All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
	martin@kaiser.cx, fmdefrancesco@gmail.com,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
	Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 2/2] staging: r8188eu: remove commented constants from wifi.h
Date: Sun, 29 Aug 2021 20:07:17 +0200	[thread overview]
Message-ID: <20210829180717.15393-2-straube.linux@gmail.com> (raw)
In-Reply-To: <20210829180717.15393-1-straube.linux@gmail.com>

Remove commented constants from wifi.h.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
 drivers/staging/r8188eu/include/wifi.h | 50 --------------------------
 1 file changed, 50 deletions(-)

diff --git a/drivers/staging/r8188eu/include/wifi.h b/drivers/staging/r8188eu/include/wifi.h
index eb07ac9b8943..193a557f0f47 100644
--- a/drivers/staging/r8188eu/include/wifi.h
+++ b/drivers/staging/r8188eu/include/wifi.h
@@ -114,33 +114,6 @@ enum WIFI_REASON_CODE	{
 	_RSON_TDLS_TEAR_UN_RSN_		= 26,
 };
 
-/* Reason codes (IEEE 802.11-2007, 7.3.1.7, Table 7-22)
-
-#define WLAN_REASON_UNSPECIFIED 1
-#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
-#define WLAN_REASON_DEAUTH_LEAVING 3
-#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
-#define WLAN_REASON_DISASSOC_AP_BUSY 5
-#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
-#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
-#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
-#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9 */
-/* IEEE 802.11h */
-
-/* IEEE 802.11i
-#define WLAN_REASON_INVALID_IE 13
-#define WLAN_REASON_MICHAEL_MIC_FAILURE 14
-#define WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT 15
-#define WLAN_REASON_GROUP_KEY_UPDATE_TIMEOUT 16
-#define WLAN_REASON_IE_IN_4WAY_DIFFERS 17
-#define WLAN_REASON_GROUP_CIPHER_NOT_VALID 18
-#define WLAN_REASON_PAIRWISE_CIPHER_NOT_VALID 19
-#define WLAN_REASON_AKMP_NOT_VALID 20
-#define WLAN_REASON_UNSUPPORTED_RSN_IE_VERSION 21
-#define WLAN_REASON_INVALID_RSN_IE_CAPAB 22
-#define WLAN_REASON_IEEE_802_1X_AUTH_FAILED 23
-#define WLAN_REASON_CIPHER_SUITE_REJECTED 24 */
-
 enum WIFI_STATUS_CODE {
 	_STATS_SUCCESSFUL_		= 0,
 	_STATS_FAILURE_			= 1,
@@ -155,19 +128,6 @@ enum WIFI_STATUS_CODE {
 	_STATS_RATE_FAIL_		= 18,
 };
 
-/* Status codes (IEEE 802.11-2007, 7.3.1.9, Table 7-23)
-#define WLAN_STATUS_SUCCESS 0
-#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
-#define WLAN_STATUS_CAPS_UNSUPPORTED 10
-#define WLAN_STATUS_REASSOC_NO_ASSOC 11
-#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
-#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
-#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
-#define WLAN_STATUS_CHALLENGE_FAIL 15
-#define WLAN_STATUS_AUTH_TIMEOUT 16
-#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
-#define WLAN_STATUS_ASSOC_DENIED_RATES 18 */
-
 /* entended */
 /* IEEE 802.11b */
 #define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
@@ -552,16 +512,6 @@ static inline int IsFrameTypeCtrl(unsigned char *pframe)
 #define _IEEE8021X_MGT_			1	/*  WPA */
 #define _IEEE8021X_PSK_			2	/*  WPA with pre-shared key */
 
-/*
-#define _NO_PRIVACY_			0
-#define _WEP_40_PRIVACY_		1
-#define _TKIP_PRIVACY_			2
-#define _WRAP_PRIVACY_			3
-#define _CCMP_PRIVACY_			4
-#define _WEP_104_PRIVACY_		5
-#define _WEP_WPA_MIXED_PRIVACY_ 6	WEP + WPA
-*/
-
 /*-----------------------------------------------------------------------------
 				Below is the definition for WMM
 ------------------------------------------------------------------------------*/
-- 
2.33.0


  reply	other threads:[~2021-08-29 18:07 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-29 18:07 [PATCH 1/2] staging: r8188eu: remove unused constants from wifi.h Michael Straube
2021-08-29 18:07 ` Michael Straube [this message]
2021-08-30  0:21   ` [PATCH 2/2] staging: r8188eu: remove commented " Phillip Potter
2021-08-30  0:19 ` [PATCH 1/2] staging: r8188eu: remove unused " Phillip Potter
2021-09-02  9:23 ` Greg KH
2021-09-02  9:23   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210829180717.15393-2-straube.linux@gmail.com \
    --to=straube.linux@gmail.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=fmdefrancesco@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=martin@kaiser.cx \
    --cc=phil@philpotter.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.