the VG.
diff --git a/man/vgchange.8_pregen b/man/vgchange.8_pregen
index 31fc458da..c2324d337 100644
--- a/man/vgchange.8_pregen
+++ b/man/vgchange.8_pregen
@@ -52,6 +52,8 @@ vgchange \(em Change volume group attributes
\fB--ignorelockingfailure\fP
.br
\fB--ignoremonitoring\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -419,6 +421,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -597,6 +601,16 @@ Do not interact with dmeventd unless --monitor is specified.
Do not use this if dmeventd is already monitoring a device.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgck.8_pregen b/man/vgck.8_pregen
index ae312424a..6295e4451 100644
--- a/man/vgck.8_pregen
+++ b/man/vgck.8_pregen
@@ -72,6 +72,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -135,6 +137,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgconvert.8_pregen b/man/vgconvert.8_pregen
index d18e7af08..2665fe6e0 100644
--- a/man/vgconvert.8_pregen
+++ b/man/vgconvert.8_pregen
@@ -67,6 +67,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -151,6 +153,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--labelsector\fP \fINumber\fP
.br
By default the PV is labelled with an LVM2 identifier in its second
diff --git a/man/vgcreate.8_pregen b/man/vgcreate.8_pregen
index 7e357a548..a77457594 100644
--- a/man/vgcreate.8_pregen
+++ b/man/vgcreate.8_pregen
@@ -107,6 +107,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -233,6 +235,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--labelsector\fP \fINumber\fP
.br
By default the PV is labelled with an LVM2 identifier in its second
diff --git a/man/vgdisplay.8_pregen b/man/vgdisplay.8_pregen
index 467f74506..4f7ddf517 100644
--- a/man/vgdisplay.8_pregen
+++ b/man/vgdisplay.8_pregen
@@ -105,6 +105,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -215,6 +217,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgexport.8_pregen b/man/vgexport.8_pregen
index 0e6e0b164..5c39c8d53 100644
--- a/man/vgexport.8_pregen
+++ b/man/vgexport.8_pregen
@@ -93,6 +93,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -160,6 +162,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgextend.8_pregen b/man/vgextend.8_pregen
index e5e01c4c5..b0d20f6eb 100644
--- a/man/vgextend.8_pregen
+++ b/man/vgextend.8_pregen
@@ -85,6 +85,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -174,6 +176,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--labelsector\fP \fINumber\fP
.br
By default the PV is labelled with an LVM2 identifier in its second
diff --git a/man/vgimport.8_pregen b/man/vgimport.8_pregen
index c0b815b65..ff242cf96 100644
--- a/man/vgimport.8_pregen
+++ b/man/vgimport.8_pregen
@@ -81,6 +81,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -155,6 +157,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgimportclone.8_pregen b/man/vgimportclone.8_pregen
index ee9bbe66c..e78d1b2c9 100644
--- a/man/vgimportclone.8_pregen
+++ b/man/vgimportclone.8_pregen
@@ -62,6 +62,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -145,6 +147,16 @@ will not be changed (nor will their associated PVs).
Add devices to the devices file.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgimportdevices.8_pregen b/man/vgimportdevices.8_pregen
index 364ef52a4..db6b597db 100644
--- a/man/vgimportdevices.8_pregen
+++ b/man/vgimportdevices.8_pregen
@@ -86,6 +86,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -159,6 +161,16 @@ See \fBlvmsystemid\fP(7) for more information about foreign VGs.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgmerge.8_pregen b/man/vgmerge.8_pregen
index e2292182a..588d2ec5d 100644
--- a/man/vgmerge.8_pregen
+++ b/man/vgmerge.8_pregen
@@ -59,6 +59,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -128,6 +130,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB-l\fP|\fB--list\fP
.br
Display merged destination VG like vgdisplay -v.
diff --git a/man/vgmknodes.8_pregen b/man/vgmknodes.8_pregen
index 10f235949..df405289d 100644
--- a/man/vgmknodes.8_pregen
+++ b/man/vgmknodes.8_pregen
@@ -66,6 +66,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -135,6 +137,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgreduce.8_pregen b/man/vgreduce.8_pregen
index 1509e4bd0..0fd4c5e73 100644
--- a/man/vgreduce.8_pregen
+++ b/man/vgreduce.8_pregen
@@ -31,6 +31,8 @@ vgreduce \(em Remove physical volume(s) from a volume group
\fB-f\fP|\fB--force\fP
.br
\fB-h\fP|\fB--help\fP
+.br
+ \fB--journal\fP \fIString\fP
.br
\fB--lockopt\fP \fIString\fP
.br
@@ -142,6 +144,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -222,6 +226,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgremove.8_pregen b/man/vgremove.8_pregen
index cf5c48ce4..e4b5a0268 100644
--- a/man/vgremove.8_pregen
+++ b/man/vgremove.8_pregen
@@ -67,6 +67,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -136,6 +138,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgrename.8_pregen b/man/vgrename.8_pregen
index 24ff24744..f09bfd507 100644
--- a/man/vgrename.8_pregen
+++ b/man/vgrename.8_pregen
@@ -85,6 +85,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -160,6 +162,16 @@ Use with extreme caution.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgs.8_pregen b/man/vgs.8_pregen
index ffb4ddc41..817bea5c1 100644
--- a/man/vgs.8_pregen
+++ b/man/vgs.8_pregen
@@ -102,6 +102,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -199,6 +201,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgscan.8_pregen b/man/vgscan.8_pregen
index 959e16190..86b7bc6ef 100644
--- a/man/vgscan.8_pregen
+++ b/man/vgscan.8_pregen
@@ -59,6 +59,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -128,6 +130,16 @@ Allows a command to continue with read-only metadata
operations after locking failures.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
diff --git a/man/vgsplit.8_pregen b/man/vgsplit.8_pregen
index 8a0ae597e..c32fc57bf 100644
--- a/man/vgsplit.8_pregen
+++ b/man/vgsplit.8_pregen
@@ -102,6 +102,8 @@ Common options for lvm:
.br
[ \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.br
+[ \fB--journal\fP \fIString\fP ]
+.br
[ \fB--lockopt\fP \fIString\fP ]
.br
[ \fB--longhelp\fP ]
@@ -196,6 +198,16 @@ For testing and debugging.
Display help text.
.
.HP
+\fB--journal\fP \fIString\fP
+.br
+Record information in the systemd journal.
+This information is in addition to information
+enabled by the lvm.conf log/journal setting.
+command: record information about the command.
+output: record the default command output.
+debug: record full command debugging.
+.
+.HP
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
next reply other threads:[~2021-08-06 12:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-06 12:03 Marian Csontos [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-03-22 15:39 dev-next - make: generate David Teigland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806120323.90CD4383D80F@sourceware.org \
--to=mcsontos@sourceware.org \
--cc=lvm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.