All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: Eddie James <eajames@linux.ibm.com>
Subject: [PATCH linux dev-5.10 00/14] Rainier and Everest system fixes
Date: Wed, 11 Aug 2021 10:42:18 -0500	[thread overview]
Message-ID: <20210811154232.12649-1-eajames@linux.ibm.com> (raw)

This is a series of patches that fixes up Rainier and Everest systems.
Some of them are considered workarounds, and are not ready for upstream
linux. Others are simply support for older system hardware that doesn't
need to go to the mainline tree.

Andrew Geissler (1):
  fsi: run clock at 100MHz

Andrew Jeffery (6):
  i2c: Allow throttling of transfers to client devices
  pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour
  ucd9000: Add a throttle delay attribute in debugfs
  pmbus: (core) Add a one-shot retry in pmbus_set_page()
  pmbus: (max31785) Add a local pmbus_set_page() implementation
  pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG

Eddie James (7):
  ARM: dts: aspeed: Rainier: Add fan controller properties
  ARM: dts: aspeed: Everest: Add fan controller properties
  ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties
  ARM: dts: aspeed: Add Rainier 2U and 4U device trees for pass 1
    hardware
  fsi: sbefifo: Increase command timeouts to 30 seconds
  fsi: occ: Add dynamic debug to dump command and response
  fsi: sbefifo: Use interruptible mutex locking

 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts  |  28 +++
 .../boot/dts/aspeed-bmc-ibm-rainier-4u-p1.dts |  94 ++++++++++
 .../boot/dts/aspeed-bmc-ibm-rainier-4u.dts    |  24 +++
 .../boot/dts/aspeed-bmc-ibm-rainier-p1.dts    |  94 ++++++++++
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts  |  42 +++++
 drivers/fsi/fsi-master-aspeed.c               |   3 +-
 drivers/fsi/fsi-occ.c                         |  44 +++++
 drivers/fsi/fsi-sbefifo.c                     |  18 +-
 drivers/hwmon/pmbus/max31785.c                |  55 ++++--
 drivers/hwmon/pmbus/pmbus_core.c              |  31 ++--
 drivers/hwmon/pmbus/ucd9000.c                 |  39 ++++
 drivers/i2c/i2c-core-base.c                   |   8 +-
 drivers/i2c/i2c-core-smbus.c                  | 169 +++++++++++++++---
 drivers/i2c/i2c-core.h                        |  21 +++
 include/linux/i2c.h                           |   5 +
 16 files changed, 618 insertions(+), 59 deletions(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u-p1.dts
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier-p1.dts

-- 
2.27.0


             reply	other threads:[~2021-08-11 15:43 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-11 15:42 Eddie James [this message]
2021-08-11 15:42 ` [PATCH linux dev-5.10 01/14] i2c: Allow throttling of transfers to client devices Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 02/14] pmbus: (ucd9000) Throttle SMBus transfers to avoid poor behaviour Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 03/14] ucd9000: Add a throttle delay attribute in debugfs Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 04/14] fsi: run clock at 100MHz Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 05/14] pmbus: (core) Add a one-shot retry in pmbus_set_page() Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 06/14] pmbus: (max31785) Add a local pmbus_set_page() implementation Eddie James
2021-08-11 16:13   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 07/14] pmbus: (max31785) Retry enabling fans after writing MFR_FAN_CONFIG Eddie James
2021-08-11 16:14   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 08/14] ARM: dts: aspeed: Rainier: Add fan controller properties Eddie James
2021-08-11 16:14   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 09/14] ARM: dts: aspeed: Everest: " Eddie James
2021-08-11 16:15   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 10/14] ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties Eddie James
2021-08-11 16:17   ` Matthew Barth
2021-08-11 15:42 ` [PATCH linux dev-5.10 11/14] ARM: dts: aspeed: Add Rainier 2U and 4U device trees for pass 1 hardware Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 12/14] fsi: sbefifo: Increase command timeouts to 30 seconds Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 13/14] fsi: occ: Add dynamic debug to dump command and response Eddie James
2021-08-11 15:42 ` [PATCH linux dev-5.10 14/14] fsi: sbefifo: Use interruptible mutex locking Eddie James

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210811154232.12649-1-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.