From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, eblake@redhat.com, peter.maydell@linaro.org
Cc: mark.cave-ayland@ilande.co.uk, alistair.francis@wdc.com,
richard.henderson@linaro.org, shorne@gmail.com,
atar4qemu@gmail.com
Subject: [PATCH] Fix %#08 misuses
Date: Thu, 14 Oct 2021 19:52:45 +0100 [thread overview]
Message-ID: <20211014185245.69803-1-dgilbert@redhat.com> (raw)
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Joe Perches pointed out on lkml [1] that the format special %# (which
adds 0x) is included in the character count, i.e.:
printf("0: %#08x\n0: %#08x\n", 0xabcdef01,1);
gives:
0: 0xabcdef01
0: 0x000001
rather than padding to the expected 8 data characters.
It looks like we use '%#.8x' in some places and that
seems like it works:
printf(".: %#.8x\n.: %#.8x\n", 0xabcdef01,1);
.: 0xabcdef01
.: 0x00000001
Replace all the '%#08' cases by '%#.8' ; I've not
attacked the other lengths yet.
Although I'm tempted to think that perhaps we should just
prefer '0x%08' which seems clearer.
(Note I've not managed to test most of these)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[1] https://lore.kernel.org/lkml/9499203f1e993872b384aabdec59ac223a8ab931.camel@perches.com/
---
disas/alpha.c | 2 +-
disas/sparc.c | 2 +-
hw/arm/omap1.c | 2 +-
hw/timer/a9gtimer.c | 4 ++--
include/hw/arm/omap.h | 4 ++--
softmmu/device_tree.c | 2 +-
target/openrisc/disas.c | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/disas/alpha.c b/disas/alpha.c
index 3db90fa665..6da5c473d8 100644
--- a/disas/alpha.c
+++ b/disas/alpha.c
@@ -1851,7 +1851,7 @@ print_insn_alpha (bfd_vma memaddr, struct disassemble_info *info)
}
/* No instruction found */
- (*info->fprintf_func) (info->stream, ".long %#08x", insn);
+ (*info->fprintf_func) (info->stream, ".long %#.8x", insn);
return 4;
diff --git a/disas/sparc.c b/disas/sparc.c
index 5689533ce1..9f1160ab1c 100644
--- a/disas/sparc.c
+++ b/disas/sparc.c
@@ -3231,6 +3231,6 @@ print_insn_sparc (bfd_vma memaddr, disassemble_info *info)
}
info->insn_type = dis_noninsn; /* Mark as non-valid instruction. */
- (*info->fprintf_func) (stream, ".long %#08lx", insn);
+ (*info->fprintf_func) (stream, ".long %#.8lx", insn);
return sizeof (buffer);
}
diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c
index 180d3788f8..cff8ecb7d6 100644
--- a/hw/arm/omap1.c
+++ b/hw/arm/omap1.c
@@ -42,7 +42,7 @@
static inline void omap_log_badwidth(const char *funcname, hwaddr addr, int sz)
{
- qemu_log_mask(LOG_GUEST_ERROR, "%s: %d-bit register %#08" HWADDR_PRIx "\n",
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: %d-bit register %#.8" HWADDR_PRIx "\n",
funcname, 8 * sz, addr);
}
diff --git a/hw/timer/a9gtimer.c b/hw/timer/a9gtimer.c
index 7233068a37..c53edd8b44 100644
--- a/hw/timer/a9gtimer.c
+++ b/hw/timer/a9gtimer.c
@@ -169,7 +169,7 @@ static uint64_t a9_gtimer_read(void *opaque, hwaddr addr, unsigned size)
return 0;
}
- DB_PRINT("addr:%#x data:%#08" PRIx64 "\n", (unsigned)addr, ret);
+ DB_PRINT("addr:%#x data:%#.8" PRIx64 "\n", (unsigned)addr, ret);
return ret;
}
@@ -180,7 +180,7 @@ static void a9_gtimer_write(void *opaque, hwaddr addr, uint64_t value,
A9GTimerState *s = gtb->parent;
int shift = 0;
- DB_PRINT("addr:%#x data:%#08" PRIx64 "\n", (unsigned)addr, value);
+ DB_PRINT("addr:%#x data:%#.8" PRIx64 "\n", (unsigned)addr, value);
switch (addr) {
case R_COUNTER_HI:
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index ff6a173f8a..47616bbba3 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -1003,10 +1003,10 @@ void omap_badwidth_write32(void *opaque, hwaddr addr,
void omap_mpu_wakeup(void *opaque, int irq, int req);
# define OMAP_BAD_REG(paddr) \
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad register %#08"HWADDR_PRIx"\n", \
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad register %#.8"HWADDR_PRIx"\n", \
__func__, paddr)
# define OMAP_RO_REG(paddr) \
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Read-only register %#08" \
+ qemu_log_mask(LOG_GUEST_ERROR, "%s: Read-only register %#.8" \
HWADDR_PRIx "\n", \
__func__, paddr)
diff --git a/softmmu/device_tree.c b/softmmu/device_tree.c
index b621f63fba..bd271ab66e 100644
--- a/softmmu/device_tree.c
+++ b/softmmu/device_tree.c
@@ -367,7 +367,7 @@ int qemu_fdt_setprop_cell(void *fdt, const char *node_path,
r = fdt_setprop_cell(fdt, findnode_nofail(fdt, node_path), property, val);
if (r < 0) {
- error_report("%s: Couldn't set %s/%s = %#08x: %s", __func__,
+ error_report("%s: Couldn't set %s/%s = %#.8x: %s", __func__,
node_path, property, val, fdt_strerror(r));
exit(1);
}
diff --git a/target/openrisc/disas.c b/target/openrisc/disas.c
index dc025bd64d..024f243a45 100644
--- a/target/openrisc/disas.c
+++ b/target/openrisc/disas.c
@@ -45,7 +45,7 @@ int print_insn_or1k(bfd_vma addr, disassemble_info *info)
insn = bfd_getb32(buffer);
if (!decode(info, insn)) {
- output(".long", "%#08x", insn);
+ output(".long", "%#.8x", insn);
}
return 4;
}
--
2.31.1
next reply other threads:[~2021-10-14 18:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-14 18:52 Dr. David Alan Gilbert (git) [this message]
2021-10-14 19:33 ` [PATCH] Fix %#08 misuses Richard Henderson
2021-10-14 21:56 ` Stafford Horne
2021-10-18 9:47 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211014185245.69803-1-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=alistair.francis@wdc.com \
--cc=atar4qemu@gmail.com \
--cc=eblake@redhat.com \
--cc=mark.cave-ayland@ilande.co.uk \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=shorne@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.