From: Eddie James <eajames@linux.ibm.com>
To: openbmc@lists.ozlabs.org
Cc: eajames@linux.ibm.com
Subject: [PATCH linux dev-5.10 v2 1/4] ARM: dts: aspeed: everest: Add I2C bus 15 muxes
Date: Wed, 15 Sep 2021 16:47:35 -0500 [thread overview]
Message-ID: <20210915214738.34382-2-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210915214738.34382-1-eajames@linux.ibm.com>
Add the muxes that are attached on I2C bus 15.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 158 +++++++++++++++++++
1 file changed, 158 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 09fd6a3c05d9..10e214f8c7bc 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -96,6 +96,18 @@ aliases {
i2c32 = &i2c14mux1chn1;
i2c33 = &i2c14mux1chn2;
i2c34 = &i2c14mux1chn3;
+ i2c35 = &i2c15mux0chn0;
+ i2c36 = &i2c15mux0chn1;
+ i2c37 = &i2c15mux0chn2;
+ i2c38 = &i2c15mux0chn3;
+ i2c39 = &i2c15mux1chn0;
+ i2c40 = &i2c15mux1chn1;
+ i2c41 = &i2c15mux1chn2;
+ i2c42 = &i2c15mux1chn3;
+ i2c43 = &i2c15mux2chn0;
+ i2c44 = &i2c15mux2chn1;
+ i2c45 = &i2c15mux2chn2;
+ i2c46 = &i2c15mux2chn3;
serial4 = &uart5;
@@ -2845,6 +2857,152 @@ eeprom@50 {
&i2c15 {
status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ };
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux1chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux1chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux1chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux1chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+ };
+
+ i2c-switch@72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c15mux2chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux2chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c15mux2chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c15mux2chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
};
&ehci1 {
--
2.27.0
next prev parent reply other threads:[~2021-09-15 21:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-15 21:47 [PATCH linux dev-5.10 v2 0/4] ARM: dts: aspeed: p10 i2c, leds, and gpios Eddie James
2021-09-15 21:47 ` Eddie James [this message]
2021-09-15 21:47 ` [PATCH linux dev-5.10 v2 2/4] ARM: dts: aspeed: rainier: Add system LEDs Eddie James
2021-09-15 21:47 ` [PATCH linux dev-5.10 v2 3/4] ARM: dts: aspeed: rainier: Add eeprom on bus 12 Eddie James
2021-09-15 21:47 ` [PATCH linux dev-5.10 v2 4/4] ARM: dts: aspeed: Rainier: Remove gpio hog for GPIOP7 Eddie James
2021-09-16 7:20 ` Joel Stanley
2021-09-16 7:20 ` [PATCH linux dev-5.10 v2 0/4] ARM: dts: aspeed: p10 i2c, leds, and gpios Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210915214738.34382-2-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.