All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luo Jie <luoj@codeaurora.org>
To: andrew@lunn.ch, hkallweit1@gmail.com, linux@armlinux.org.uk,
	davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	sricharan@codeaurora.org, Luo Jie <luoj@codeaurora.org>
Subject: [PATCH v1 1/3] net: phy: improve the wol feature of at803x
Date: Mon, 30 Aug 2021 19:07:31 +0800	[thread overview]
Message-ID: <20210830110733.8964-2-luoj@codeaurora.org> (raw)
In-Reply-To: <20210830110733.8964-1-luoj@codeaurora.org>

wol is controlled by bit 5 of reg 3.8012, which should be
configured by set_wol of phy_driver.

Signed-off-by: Luo Jie <luoj@codeaurora.org>
---
 drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 21 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5d62b85a4024..ecae26f11aa4 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -70,10 +70,14 @@
 #define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
 #define AT803X_LED_CONTROL			0x18
 
-#define AT803X_DEVICE_ADDR			0x03
+/* WOL control */
+#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
+#define AT803X_WOL_EN				BIT(5)
+
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
 #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
 #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
+
 #define AT803X_REG_CHIP_CONFIG			0x1f
 #define AT803X_BT_BX_REG_SEL			0x8000
 
@@ -328,12 +332,6 @@ static int at803x_set_wol(struct phy_device *phydev,
 	struct net_device *ndev = phydev->attached_dev;
 	const u8 *mac;
 	int ret;
-	u32 value;
-	unsigned int i, offsets[] = {
-		AT803X_LOC_MAC_ADDR_32_47_OFFSET,
-		AT803X_LOC_MAC_ADDR_16_31_OFFSET,
-		AT803X_LOC_MAC_ADDR_0_15_OFFSET,
-	};
 
 	if (!ndev)
 		return -ENODEV;
@@ -344,23 +342,30 @@ static int at803x_set_wol(struct phy_device *phydev,
 		if (!is_valid_ether_addr(mac))
 			return -EINVAL;
 
-		for (i = 0; i < 3; i++)
-			phy_write_mmd(phydev, AT803X_DEVICE_ADDR, offsets[i],
-				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+		phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+				mac[1] | (mac[0] << 8));
+		phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+				mac[3] | (mac[2] << 8));
+		phy_write_mmd(phydev, MDIO_MMD_PCS, AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+				mac[5] | (mac[4] << 8));
 
-		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value |= AT803X_INTR_ENABLE_WOL;
-		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		/* clear the pending interrupt */
+		phy_read(phydev, AT803X_INTR_STATUS);
+
+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
 		if (ret)
 			return ret;
-		value = phy_read(phydev, AT803X_INTR_STATUS);
+
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
+				0, AT803X_WOL_EN);
+
 	} else {
-		value = phy_read(phydev, AT803X_INTR_ENABLE);
-		value &= (~AT803X_INTR_ENABLE_WOL);
-		ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
 		if (ret)
 			return ret;
-		value = phy_read(phydev, AT803X_INTR_STATUS);
+
+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
+				AT803X_WOL_EN, 0);
 	}
 
 	return ret;
@@ -369,13 +374,16 @@ static int at803x_set_wol(struct phy_device *phydev,
 static void at803x_get_wol(struct phy_device *phydev,
 			   struct ethtool_wolinfo *wol)
 {
-	u32 value;
+	int ret;
 
 	wol->supported = WAKE_MAGIC;
 	wol->wolopts = 0;
 
-	value = phy_read(phydev, AT803X_INTR_ENABLE);
-	if (value & AT803X_INTR_ENABLE_WOL)
+	ret = phy_read_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL);
+	if (ret < 0)
+		return;
+
+	if (ret & AT803X_WOL_EN)
 		wol->wolopts |= WAKE_MAGIC;
 }
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  reply	other threads:[~2021-08-30 11:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-30 11:07 [PATCH v1 0/3] net: phy: Add qca8081 ethernet phy driver Luo Jie
2021-08-30 11:07 ` Luo Jie [this message]
2021-08-30 13:32   ` [PATCH v1 1/3] net: phy: improve the wol feature of at803x Andrew Lunn
2021-08-31 14:01     ` Jie Luo
2021-08-30 11:07 ` [PATCH v1 2/3] net: phy: add qca8081 ethernet phy driver Luo Jie
2021-08-30 11:39   ` Russell King (Oracle)
2021-08-31 13:48     ` Jie Luo
2021-08-30 13:48   ` Andrew Lunn
2021-08-31 14:10     ` Jie Luo
2021-08-30 11:07 ` [PATCH v1 3/3] net: phy: add cdt feature of qca8081 phy Luo Jie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210830110733.8964-2-luoj@codeaurora.org \
    --to=luoj@codeaurora.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=sricharan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.