From: "Marek Behún" <kabel@kernel.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
linux-pci@vger.kernel.org, pali@kernel.org,
"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 11/14] PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridge
Date: Tue, 12 Oct 2021 18:41:42 +0200 [thread overview]
Message-ID: <20211012164145.14126-12-kabel@kernel.org> (raw)
In-Reply-To: <20211012164145.14126-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
From very vague, ambiguous and incomplete information from Marvell we
deduced that the 32-bit Aardvark register at address 0x4
(PCIE_CORE_CMD_STATUS_REG), which is not documented for Root Complex mode
in the Functional Specification (only for Endpoint mode), controls two
16-bit PCIe registers: Command Register and Status Registers of PCIe Root
Port.
This means that bit 2 controls bus mastering and forwarding of memory and
I/O requests in the upstream direction. According to PCI specifications
bits [0:2] of Command Register, this should be by default disabled on
reset. So explicitly disable these bits at early setup of the Aardvark
driver.
Remove code which unconditionally enables all 3 bits and let kernel code
(via pci_set_master() function) to handle bus mastering of Root PCIe
Bridge via emulated PCI_COMMAND on emulated bridge.
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # b2a56469d550 ("PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access")
---
drivers/pci/controller/pci-aardvark.c | 54 +++++++++++++++++++--------
1 file changed, 38 insertions(+), 16 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 337b61508799..289cd45ed1ec 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -31,9 +31,6 @@
/* PCIe core registers */
#define PCIE_CORE_DEV_ID_REG 0x0
#define PCIE_CORE_CMD_STATUS_REG 0x4
-#define PCIE_CORE_CMD_IO_ACCESS_EN BIT(0)
-#define PCIE_CORE_CMD_MEM_ACCESS_EN BIT(1)
-#define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2)
#define PCIE_CORE_DEV_REV_REG 0x8
#define PCIE_CORE_PCIEXP_CAP 0xc0
#define PCIE_CORE_ERR_CAPCTL_REG 0x118
@@ -516,6 +513,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
advk_writel(pcie, reg, VENDOR_ID_REG);
+ /* Disable Root Bridge I/O space, memory space and bus mastering */
+ reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+
/* Set Advanced Error Capabilities and Control PF0 register */
reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
@@ -620,19 +622,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
advk_pcie_disable_ob_win(pcie, i);
advk_pcie_train_link(pcie);
-
- /*
- * FIXME: The following register update is suspicious. This register is
- * applicable only when the PCI controller is configured for Endpoint
- * mode, not as a Root Complex. But apparently when this code is
- * removed, some cards stop working. This should be investigated and
- * a comment explaining this should be put here.
- */
- reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
- reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
- PCIE_CORE_CMD_IO_ACCESS_EN |
- PCIE_CORE_CMD_MEM_IO_REQ_EN;
- advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
}
static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
@@ -761,6 +750,37 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
return -ETIMEDOUT;
}
+static pci_bridge_emul_read_status_t
+advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
+ int reg, u32 *value)
+{
+ struct advk_pcie *pcie = bridge->data;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ *value = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+ return PCI_BRIDGE_EMUL_HANDLED;
+
+ default:
+ return PCI_BRIDGE_EMUL_NOT_HANDLED;
+ }
+}
+
+static void
+advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
+ int reg, u32 old, u32 new, u32 mask)
+{
+ struct advk_pcie *pcie = bridge->data;
+
+ switch (reg) {
+ case PCI_COMMAND:
+ advk_writel(pcie, new, PCIE_CORE_CMD_STATUS_REG);
+ break;
+
+ default:
+ break;
+ }
+}
static pci_bridge_emul_read_status_t
advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
@@ -862,6 +882,8 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
}
static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
+ .read_base = advk_pci_bridge_emul_base_conf_read,
+ .write_base = advk_pci_bridge_emul_base_conf_write,
.read_pcie = advk_pci_bridge_emul_pcie_conf_read,
.write_pcie = advk_pci_bridge_emul_pcie_conf_write,
};
--
2.32.0
next prev parent reply other threads:[~2021-10-12 16:42 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-12 16:41 [PATCH 00/14] PCI: aardvark controller fixes BATCH 2 Marek Behún
2021-10-12 16:41 ` [PATCH 01/14] PCI: pci-bridge-emul: Fix emulation of W1C bits Marek Behún
2021-10-12 16:41 ` [PATCH 02/14] PCI: aardvark: Fix return value of MSI domain .alloc() method Marek Behún
2021-10-27 11:26 ` Lorenzo Pieralisi
2021-10-27 11:31 ` Pali Rohár
2021-10-12 16:41 ` [PATCH 03/14] PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG Marek Behún
2021-10-12 16:41 ` [PATCH 04/14] PCI: aardvark: Fix support for MSI interrupts Marek Behún
2021-10-12 16:41 ` [PATCH 05/14] PCI: aardvark: Fix reading MSI interrupt number Marek Behún
2021-10-12 16:41 ` [PATCH 06/14] PCI: aardvark: Clear all MSIs at setup Marek Behún
2021-10-12 16:41 ` [PATCH 07/14] PCI: aardvark: Refactor unmasking summary MSI interrupt Marek Behún
2021-10-12 16:41 ` [PATCH 08/14] PCI: aardvark: Fix masking MSI interrupts Marek Behún
2021-10-12 16:41 ` [PATCH 09/14] PCI: aardvark: Fix setting MSI address Marek Behún
2021-10-12 16:41 ` [PATCH 10/14] PCI: aardvark: Enable MSI-X support Marek Behún
2021-10-27 14:12 ` Lorenzo Pieralisi
2021-10-27 14:23 ` Pali Rohár
2021-10-28 11:08 ` Lorenzo Pieralisi
2021-10-28 11:13 ` Pali Rohár
2021-10-28 11:30 ` Lorenzo Pieralisi
2021-10-28 11:37 ` Pali Rohár
2021-10-28 15:24 ` Marc Zyngier
2021-10-28 15:29 ` Pali Rohár
2021-10-28 15:51 ` Marek Behún
2021-10-28 16:22 ` Marc Zyngier
2021-10-28 16:25 ` Marek Behún
2021-10-28 17:00 ` Marc Zyngier
2021-10-28 17:47 ` Lorenzo Pieralisi
2021-10-28 18:24 ` Marek Behún
2021-10-12 16:41 ` Marek Behún [this message]
2021-10-12 16:41 ` [PATCH 12/14] PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge Marek Behún
2021-10-28 18:30 ` Lorenzo Pieralisi
2021-10-28 18:45 ` Pali Rohár
2021-10-28 20:43 ` Bjorn Helgaas
2021-10-12 16:41 ` [PATCH 13/14] PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge Marek Behún
2021-10-12 16:41 ` [PATCH 14/14] PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 " Marek Behún
2021-10-19 18:36 ` [PATCH 00/14] PCI: aardvark controller fixes BATCH 2 Pali Rohár
2021-10-28 18:33 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211012164145.14126-12-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.