[RESEND PATCH 1/3] hw/intc: openpic: Correct the reset value of IPIDR for FSL chipset

[Bin Meng <bmeng.cn@gmail.com>]

The reset value of IPIDR should be zero for Freescale chipset, per
the following 2 manuals I checked:

- P2020RM (https://www.nxp.com/webapp/Download?colCode=P2020RM)
- P4080RM (https://www.nxp.com/webapp/Download?colCode=P4080RM)

Currently it is set to 1, which leaves the IPI enabled on core 0
after power-on reset. Such may cause unexpected interrupt to be
delivered to core 0 if the IPI is triggered from core 0 to other
cores later.

Fixes: ffd5e9fe0276 ("openpic: Reset IRQ source private members")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/584
Signed-off-by: Bin Meng <bin.meng@windriver.com>
---

 hw/intc/openpic.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/hw/intc/openpic.c b/hw/intc/openpic.c
index 9b4c17854d..2790c6710a 100644
--- a/hw/intc/openpic.c
+++ b/hw/intc/openpic.c
@@ -1276,6 +1276,15 @@ static void openpic_reset(DeviceState *d)
             break;
         }
 
+        /* Mask all IPI interrupts for Freescale OpenPIC */
+        if ((opp->model == OPENPIC_MODEL_FSL_MPIC_20) ||
+            (opp->model == OPENPIC_MODEL_FSL_MPIC_42)) {
+            if (i >= opp->irq_ipi0 && i < opp->irq_tim0) {
+                write_IRQreg_idr(opp, i, 0);
+                continue;
+            }
+        }
+
         write_IRQreg_idr(opp, i, opp->idr_reset);
     }
     /* Initialise IRQ destinations */
-- 
2.25.1