From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, Jakub Kicinski <kuba@kernel.org>,
pcnet32@frontier.com
Subject: [PATCH net-next 04/12] ethernet: amd: use eth_hw_addr_set()
Date: Fri, 15 Oct 2021 15:16:44 -0700 [thread overview]
Message-ID: <20211015221652.827253-5-kuba@kernel.org> (raw)
In-Reply-To: <20211015221652.827253-1-kuba@kernel.org>
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Read the address into an array on the stack, then call
eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
CC: pcnet32@frontier.com
---
drivers/net/ethernet/amd/amd8111e.c | 4 +++-
drivers/net/ethernet/amd/pcnet32.c | 13 +++++++++----
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
index 0b493467b042..9421afb950f7 100644
--- a/drivers/net/ethernet/amd/amd8111e.c
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -1743,6 +1743,7 @@ static int amd8111e_probe_one(struct pci_dev *pdev,
unsigned long reg_addr, reg_len;
struct amd8111e_priv *lp;
struct net_device *dev;
+ u8 addr[ETH_ALEN];
err = pci_enable_device(pdev);
if (err) {
@@ -1809,7 +1810,8 @@ static int amd8111e_probe_one(struct pci_dev *pdev,
/* Initializing MAC address */
for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = readb(lp->mmio + PADR + i);
+ addr[i] = readb(lp->mmio + PADR + i);
+ eth_hw_addr_set(dev, addr);
/* Setting user defined parametrs */
lp->ext_phy_option = speed_duplex[card_idx];
diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index 820baa2604ac..f5c50ff377ff 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -1595,6 +1595,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
struct net_device *dev;
const struct pcnet32_access *a = NULL;
u8 promaddr[ETH_ALEN];
+ u8 addr[ETH_ALEN];
int ret = -ENODEV;
/* reset the chip */
@@ -1760,9 +1761,10 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
unsigned int val;
val = a->read_csr(ioaddr, i + 12) & 0x0ffff;
/* There may be endianness issues here. */
- dev->dev_addr[2 * i] = val & 0x0ff;
- dev->dev_addr[2 * i + 1] = (val >> 8) & 0x0ff;
+ addr[2 * i] = val & 0x0ff;
+ addr[2 * i + 1] = (val >> 8) & 0x0ff;
}
+ eth_hw_addr_set(dev, addr);
/* read PROM address and compare with CSR address */
for (i = 0; i < ETH_ALEN; i++)
@@ -1780,8 +1782,11 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
}
/* if the ethernet address is not valid, force to 00:00:00:00:00:00 */
- if (!is_valid_ether_addr(dev->dev_addr))
- eth_zero_addr(dev->dev_addr);
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ static const u8 zero_addr[ETH_ALEN] = {};
+
+ eth_hw_addr_set(dev, zero_addr);
+ }
if (pcnet32_debug & NETIF_MSG_PROBE) {
pr_cont(" %pM", dev->dev_addr);
--
2.31.1
next prev parent reply other threads:[~2021-10-15 22:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-15 22:16 [PATCH net-next 00/12] ethernet: manual netdev->dev_addr conversions (part 1) Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 01/12] ethernet: adaptec: use eth_hw_addr_set() Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 02/12] ethernet: aeroflex: " Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 03/12] ethernet: alteon: " Jakub Kicinski
2021-10-19 7:49 ` jes
2021-10-15 22:16 ` Jakub Kicinski [this message]
2021-10-15 22:16 ` [PATCH net-next 05/12] ethernet: aquantia: " Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 06/12] ethernet: bnx2x: " Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 07/12] ethernet: bcmgenet: " Jakub Kicinski
2021-10-19 22:02 ` Florian Fainelli
2021-10-15 22:16 ` [PATCH net-next 08/12] ethernet: enic: " Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 09/12] ethernet: ec_bhf: " Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 10/12] ethernet: enetc: " Jakub Kicinski
2021-10-15 22:16 ` [PATCH net-next 11/12] ethernet: ibmveth: use ether_addr_to_u64() Jakub Kicinski
2021-10-15 22:16 ` Jakub Kicinski
2021-10-15 22:28 ` Tyrel Datwyler
2021-10-15 22:28 ` Tyrel Datwyler
2021-10-15 22:16 ` [PATCH net-next 12/12] ethernet: ixgb: use eth_hw_addr_set() Jakub Kicinski
2021-10-16 8:00 ` [PATCH net-next 00/12] ethernet: manual netdev->dev_addr conversions (part 1) patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211015221652.827253-5-kuba@kernel.org \
--to=kuba@kernel.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=pcnet32@frontier.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.