From: Hannes Reinecke <hare@suse.de>
To: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>,
Keith Busch <keith.busch@wdc.com>,
linux-nvme@lists.infradead.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCHv3] [RESEND] nvme: generate uevent once a multipath namespace is operational again
Date: Wed, 6 Oct 2021 11:13:13 +0200 [thread overview]
Message-ID: <20211006091313.66055-1-hare@suse.de> (raw)
When fast_io_fail_tmo is set I/O will be aborted while recovery is
still ongoing. This causes MD to set the namespace to failed, and
no futher I/O will be submitted to that namespace.
However, once the recovery succeeds and the namespace becomes
operational again the NVMe subsystem doesn't send a notification,
so MD cannot automatically reinstate operation and requires
manual interaction.
This patch will send a KOBJ_CHANGE uevent per multipathed namespace
once the underlying controller transitions to LIVE, allowing an automatic
MD reassembly with these udev rules:
/etc/udev/rules.d/65-md-auto-re-add.rules:
SUBSYSTEM!="block", GOTO="md_end"
ACTION!="change", GOTO="md_end"
ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
PROGRAM="/sbin/md_raid_auto_readd.sh $devnode"
LABEL="md_end"
/sbin/md_raid_auto_readd.sh:
MDADM=/sbin/mdadm
DEVNAME=$1
export $(${MDADM} --examine --export ${DEVNAME})
if [ -z "${MD_UUID}" ]; then
exit 1
fi
UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID})
MD_DEVNAME=${UUID_LINK##*/}
export $(${MDADM} --detail --export /dev/${MD_DEVNAME})
if [ -z "${MD_METADATA}" ] ; then
exit 1
fi
if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then
echo "${MD_DEVNAME}: array not degraded, nothing to do"
exit 0
fi
MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state)
if [ ${MD_STATE} != "clean" ] ; then
echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add"
exit 1
fi
MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE"
if [ ${!MD_VARNAME} = "spare" ] ; then
${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME}
fi
Changes to v2:
- Add udev rules example to description
Changes to v1:
- use disk_uevent() as suggested by hch
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/nvme/host/multipath.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index e8ccdd398f78..fb96e900dd3a 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -100,8 +100,11 @@ void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl)
down_read(&ctrl->namespaces_rwsem);
list_for_each_entry(ns, &ctrl->namespaces, list) {
- if (ns->head->disk)
- kblockd_schedule_work(&ns->head->requeue_work);
+ if (!ns->head->disk)
+ continue;
+ kblockd_schedule_work(&ns->head->requeue_work);
+ if (ctrl->state == NVME_CTRL_LIVE)
+ disk_uevent(ns->head->disk, KOBJ_CHANGE);
}
up_read(&ctrl->namespaces_rwsem);
}
--
2.29.2
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
next reply other threads:[~2021-10-06 9:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-06 9:13 Hannes Reinecke [this message]
2021-10-12 13:02 ` [PATCHv3] [RESEND] nvme: generate uevent once a multipath namespace is operational again Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211006091313.66055-1-hare@suse.de \
--to=hare@suse.de \
--cc=hch@lst.de \
--cc=keith.busch@wdc.com \
--cc=linux-nvme@lists.infradead.org \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.