From: Mark Brown <broonie@kernel.org>
To: Vladimir Oltean <vladimir.oltean@nxp.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: UNGLinuxDriver@microchip.com,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, Mark Brown <broonie@kernel.org>
Subject: [PATCH] net: mscc: Fix non-GPL export of regmap APIs
Date: Tue, 10 Aug 2021 13:37:48 +0100 [thread overview]
Message-ID: <20210810123748.47871-1-broonie@kernel.org> (raw)
The ocelot driver makes use of regmap, wrapping it with driver specific
operations that are thin wrappers around the core regmap APIs. These are
exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap
exports which is frowned upon. Add _GPL suffixes to at least the APIs that
are doing register I/O.
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/net/ethernet/mscc/ocelot_io.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot_io.c b/drivers/net/ethernet/mscc/ocelot_io.c
index ea4e83410fe4..7390fa3980ec 100644
--- a/drivers/net/ethernet/mscc/ocelot_io.c
+++ b/drivers/net/ethernet/mscc/ocelot_io.c
@@ -21,7 +21,7 @@ u32 __ocelot_read_ix(struct ocelot *ocelot, u32 reg, u32 offset)
ocelot->map[target][reg & REG_MASK] + offset, &val);
return val;
}
-EXPORT_SYMBOL(__ocelot_read_ix);
+EXPORT_SYMBOL_GPL(__ocelot_read_ix);
void __ocelot_write_ix(struct ocelot *ocelot, u32 val, u32 reg, u32 offset)
{
@@ -32,7 +32,7 @@ void __ocelot_write_ix(struct ocelot *ocelot, u32 val, u32 reg, u32 offset)
regmap_write(ocelot->targets[target],
ocelot->map[target][reg & REG_MASK] + offset, val);
}
-EXPORT_SYMBOL(__ocelot_write_ix);
+EXPORT_SYMBOL_GPL(__ocelot_write_ix);
void __ocelot_rmw_ix(struct ocelot *ocelot, u32 val, u32 mask, u32 reg,
u32 offset)
@@ -45,7 +45,7 @@ void __ocelot_rmw_ix(struct ocelot *ocelot, u32 val, u32 mask, u32 reg,
ocelot->map[target][reg & REG_MASK] + offset,
mask, val);
}
-EXPORT_SYMBOL(__ocelot_rmw_ix);
+EXPORT_SYMBOL_GPL(__ocelot_rmw_ix);
u32 ocelot_port_readl(struct ocelot_port *port, u32 reg)
{
@@ -58,7 +58,7 @@ u32 ocelot_port_readl(struct ocelot_port *port, u32 reg)
regmap_read(port->target, ocelot->map[target][reg & REG_MASK], &val);
return val;
}
-EXPORT_SYMBOL(ocelot_port_readl);
+EXPORT_SYMBOL_GPL(ocelot_port_readl);
void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg)
{
@@ -69,7 +69,7 @@ void ocelot_port_writel(struct ocelot_port *port, u32 val, u32 reg)
regmap_write(port->target, ocelot->map[target][reg & REG_MASK], val);
}
-EXPORT_SYMBOL(ocelot_port_writel);
+EXPORT_SYMBOL_GPL(ocelot_port_writel);
void ocelot_port_rmwl(struct ocelot_port *port, u32 val, u32 mask, u32 reg)
{
@@ -77,7 +77,7 @@ void ocelot_port_rmwl(struct ocelot_port *port, u32 val, u32 mask, u32 reg)
ocelot_port_writel(port, (cur & (~mask)) | val, reg);
}
-EXPORT_SYMBOL(ocelot_port_rmwl);
+EXPORT_SYMBOL_GPL(ocelot_port_rmwl);
u32 __ocelot_target_read_ix(struct ocelot *ocelot, enum ocelot_target target,
u32 reg, u32 offset)
@@ -128,7 +128,7 @@ int ocelot_regfields_init(struct ocelot *ocelot,
return 0;
}
-EXPORT_SYMBOL(ocelot_regfields_init);
+EXPORT_SYMBOL_GPL(ocelot_regfields_init);
static struct regmap_config ocelot_regmap_config = {
.reg_bits = 32,
@@ -148,4 +148,4 @@ struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res)
return devm_regmap_init_mmio(ocelot->dev, regs, &ocelot_regmap_config);
}
-EXPORT_SYMBOL(ocelot_regmap_init);
+EXPORT_SYMBOL_GPL(ocelot_regmap_init);
--
2.20.1
next reply other threads:[~2021-08-10 12:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-10 12:37 Mark Brown [this message]
2021-08-10 12:49 ` [PATCH] net: mscc: Fix non-GPL export of regmap APIs Alexandre Belloni
2021-08-10 12:55 ` Vladimir Oltean
2021-08-10 14:34 ` Mark Brown
2021-08-11 22:00 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210810123748.47871-1-broonie@kernel.org \
--to=broonie@kernel.org \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.