From: Oleksandr Andrushchenko <andr2000@gmail.com>
To: xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org
Cc: boris.ostrovsky@oracle.com, jgross@suse.com, julien@xen.org,
sstabellini@kernel.org, jbeulich@suse.com,
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>,
Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Subject: [PATCH v4 2/2] xen-pciback: allow compiling on other archs than x86
Date: Mon, 27 Sep 2021 09:58:22 +0300 [thread overview]
Message-ID: <20210927065822.350973-2-andr2000@gmail.com> (raw)
In-Reply-To: <20210927065822.350973-1-andr2000@gmail.com>
From: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Xen-pciback driver was designed to be built for x86 only. But it
can also be used by other architectures, e.g. Arm.
Re-structure the driver in a way that it can be built for other
platforms as well.
Add new configuration option CONFIG_XEN_PCIDEV_STUB, so the driver
can be limited in its functionality, e.g. no support for
para-virtualised scenario when it acts as PCI backend.
x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND
for the fully featured backend driver.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
---
Since v3:
- Fix >>32 shift for 32-bit architectures
- Move CONFIG_XEN_PCIDEV_STUB into this patch
Since v2:
- swap the patch order
Since v1:
- Do not move pci_xen_initial_domain as it is x86 specific
---
arch/x86/include/asm/xen/pci.h | 16 -----
arch/x86/pci/xen.c | 74 +-------------------
drivers/xen/Kconfig | 20 ++++++
drivers/xen/pci.c | 75 +++++++++++++++++++++
| 8 ++-
drivers/xen/xen-pciback/pci_stub.c | 3 +-
drivers/xen/xen-pciback/xenbus.c | 2 +-
include/xen/pci.h | 28 ++++++++
8 files changed, 133 insertions(+), 93 deletions(-)
create mode 100644 include/xen/pci.h
diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h
index 3506d8c598c1..4b08c2b809ea 100644
--- a/arch/x86/include/asm/xen/pci.h
+++ b/arch/x86/include/asm/xen/pci.h
@@ -16,27 +16,11 @@ static inline int pci_xen_hvm_init(void)
#endif
#if defined(CONFIG_XEN_DOM0)
int __init pci_xen_initial_domain(void);
-int xen_find_device_domain_owner(struct pci_dev *dev);
-int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain);
-int xen_unregister_device_domain_owner(struct pci_dev *dev);
#else
static inline int __init pci_xen_initial_domain(void)
{
return -1;
}
-static inline int xen_find_device_domain_owner(struct pci_dev *dev)
-{
- return -1;
-}
-static inline int xen_register_device_domain_owner(struct pci_dev *dev,
- uint16_t domain)
-{
- return -1;
-}
-static inline int xen_unregister_device_domain_owner(struct pci_dev *dev)
-{
- return -1;
-}
#endif
#if defined(CONFIG_PCI_MSI)
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 3d41a09c2c14..4a45b0bf9ae4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -23,6 +23,7 @@
#include <xen/features.h>
#include <xen/events.h>
+#include <xen/pci.h>
#include <asm/xen/pci.h>
#include <asm/xen/cpuid.h>
#include <asm/apic.h>
@@ -583,77 +584,4 @@ int __init pci_xen_initial_domain(void)
}
return 0;
}
-
-struct xen_device_domain_owner {
- domid_t domain;
- struct pci_dev *dev;
- struct list_head list;
-};
-
-static DEFINE_SPINLOCK(dev_domain_list_spinlock);
-static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
-
-static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
-{
- struct xen_device_domain_owner *owner;
-
- list_for_each_entry(owner, &dev_domain_list, list) {
- if (owner->dev == dev)
- return owner;
- }
- return NULL;
-}
-
-int xen_find_device_domain_owner(struct pci_dev *dev)
-{
- struct xen_device_domain_owner *owner;
- int domain = -ENODEV;
-
- spin_lock(&dev_domain_list_spinlock);
- owner = find_device(dev);
- if (owner)
- domain = owner->domain;
- spin_unlock(&dev_domain_list_spinlock);
- return domain;
-}
-EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
-
-int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
-{
- struct xen_device_domain_owner *owner;
-
- owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
- if (!owner)
- return -ENODEV;
-
- spin_lock(&dev_domain_list_spinlock);
- if (find_device(dev)) {
- spin_unlock(&dev_domain_list_spinlock);
- kfree(owner);
- return -EEXIST;
- }
- owner->domain = domain;
- owner->dev = dev;
- list_add_tail(&owner->list, &dev_domain_list);
- spin_unlock(&dev_domain_list_spinlock);
- return 0;
-}
-EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
-
-int xen_unregister_device_domain_owner(struct pci_dev *dev)
-{
- struct xen_device_domain_owner *owner;
-
- spin_lock(&dev_domain_list_spinlock);
- owner = find_device(dev);
- if (!owner) {
- spin_unlock(&dev_domain_list_spinlock);
- return -ENODEV;
- }
- list_del(&owner->list);
- spin_unlock(&dev_domain_list_spinlock);
- kfree(owner);
- return 0;
-}
-EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
#endif
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 4efc95ddda41..75b9330dc6fd 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -184,6 +184,26 @@ config SWIOTLB_XEN
config XEN_PCI_STUB
bool
+config XEN_PCIDEV_STUB
+ tristate "Xen PCI-device stub driver"
+ depends on PCI && !X86 && XEN
+ depends on XEN_BACKEND
+ select XEN_PCI_STUB
+ default m
+ help
+ The PCI device stub driver provides limited version of the PCI
+ device backend driver without para-virtualized support for guests.
+ If you select this to be a module, you will need to make sure no
+ other driver has bound to the device(s) you want to make visible to
+ other guests.
+
+ The "hide" parameter (only applicable if backend driver is compiled
+ into the kernel) allows you to bind the PCI devices to this module
+ from the default device drivers. The argument is the list of PCI BDFs:
+ xen-pciback.hide=(03:00.0)(04:00.0)
+
+ If in doubt, say m.
+
config XEN_PCIDEV_BACKEND
tristate "Xen PCI-device backend driver"
depends on PCI && X86 && XEN
diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index 224df03ce42e..fc8c1249d49f 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -254,3 +254,78 @@ static int xen_mcfg_late(void)
return 0;
}
#endif
+
+#ifdef CONFIG_XEN_DOM0
+struct xen_device_domain_owner {
+ domid_t domain;
+ struct pci_dev *dev;
+ struct list_head list;
+};
+
+static DEFINE_SPINLOCK(dev_domain_list_spinlock);
+static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
+
+static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+
+ list_for_each_entry(owner, &dev_domain_list, list) {
+ if (owner->dev == dev)
+ return owner;
+ }
+ return NULL;
+}
+
+int xen_find_device_domain_owner(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+ int domain = -ENODEV;
+
+ spin_lock(&dev_domain_list_spinlock);
+ owner = find_device(dev);
+ if (owner)
+ domain = owner->domain;
+ spin_unlock(&dev_domain_list_spinlock);
+ return domain;
+}
+EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
+
+int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
+{
+ struct xen_device_domain_owner *owner;
+
+ owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
+ if (!owner)
+ return -ENODEV;
+
+ spin_lock(&dev_domain_list_spinlock);
+ if (find_device(dev)) {
+ spin_unlock(&dev_domain_list_spinlock);
+ kfree(owner);
+ return -EEXIST;
+ }
+ owner->domain = domain;
+ owner->dev = dev;
+ list_add_tail(&owner->list, &dev_domain_list);
+ spin_unlock(&dev_domain_list_spinlock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
+
+int xen_unregister_device_domain_owner(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+
+ spin_lock(&dev_domain_list_spinlock);
+ owner = find_device(dev);
+ if (!owner) {
+ spin_unlock(&dev_domain_list_spinlock);
+ return -ENODEV;
+ }
+ list_del(&owner->list);
+ spin_unlock(&dev_domain_list_spinlock);
+ kfree(owner);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
+#endif
--git a/drivers/xen/xen-pciback/conf_space_header.c b/drivers/xen/xen-pciback/conf_space_header.c
index ac45cdc38e85..981435103af1 100644
--- a/drivers/xen/xen-pciback/conf_space_header.c
+++ b/drivers/xen/xen-pciback/conf_space_header.c
@@ -236,8 +236,12 @@ static void *bar_init(struct pci_dev *dev, int offset)
else {
pos = (offset - PCI_BASE_ADDRESS_0) / 4;
if (pos && (res[pos - 1].flags & IORESOURCE_MEM_64)) {
- bar->val = res[pos - 1].start >> 32;
- bar->len_val = -resource_size(&res[pos - 1]) >> 32;
+ /*
+ * Use ">> 16 >> 16" instead of direct ">> 32" shift
+ * to avoid warnings on 32-bit architectures.
+ */
+ bar->val = res[pos - 1].start >> 16 >> 16;
+ bar->len_val = -resource_size(&res[pos - 1]) >> 16 >> 16;
return bar;
}
}
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index f8e4faa96ad6..bba527620507 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -19,7 +19,8 @@
#include <linux/sched.h>
#include <linux/atomic.h>
#include <xen/events.h>
-#include <asm/xen/pci.h>
+#include <xen/pci.h>
+#include <xen/xen.h>
#include <asm/xen/hypervisor.h>
#include <xen/interface/physdev.h>
#include "pciback.h"
diff --git a/drivers/xen/xen-pciback/xenbus.c b/drivers/xen/xen-pciback/xenbus.c
index f8ba2903a3ff..bde63ef677b8 100644
--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -14,7 +14,7 @@
#include <linux/workqueue.h>
#include <xen/xenbus.h>
#include <xen/events.h>
-#include <asm/xen/pci.h>
+#include <xen/pci.h>
#include "pciback.h"
#define INVALID_EVTCHN_IRQ (-1)
diff --git a/include/xen/pci.h b/include/xen/pci.h
new file mode 100644
index 000000000000..b8337cf85fd1
--- /dev/null
+++ b/include/xen/pci.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __XEN_PCI_H__
+#define __XEN_PCI_H__
+
+#if defined(CONFIG_XEN_DOM0)
+int xen_find_device_domain_owner(struct pci_dev *dev);
+int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain);
+int xen_unregister_device_domain_owner(struct pci_dev *dev);
+#else
+static inline int xen_find_device_domain_owner(struct pci_dev *dev)
+{
+ return -1;
+}
+
+static inline int xen_register_device_domain_owner(struct pci_dev *dev,
+ uint16_t domain)
+{
+ return -1;
+}
+
+static inline int xen_unregister_device_domain_owner(struct pci_dev *dev)
+{
+ return -1;
+}
+#endif
+
+#endif
--
2.25.1
next prev parent reply other threads:[~2021-09-27 6:58 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-27 6:58 [PATCH v4 1/2] xen-pciback: prepare for the split for stub and PV Oleksandr Andrushchenko
2021-09-27 6:58 ` Oleksandr Andrushchenko [this message]
2021-09-27 7:26 ` Jan Beulich
2021-09-27 7:35 ` Oleksandr Andrushchenko
2021-09-27 7:48 ` Jan Beulich
2021-09-27 7:54 ` Juergen Gross
2021-09-28 4:18 ` Stefano Stabellini
2021-09-28 4:53 ` Oleksandr Andrushchenko
2021-09-28 6:42 ` Jan Beulich
2021-09-28 6:56 ` Oleksandr Andrushchenko
2021-09-28 6:59 ` Juergen Gross
2021-09-28 7:17 ` Oleksandr Andrushchenko
2021-09-28 7:20 ` Juergen Gross
2021-09-28 7:24 ` Oleksandr Andrushchenko
2021-09-28 7:26 ` Juergen Gross
2021-09-28 7:20 ` Stefano Stabellini
2021-09-28 7:24 ` Oleksandr Andrushchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210927065822.350973-2-andr2000@gmail.com \
--to=andr2000@gmail.com \
--cc=anastasiia_lukianenko@epam.com \
--cc=boris.ostrovsky@oracle.com \
--cc=jbeulich@suse.com \
--cc=jgross@suse.com \
--cc=julien@xen.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oleksandr_andrushchenko@epam.com \
--cc=sstabellini@kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.