All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Dadap <ddadap@nvidia.com>
To: <platform-driver-x86@vger.kernel.org>
Cc: <andy.shevchenko@gmail.com>, <hdegoede@redhat.com>,
	<mario.limonciello@outlook.com>, <pobrn@protonmail.com>,
	<dvhart@infradead.org>, <thomas@t-8ch.de>,
	Daniel Dadap <ddadap@nvidia.com>,
	Aaron Plattner <aplattner@nvidia.com>
Subject: [PATCH v4] platform/x86: Add driver for ACPI WMAA EC-based backlight control
Date: Tue, 31 Aug 2021 17:49:07 -0500	[thread overview]
Message-ID: <20210831224906.1072-1-ddadap@nvidia.com> (raw)
In-Reply-To: <70b81e33-c769-4cb8-0bae-5ee10a209389@nvidia.com>

A number of upcoming notebook computer designs drive the internal
display panel's backlight PWM through the Embedded Controller (EC).
This EC-based backlight control can be plumbed through to an ACPI
"WMAA" method interface, which in turn can be wrapped by WMI with
the GUID handle 603E9613-EF25-4338-A3D0-C46177516DB7.

Add a new driver, aliased to the WMAA WMI GUID, to expose a sysfs
backlight class driver to control backlight levels on systems with
EC-driven backlights.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
---

v2: Convert to WMI subsystem driver, suggested by Mario Limonciello
     <mario.limonciello@outlook.com>; various cleanups suggested by
     Barnabás Pőcze <pobrn@protonmail.com>
v3: Address assorted style nits raised by Andy Shevchenko
     <andy.shevchenko@gmail.com> in response to a related patch; remove
     additional behavior change to WMI subsystem from patch series as
     recommended by Hans de Goede <hdegoede@redhat.com> 
v4: Use MODULE_DEVICE_TABLE() (Thomas Weißschuh <thomas@t-8ch.de>)
    Fix scope of internal driver state; various style fixes (Barnabás
    Pőcze, Andy Shevchenko)
    Use devm_backlight_device_register() (Barnabás Pőcze)
    Add kerneldoc comments for enums and structs (Andy Shevchenko)

 MAINTAINERS                               |   6 +
 drivers/platform/x86/Kconfig              |  16 ++
 drivers/platform/x86/Makefile             |   1 +
 drivers/platform/x86/wmaa-backlight-wmi.c | 185 ++++++++++++++++++++++
 4 files changed, 208 insertions(+)
 create mode 100644 drivers/platform/x86/wmaa-backlight-wmi.c

diff --git a/MAINTAINERS b/MAINTAINERS
index bbaecde94aa0..fd7362a86c6d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20008,6 +20008,12 @@ L:	linux-wireless@vger.kernel.org
 S:	Odd fixes
 F:	drivers/net/wireless/wl3501*
 
+WMAA BACKLIGHT DRIVER
+M:	Daniel Dadap <ddadap@nvidia.com>
+L:	platform-driver-x86@vger.kernel.org
+S:	Supported
+F:	drivers/platform/x86/wmaa-backlight-wmi.c
+
 WOLFSON MICROELECTRONICS DRIVERS
 L:	patches@opensource.cirrus.com
 S:	Supported
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index d12db6c316ea..0df908ef8d7c 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -113,6 +113,22 @@ config PEAQ_WMI
 	help
 	 Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s.
 
+config WMAA_BACKLIGHT_WMI
+	tristate "ACPI WMAA Backlight Driver"
+	depends on ACPI_WMI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  This driver provides a sysfs backlight interface for notebook
+	  systems which expose the WMAA ACPI method and an associated WMI
+	  wrapper to drive LCD backlight levels through the system's
+	  Embedded Controller (EC).
+
+	  Say Y or M here if you want to control the backlight on a notebook
+	  system with an EC-driven backlight using the ACPI WMAA method.
+
+	  If you choose to compile this driver as a module the module will be
+	  called wmaa-backlight-wmi.
+
 config XIAOMI_WMI
 	tristate "Xiaomi WMI key driver"
 	depends on ACPI_WMI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 7ee369aab10d..109c1714237d 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_INTEL_WMI_SBL_FW_UPDATE)	+= intel-wmi-sbl-fw-update.o
 obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
 obj-$(CONFIG_MXM_WMI)			+= mxm-wmi.o
 obj-$(CONFIG_PEAQ_WMI)			+= peaq-wmi.o
+obj-$(CONFIG_WMAA_BACKLIGHT_WMI)	+= wmaa-backlight-wmi.o
 obj-$(CONFIG_XIAOMI_WMI)		+= xiaomi-wmi.o
 obj-$(CONFIG_GIGABYTE_WMI)		+= gigabyte-wmi.o
 
diff --git a/drivers/platform/x86/wmaa-backlight-wmi.c b/drivers/platform/x86/wmaa-backlight-wmi.c
new file mode 100644
index 000000000000..cb1a973803b1
--- /dev/null
+++ b/drivers/platform/x86/wmaa-backlight-wmi.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/backlight.h>
+#include <linux/module.h>
+#include <linux/wmi.h>
+
+/**
+ * enum wmaa_method - WMI method IDs for ACPI WMAA
+ *
+ * @WMAA_LEVEL:  Get or set the brightness level,
+ *               or get the maximum brightness level.
+ * @WMAA_SOURCE: Get the source for backlight control.
+ */
+enum wmaa_method {
+	WMAA_LEVEL = 1,
+	WMAA_SOURCE = 2,
+};
+
+/**
+ * enum wmaa_get_or_set - Operation mode for ACPI WMAA method
+ *
+ * @WMAA_GET:     Get the current brightness level or backlight source.
+ * @WMAA_SET:     Set the brightness level.
+ * @WMAA_GET_MAX: Get the maximum brightness level. This is only valid when the
+ *                WMI method is %WMAA_LEVEL.
+ */
+enum wmaa_get_or_set {
+	WMAA_GET = 0,
+	WMAA_SET = 1,
+	WMAA_GET_MAX = 2
+};
+
+/**
+ * enum wmaa_source - Backlight brightness control source identification
+ *
+ * @WMAA_SOURCE_GPU:   Backlight brightness is controlled by the GPU.
+ * @WMAA_SOURCE_EC:    Backlight brightness is controlled by the system's
+ *                     Embedded Controller (EC).
+ * @WMAA_SOURCE_AUX:   Backlight brightness is controlled over the DisplayPort
+ *                     AUX channel.
+ */
+enum wmaa_source {
+	WMAA_SOURCE_GPU = 1,
+	WMAA_SOURCE_EC = 2,
+	WMAA_SOURCE_AUX = 3
+};
+
+/**
+ * struct wmaa_args - arguments for the ACPI WMAA method
+ *
+ * @set:     Pass in an &enum wmaa_get_or_set value to select between getting or
+ *           setting a value.
+ * @val:     In parameter for value to set when operating in %WMAA_SET mode. Not
+ *           used in %WMAA_GET or %WMAA_GET_MAX mode.
+ * @ret:     Out parameter returning retrieved value when operating in %WMAA_GET
+ *           or %WMAA_GET_MAX mode. Not used in %WMAA_SET mode.
+ * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct.
+ *
+ * This is the parameters structure for the ACPI WMAA method as wrapped by WMI.
+ * The value passed in to @val or returned by @ret will be a brightness value
+ * when the WMI method ID is %WMAA_LEVEL, or an &enum wmaa_source value when
+ * the WMI method ID is %WMAA_SOURCE.
+ */
+struct wmaa_args {
+	u32 set;
+	u32 val;
+	u32 ret;
+	u32 ignored[3];
+};
+
+static int wmi_call_wmaa(struct wmi_device *w, enum wmaa_method method, enum wmaa_get_or_set set, u32 *val)
+{
+	struct wmaa_args args = {
+		.set = set,
+		.val = 0,
+		.ret = 0,
+	};
+	struct acpi_buffer buf = { (acpi_size)sizeof(args), &args };
+	acpi_status status;
+
+	if (set == WMAA_SET)
+		args.val = *val;
+
+	status = wmidev_evaluate_method(w, 0, method, &buf, &buf);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&w->dev, "ACPI WMAA failed with %s\n",
+			acpi_format_exception(status));
+		return -EIO;
+	}
+
+	if (set != WMAA_SET)
+		*val = args.ret;
+
+	return 0;
+}
+
+static int wmaa_backlight_update_status(struct backlight_device *bd)
+{
+	struct wmi_device *wdev = bl_get_data(bd);
+
+	return wmi_call_wmaa(wdev, WMAA_LEVEL, WMAA_SET, &bd->props.brightness);
+}
+
+static int wmaa_backlight_get_brightness(struct backlight_device *bd)
+{
+	struct wmi_device *wdev = bl_get_data(bd);
+	u32 level = 0;
+	int ret;
+
+	ret = wmi_call_wmaa(wdev, WMAA_LEVEL, WMAA_GET, &level);
+
+	if (ret)
+		dev_err(&bd->dev, "ACPI WMAA failed to get backlight level.\n");
+
+	return level;
+}
+
+static const struct backlight_ops wmaa_backlight_ops = {
+	.update_status = wmaa_backlight_update_status,
+	.get_brightness = wmaa_backlight_get_brightness
+};
+
+static int wmaa_backlight_wmi_probe(struct wmi_device *w, const void *ctx)
+{
+	struct backlight_properties props = {};
+	struct backlight_device *backlight;
+	u32 source;
+	int ret;
+
+	ret = wmi_call_wmaa(w, WMAA_SOURCE, WMAA_GET, &source);
+	if (ret)
+		return ret;
+
+	if (source != WMAA_SOURCE_EC) {
+		/* This driver is only to be used when brightness control is
+		 * handled by the EC; otherwise, the GPU driver(s) should handle
+		 * brightness control. */
+		return -ENODEV;
+	}
+
+	/* Identify this backlight device as a platform device so that it can
+	 * be prioritized over any exposed GPU-driven raw device(s). */
+	props.type = BACKLIGHT_PLATFORM;
+
+	ret = wmi_call_wmaa(w, WMAA_LEVEL, WMAA_GET_MAX, &props.max_brightness);
+	if (ret)
+		return ret;
+
+	ret = wmi_call_wmaa(w, WMAA_LEVEL, WMAA_GET, &props.brightness);
+	if (ret)
+		return ret;
+
+	backlight = devm_backlight_device_register(
+		&w->dev, "wmaa_backlight",
+		&w->dev, w, &wmaa_backlight_ops, &props);
+	if (IS_ERR(backlight))
+		return PTR_ERR(backlight);
+
+	return 0;
+}
+
+#define WMAA_WMI_GUID "603E9613-EF25-4338-A3D0-C46177516DB7"
+
+static const struct wmi_device_id wmaa_backlight_wmi_id_table[] = {
+	{ .guid_string = WMAA_WMI_GUID },
+	{ }
+};
+MODULE_DEVICE_TABLE(wmi, wmaa_backlight_wmi_id_table);
+
+static struct wmi_driver wmaa_backlight_wmi_driver = {
+	.driver = {
+		.name = "wmaa-backlight"
+	},
+	.probe = wmaa_backlight_wmi_probe,
+	.id_table = wmaa_backlight_wmi_id_table
+};
+module_wmi_driver(wmaa_backlight_wmi_driver);
+
+MODULE_AUTHOR("Aaron Plattner <aplattner@nvidia.com>");
+MODULE_AUTHOR("Daniel Dadap <ddadap@nvidia.com>");
+MODULE_DESCRIPTION("WMAA Backlight WMI driver");
+MODULE_LICENSE("GPL v2");
-- 
2.20.1


  reply	other threads:[~2021-08-31 23:27 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <DM6PR19MB2636AB267CD321DE40EF324AFA730@DM6PR19MB2636.namprd19.prod.outlook.com>
     [not found] ` <20200731202154.11382-1-ddadap@nvidia.com>
     [not found]   ` <20200731202154.11382-2-ddadap@nvidia.com>
2020-11-10  9:34     ` [PATCH v2 2/2] platform/x86: wmi: fail wmi_driver_register when no GUID is found Hans de Goede
2020-11-12 18:54       ` Daniel Dadap
2021-08-24 22:04       ` [PATCH v3] platform/x86: Add driver for ACPI WMAA EC-based backlight control Daniel Dadap
2021-08-24 22:47         ` Barnabás Pőcze
2021-08-25 16:36           ` Daniel Dadap
2021-08-25 22:26           ` Daniel Dadap
2021-08-27 16:47             ` Daniel Dadap
2021-08-27 17:12               ` Daniel Dadap
2021-08-25  9:05         ` Andy Shevchenko
2021-08-25 16:47           ` Daniel Dadap
2021-08-25 22:06             ` Thomas Weißschuh
2021-08-25 22:28               ` Daniel Dadap
2021-08-26 13:35             ` Andy Shevchenko
2021-08-26 15:39               ` Daniel Dadap
2021-08-31 22:49                 ` Daniel Dadap [this message]
2021-09-01  9:25                   ` [PATCH v4] " Thomas Weißschuh
2021-09-02  2:12                     ` Daniel Dadap
2021-09-02 10:19                       ` Thomas Weißschuh
2021-09-02 20:15                         ` Daniel Dadap
2021-09-02 20:31                           ` Hans de Goede
2021-09-02 21:47                             ` [PATCH v5] " Daniel Dadap
2021-09-02 23:20                               ` Thomas Weißschuh
2021-09-03  0:22                                 ` Daniel Dadap
2021-09-03  8:14                                   ` Andy Shevchenko
2021-09-03 17:55                                     ` Daniel Dadap
2021-09-03  0:38                                 ` [PATCH v6] " Daniel Dadap
2021-09-13  9:01                                   ` Hans de Goede
2021-09-20 13:29                                     ` Pali Rohár
2021-09-20 13:33                                       ` Hans de Goede
2021-09-20 13:51                                         ` Pali Rohár
2021-09-20 17:34                                           ` Daniel Dadap
2021-09-20 17:55                                             ` Pali Rohár
2021-09-20 19:38                                               ` Daniel Dadap
2021-09-20 19:52                                                 ` Pali Rohár
2021-09-21 13:53                                           ` Hans de Goede
2021-09-21 14:02                                             ` Pali Rohár
2021-09-21 14:29                                             ` Daniel Dadap
2021-09-21 14:58                                               ` Hans de Goede
2021-09-27 20:23                                                 ` [PATCH 1/2] platform/x86: Remove "WMAA" from identifier names in wmaa-backlight-wmi.c Daniel Dadap
2021-09-27 20:23                                                   ` [PATCH 2/2] platform/x86: Rename wmaa-backlight-wmi to nvidia-wmi-ec-backlight Daniel Dadap
2021-10-11 13:00                                                   ` [PATCH 1/2] platform/x86: Remove "WMAA" from identifier names in wmaa-backlight-wmi.c Hans de Goede
2021-09-27 22:52                                                 ` [PATCH v6] platform/x86: Add driver for ACPI WMAA EC-based backlight control Daniel Dadap
2021-09-02  9:28                     ` [PATCH v4] " Andy Shevchenko
2021-09-02  9:33                       ` Thomas Weißschuh
2021-09-02  9:36                         ` Andy Shevchenko
2021-09-01 15:57                   ` Andy Shevchenko
2021-09-01 23:12                     ` Aaron Plattner
2021-09-02  2:37                     ` Daniel Dadap
2021-09-02  9:35                       ` Andy Shevchenko
2021-09-02 20:15                         ` Daniel Dadap
2021-09-03  8:10                           ` Andy Shevchenko
2021-09-02 15:38                   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210831224906.1072-1-ddadap@nvidia.com \
    --to=ddadap@nvidia.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=aplattner@nvidia.com \
    --cc=dvhart@infradead.org \
    --cc=hdegoede@redhat.com \
    --cc=mario.limonciello@outlook.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=pobrn@protonmail.com \
    --cc=thomas@t-8ch.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.