From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <aardelean@deviqon.com>
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Subject: Re: [PATCH] iio: adc: max1363: convert probe to full device-managed
Date: Thu, 30 Sep 2021 17:12:37 +0100 [thread overview]
Message-ID: <20210930171237.4b8d36c7@jic23-huawei> (raw)
In-Reply-To: <20210926162110.3536436-1-aardelean@deviqon.com>
On Sun, 26 Sep 2021 19:21:10 +0300
Alexandru Ardelean <aardelean@deviqon.com> wrote:
> For this conversion, the 2 regulators (being enabled) require each a
> devm_add_action_or_reset() hook registration.
>
> For the other functions, there are device-managed variants.
>
> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Thanks - one of my few drivers so no need for me to poke anyone else on this one :)
Applied to the togreg branch of iio.git and pushed out as testing
for 0-day to work it's magic.
Jonathan
> ---
> drivers/iio/adc/max1363.c | 82 ++++++++++++++-------------------------
> 1 file changed, 30 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
> index f2b576c69949..eef55ed4814a 100644
> --- a/drivers/iio/adc/max1363.c
> +++ b/drivers/iio/adc/max1363.c
> @@ -1577,6 +1577,11 @@ static const struct of_device_id max1363_of_match[] = {
> };
> MODULE_DEVICE_TABLE(of, max1363_of_match);
>
> +static void max1363_reg_disable(void *reg)
> +{
> + regulator_disable(reg);
> +}
> +
> static int max1363_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -1590,7 +1595,8 @@ static int max1363_probe(struct i2c_client *client,
> if (!indio_dev)
> return -ENOMEM;
>
> - ret = iio_map_array_register(indio_dev, client->dev.platform_data);
> + ret = devm_iio_map_array_register(&client->dev, indio_dev,
> + client->dev.platform_data);
> if (ret < 0)
> return ret;
>
> @@ -1598,17 +1604,16 @@ static int max1363_probe(struct i2c_client *client,
>
> mutex_init(&st->lock);
> st->reg = devm_regulator_get(&client->dev, "vcc");
> - if (IS_ERR(st->reg)) {
> - ret = PTR_ERR(st->reg);
> - goto error_unregister_map;
> - }
> + if (IS_ERR(st->reg))
> + return PTR_ERR(st->reg);
>
> ret = regulator_enable(st->reg);
> if (ret)
> - goto error_unregister_map;
> + return ret;
>
> - /* this is only used for device removal purposes */
> - i2c_set_clientdata(client, indio_dev);
> + ret = devm_add_action_or_reset(&client->dev, max1363_reg_disable, st->reg);
> + if (ret)
> + return ret;
>
> st->chip_info = device_get_match_data(&client->dev);
> if (!st->chip_info)
> @@ -1622,13 +1627,17 @@ static int max1363_probe(struct i2c_client *client,
>
> ret = regulator_enable(vref);
> if (ret)
> - goto error_disable_reg;
> + return ret;
> +
> + ret = devm_add_action_or_reset(&client->dev, max1363_reg_disable, vref);
> + if (ret)
> + return ret;
> +
> st->vref = vref;
> vref_uv = regulator_get_voltage(vref);
> - if (vref_uv <= 0) {
> - ret = -EINVAL;
> - goto error_disable_reg;
> - }
> + if (vref_uv <= 0)
> + return -EINVAL;
> +
> st->vref_uv = vref_uv;
> }
>
> @@ -1640,13 +1649,12 @@ static int max1363_probe(struct i2c_client *client,
> st->send = max1363_smbus_send;
> st->recv = max1363_smbus_recv;
> } else {
> - ret = -EOPNOTSUPP;
> - goto error_disable_reg;
> + return -EOPNOTSUPP;
> }
>
> ret = max1363_alloc_scan_masks(indio_dev);
> if (ret)
> - goto error_disable_reg;
> + return ret;
>
> indio_dev->name = id->name;
> indio_dev->channels = st->chip_info->channels;
> @@ -1655,12 +1663,12 @@ static int max1363_probe(struct i2c_client *client,
> indio_dev->modes = INDIO_DIRECT_MODE;
> ret = max1363_initial_setup(st);
> if (ret < 0)
> - goto error_disable_reg;
> + return ret;
>
> - ret = iio_triggered_buffer_setup(indio_dev, NULL,
> - &max1363_trigger_handler, NULL);
> + ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
> + &max1363_trigger_handler, NULL);
> if (ret)
> - goto error_disable_reg;
> + return ret;
>
> if (client->irq) {
> ret = devm_request_threaded_irq(&client->dev, st->client->irq,
> @@ -1671,39 +1679,10 @@ static int max1363_probe(struct i2c_client *client,
> indio_dev);
>
> if (ret)
> - goto error_uninit_buffer;
> + return ret;
> }
>
> - ret = iio_device_register(indio_dev);
> - if (ret < 0)
> - goto error_uninit_buffer;
> -
> - return 0;
> -
> -error_uninit_buffer:
> - iio_triggered_buffer_cleanup(indio_dev);
> -error_disable_reg:
> - if (st->vref)
> - regulator_disable(st->vref);
> - regulator_disable(st->reg);
> -error_unregister_map:
> - iio_map_array_unregister(indio_dev);
> - return ret;
> -}
> -
> -static int max1363_remove(struct i2c_client *client)
> -{
> - struct iio_dev *indio_dev = i2c_get_clientdata(client);
> - struct max1363_state *st = iio_priv(indio_dev);
> -
> - iio_device_unregister(indio_dev);
> - iio_triggered_buffer_cleanup(indio_dev);
> - if (st->vref)
> - regulator_disable(st->vref);
> - regulator_disable(st->reg);
> - iio_map_array_unregister(indio_dev);
> -
> - return 0;
> + return devm_iio_device_register(&client->dev, indio_dev);
> }
>
> static const struct i2c_device_id max1363_id[] = {
> @@ -1756,7 +1735,6 @@ static struct i2c_driver max1363_driver = {
> .of_match_table = max1363_of_match,
> },
> .probe = max1363_probe,
> - .remove = max1363_remove,
> .id_table = max1363_id,
> };
> module_i2c_driver(max1363_driver);
prev parent reply other threads:[~2021-09-30 16:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-26 16:21 [PATCH] iio: adc: max1363: convert probe to full device-managed Alexandru Ardelean
2021-09-30 16:12 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210930171237.4b8d36c7@jic23-huawei \
--to=jic23@kernel.org \
--cc=aardelean@deviqon.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.