From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
martin@kaiser.cx, fmdefrancesco@gmail.com,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 1/2] staging: r8188eu: remove if_ether.h header file
Date: Tue, 24 Aug 2021 01:48:57 +0200 [thread overview]
Message-ID: <20210823234858.2633-2-straube.linux@gmail.com> (raw)
In-Reply-To: <20210823234858.2633-1-straube.linux@gmail.com>
All constants, declarations and macros in if_ether.h are either
duplicated from <uapi/linux/if_ether.h> or unused. Remove the file
if_ether.h and its includes.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/core/rtw_recv.c | 1 -
drivers/staging/r8188eu/hal/rtl8188eu_recv.c | 1 -
drivers/staging/r8188eu/include/if_ether.h | 94 --------------------
drivers/staging/r8188eu/os_dep/xmit_linux.c | 1 -
4 files changed, 97 deletions(-)
delete mode 100644 drivers/staging/r8188eu/include/if_ether.h
diff --git a/drivers/staging/r8188eu/core/rtw_recv.c b/drivers/staging/r8188eu/core/rtw_recv.c
index 52236bae8693..08066c9587f9 100644
--- a/drivers/staging/r8188eu/core/rtw_recv.c
+++ b/drivers/staging/r8188eu/core/rtw_recv.c
@@ -8,7 +8,6 @@
#include "../include/recv_osdep.h"
#include "../include/mlme_osdep.h"
#include "../include/ip.h"
-#include "../include/if_ether.h"
#include "../include/ethernet.h"
#include "../include/usb_ops.h"
#include "../include/wifi.h"
diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
index a44c9598186c..3a2c7090cd7b 100644
--- a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
+++ b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
@@ -7,7 +7,6 @@
#include "../include/recv_osdep.h"
#include "../include/mlme_osdep.h"
#include "../include/ip.h"
-#include "../include/if_ether.h"
#include "../include/ethernet.h"
#include "../include/usb_ops.h"
diff --git a/drivers/staging/r8188eu/include/if_ether.h b/drivers/staging/r8188eu/include/if_ether.h
deleted file mode 100644
index 5bb79fddeec6..000000000000
--- a/drivers/staging/r8188eu/include/if_ether.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
-/* Copyright(c) 2007 - 2011 Realtek Corporation. */
-
-#ifndef _LINUX_IF_ETHER_H
-#define _LINUX_IF_ETHER_H
-
-/*
- * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
- * and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN 6 /* Octets in one ethernet addr */
-#define ETH_HLEN 14 /* Total octets in header. */
-#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN 1500 /* Max. octets in payload */
-#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
-
-/*
- * These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
-#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
-#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
-#define ETH_P_IP 0x0800 /* Internet Protocol packet */
-#define ETH_P_X25 0x0805 /* CCITT X.25 */
-#define ETH_P_ARP 0x0806 /* Address Resolution packet */
-#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet */
-#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP */
-#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
-#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
-#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
-#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
-#define ETH_P_LAT 0x6004 /* DEC LAT */
-#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
-#define ETH_P_CUST 0x6006 /* DEC Customer use */
-#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
-#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
-#define ETH_P_ATALK 0x809B /* Appletalk DDP */
-#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
-#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
-#define ETH_P_IPX 0x8137 /* IPX over DIX */
-#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
-#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
-#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
-#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
-#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
- * over Ethernet
- */
-
-/*
- * Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
-#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
-#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
-#define ETH_P_802_2 0x0004 /* 802.2 frames */
-#define ETH_P_SNAP 0x0005 /* Internal only */
-#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
-#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
-#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
-#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
-#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
-#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
-#define ETH_P_ECONET 0x0018 /* Acorn Econet */
-
-/*
- * This is an Ethernet frame header.
- */
-
-struct ethhdr {
- unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
- unsigned char h_source[ETH_ALEN]; /* source ether addr */
- unsigned short h_proto; /* packet type ID field */
-};
-
-struct _vlan {
- unsigned short h_vlan_TCI; /* Encap prio and VLAN ID */
- unsigned short h_vlan_encapsulated_proto;
-};
-
-#define get_vlan_id(pvlan) \
- ((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
-#define get_vlan_priority(pvlan) \
- ((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
-#define get_vlan_encap_proto(pvlan) \
- (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
-
-#endif /* _LINUX_IF_ETHER_H */
diff --git a/drivers/staging/r8188eu/os_dep/xmit_linux.c b/drivers/staging/r8188eu/os_dep/xmit_linux.c
index 60e0eea7ad84..d35e92c17a5e 100644
--- a/drivers/staging/r8188eu/os_dep/xmit_linux.c
+++ b/drivers/staging/r8188eu/os_dep/xmit_linux.c
@@ -5,7 +5,6 @@
#include "../include/osdep_service.h"
#include "../include/drv_types.h"
-#include "../include/if_ether.h"
#include "../include/ip.h"
#include "../include/wifi.h"
#include "../include/mlme_osdep.h"
--
2.32.0
next prev parent reply other threads:[~2021-08-23 23:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-23 23:48 [PATCH 0/2] staging: r8188eu: remove unneeded header files Michael Straube
2021-08-23 23:48 ` Michael Straube [this message]
2021-08-23 23:48 ` [PATCH 2/2] staging: r8188eu: remove ip.h header file Michael Straube
2021-08-24 0:17 ` [PATCH 0/2] staging: r8188eu: remove unneeded header files Phillip Potter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210823234858.2633-2-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=fmdefrancesco@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=martin@kaiser.cx \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.