Re: [PATCH rdma-next 00/10] Optional counter statistics support

[Jason Gunthorpe <jgg@nvidia.com>]

On Tue, Aug 24, 2021 at 09:44:26AM +0800, Mark Zhang wrote:
> On 8/24/2021 3:33 AM, Jason Gunthorpe wrote:
> > On Wed, Aug 18, 2021 at 02:24:18PM +0300, Mark Zhang wrote:
> > > Hi,
> > > 
> > > This series from Aharon and Neta provides an extension to the rdma
> > > statistics tool that allows to add and remove optional counters
> > > dynamically, using new netlink commands.
> > > 
> > > The idea of having optional counters is to provide to the users the
> > > ability to get statistics of counters that hurts performance.
> > > 
> > > Once an optional counter was added, its statistics will be presented
> > > along with all the counters, using the show command.
> > > 
> > > Binding objects to the optional counters is currently not supported,
> > > neither in auto mode nor in manual mode.
> > > 
> > > To get the list of optional counters that are supported on this device,
> > > use "rdma statistic mode supported". To see which counters are currently
> > > enabled, use "rdma statistic mode".
> > > 
> > > $ rdma statistic mode supported
> > > link rocep8s0f0/1
> > >      Optional-set: cc_rx_ce_pkts cc_rx_cnp_pkts cc_tx_cnp_pkts
> > > link rocep8s0f1/1
> > >      Optional-set: cc_rx_ce_pkts cc_rx_cnp_pkts cc_tx_cnp_pkts
> > > 
> > > $ sudo rdma statistic add link rocep8s0f0/1 optional-set cc_rx_ce_pkts
> > > $ rdma statistic mode
> > > link rocep8s0f0/1
> > >      Optional-set: cc_rx_ce_pkts
> > > $ sudo rdma statistic add link rocep8s0f0/1 optional-set cc_tx_cnp_pkts
> > > $ rdma statistic mode
> > > link rocep8s0f0/1
> > >      Optional-set: cc_rx_ce_pkts cc_tx_cnp_pkts
> > 
> > This doesn't look like the right output to iproute to me, the two
> > command should not be using the same tag and the output of iproute
> > should always be formed to be valid input to iproute
> 
> So it should be like this:
> 
> $ rdma statistic mode supported
> link rocep8s0f0/1 optional-set cc_rx_ce_pkts cc_rx_cnp_pkts  cc_tx_cnp_pkts
> link rocep8s0f1/1 optional-set cc_rx_ce_pkts cc_rx_cnp_pkts cc_tx_cnp_pkts

Each netlink tag in the protocol should have a unique string in the
output. So you need strings that mean "optional set supported" and
"optional set currently enabled"

Jason