All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dan Williams <dan.j.williams@intel.com>
Cc: <linux-cxl@vger.kernel.org>, Ira Weiny <ira.weiny@intel.com>,
	<linux-pci@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 06/10] cxl/pci: Add @base to cxl_register_map
Date: Mon, 18 Oct 2021 10:30:29 +0100	[thread overview]
Message-ID: <20211018103029.0000538d@Huawei.com> (raw)
In-Reply-To: <163433497228.889435.11271988238496181536.stgit@dwillia2-desk3.amr.corp.intel.com>

On Fri, 15 Oct 2021 14:57:27 -0700
Dan Williams <dan.j.williams@intel.com> wrote:

> In addition to carrying @barno, @block_offset, and @reg_type, add @base
> to keep all map/unmap parameters in one object. The helpers
> cxl_{map,unmap}_regblock() handle adjusting @base to the @block_offset
> at map and unmap time.
> 
> Document that @base incorporates @block_offset so that downstream
> consumers of a mapped cxl_register_map instance do not need perform any
> fixups / can use @base directly.
> 
> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> Reviewed-by: Ira Weiny <ira.weiny@intel.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> ---
> Changes since v5:
> - add kernel-doc for cxl_register_map to explain the interaction between
>   @base and @block_offset. (Ira and Jonathan)
> 
>  drivers/cxl/cxl.h |   10 ++++++++++
>  drivers/cxl/pci.c |   31 ++++++++++++++++---------------
>  2 files changed, 26 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> index a6687e7fd598..5e2e93451928 100644
> --- a/drivers/cxl/cxl.h
> +++ b/drivers/cxl/cxl.h
> @@ -139,7 +139,17 @@ struct cxl_device_reg_map {
>  	struct cxl_reg_map memdev;
>  };
>  
> +/**
> + * struct cxl_register_map - DVSEC harvested register block mapping parameters
> + * @base: virtual base of the register-block-BAR + @block_offset
> + * @block_offset: offset to start of register block in @barno
> + * @reg_type: see enum cxl_regloc_type
> + * @barno: PCI BAR number containing the register block
> + * @component_map: cxl_reg_map for component registers
> + * @device_map: cxl_reg_maps for device registers
> + */
>  struct cxl_register_map {
> +	void __iomem *base;
>  	u64 block_offset;
>  	u8 reg_type;
>  	u8 barno;
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index eb0c2f1b9e65..7d5e5548b316 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -306,8 +306,7 @@ static int cxl_pci_setup_mailbox(struct cxl_mem *cxlm)
>  	return 0;
>  }
>  
> -static void __iomem *cxl_pci_map_regblock(struct pci_dev *pdev,
> -					  struct cxl_register_map *map)
> +static int cxl_map_regblock(struct pci_dev *pdev, struct cxl_register_map *map)
>  {
>  	void __iomem *addr;
>  	int bar = map->barno;
> @@ -318,24 +317,27 @@ static void __iomem *cxl_pci_map_regblock(struct pci_dev *pdev,
>  	if (pci_resource_len(pdev, bar) < offset) {
>  		dev_err(dev, "BAR%d: %pr: too small (offset: %pa)\n", bar,
>  			&pdev->resource[bar], &offset);
> -		return NULL;
> +		return -ENXIO;
>  	}
>  
>  	addr = pci_iomap(pdev, bar, 0);
>  	if (!addr) {
>  		dev_err(dev, "failed to map registers\n");
> -		return addr;
> +		return -ENOMEM;
>  	}
>  
>  	dev_dbg(dev, "Mapped CXL Memory Device resource bar %u @ %pa\n",
>  		bar, &offset);
>  
> -	return addr;
> +	map->base = addr + map->block_offset;
> +	return 0;
>  }
>  
> -static void cxl_pci_unmap_regblock(struct pci_dev *pdev, void __iomem *base)
> +static void cxl_unmap_regblock(struct pci_dev *pdev,
> +			       struct cxl_register_map *map)
>  {
> -	pci_iounmap(pdev, base);
> +	pci_iounmap(pdev, map->base - map->block_offset);
> +	map->base = NULL;
>  }
>  
>  static int cxl_pci_dvsec(struct pci_dev *pdev, int dvsec)
> @@ -361,12 +363,12 @@ static int cxl_pci_dvsec(struct pci_dev *pdev, int dvsec)
>  	return 0;
>  }
>  
> -static int cxl_probe_regs(struct pci_dev *pdev, void __iomem *base,
> -			  struct cxl_register_map *map)
> +static int cxl_probe_regs(struct pci_dev *pdev, struct cxl_register_map *map)
>  {
>  	struct cxl_component_reg_map *comp_map;
>  	struct cxl_device_reg_map *dev_map;
>  	struct device *dev = &pdev->dev;
> +	void __iomem *base = map->base;
>  
>  	switch (map->reg_type) {
>  	case CXL_REGLOC_RBI_COMPONENT:
> @@ -442,7 +444,6 @@ static void cxl_decode_regblock(u32 reg_lo, u32 reg_hi,
>   */
>  static int cxl_pci_setup_regs(struct cxl_mem *cxlm)
>  {
> -	void __iomem *base;
>  	u32 regloc_size, regblocks;
>  	int regloc, i, n_maps, ret = 0;
>  	struct device *dev = cxlm->dev;
> @@ -475,12 +476,12 @@ static int cxl_pci_setup_regs(struct cxl_mem *cxlm)
>  		if (map->reg_type > CXL_REGLOC_RBI_MEMDEV)
>  			continue;
>  
> -		base = cxl_pci_map_regblock(pdev, map);
> -		if (!base)
> -			return -ENOMEM;
> +		ret = cxl_map_regblock(pdev, map);
> +		if (ret)
> +			return ret;
>  
> -		ret = cxl_probe_regs(pdev, base + map->block_offset, map);
> -		cxl_pci_unmap_regblock(pdev, base);
> +		ret = cxl_probe_regs(pdev, map);
> +		cxl_unmap_regblock(pdev, map);
>  		if (ret)
>  			return ret;
>  
> 


  reply	other threads:[~2021-10-18  9:30 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-09 16:43 [PATCH v3 00/10] cxl_pci refactor for reusability Dan Williams
2021-10-09 16:43 ` Dan Williams
2021-10-09 16:44 ` [PATCH v3 01/10] cxl/pci: Convert register block identifiers to an enum Dan Williams
2021-10-09 16:44 ` [PATCH v3 02/10] cxl/pci: Remove dev_dbg for unknown register blocks Dan Williams
2021-10-09 16:48   ` Joe Perches
2021-10-09 18:04     ` Ben Widawsky
2021-10-09 16:44 ` [PATCH v3 03/10] cxl/pci: Fix NULL vs ERR_PTR confusion Dan Williams
2021-10-10  3:44   ` Ira Weiny
2021-10-15 16:15   ` Jonathan Cameron
2021-10-15 20:16     ` Dan Williams
2021-10-15 21:29   ` [PATCH v6 " Dan Williams
2021-10-09 16:44 ` [PATCH v3 04/10] cxl/pci: Remove pci request/release regions Dan Williams
2021-10-09 16:44 ` [PATCH v3 05/10] cxl/pci: Make more use of cxl_register_map Dan Williams
2021-10-09 19:04   ` kernel test robot
2021-10-09 19:04     ` kernel test robot
2021-10-09 20:51   ` [PATCH v4 " Dan Williams
2021-10-10  4:03     ` Ira Weiny
2021-10-13 23:53     ` [PATCH v5 " Dan Williams
2021-10-09 22:28   ` [PATCH v3 " kernel test robot
2021-10-09 22:28     ` kernel test robot
2021-10-09 16:44 ` [PATCH v3 06/10] cxl/pci: Add @base to cxl_register_map Dan Williams
2021-10-10  4:20   ` Ira Weiny
2021-10-13 22:53     ` Dan Williams
2021-10-15 16:29       ` Jonathan Cameron
2021-10-15 16:56         ` Dan Williams
2021-10-13 23:57   ` [PATCH v5 " Dan Williams
2021-10-15 21:57     ` [PATCH v6 " Dan Williams
2021-10-18  9:30       ` Jonathan Cameron [this message]
2021-10-15 16:27   ` [PATCH v3 " Jonathan Cameron
2021-10-15 16:55     ` Dan Williams
2021-10-18  9:30       ` Jonathan Cameron
2021-10-09 16:44 ` [PATCH v3 07/10] cxl/pci: Split cxl_pci_setup_regs() Dan Williams
2021-10-10  4:44   ` Ira Weiny
2021-10-13 22:45   ` Ben Widawsky
2021-10-13 22:49     ` Dan Williams
2021-10-14  0:12       ` Ben Widawsky
2021-10-14  0:48         ` Dan Williams
2021-10-15 16:44   ` Jonathan Cameron
2021-10-15 17:00     ` Dan Williams
2021-10-15 23:30   ` [PATCH v6 " Dan Williams
2021-11-10 17:14     ` Jonathan Cameron
2021-11-10 17:30       ` Ben Widawsky
2021-11-10 17:43         ` Jonathan Cameron
2021-10-09 16:44 ` [PATCH v3 08/10] PCI: Add pci_find_dvsec_capability to find designated VSEC Dan Williams
2021-10-09 16:44   ` Dan Williams
2021-10-09 16:44 ` [PATCH v3 09/10] cxl/pci: Use pci core's DVSEC functionality Dan Williams
2021-10-11 13:35   ` Jonathan Cameron
2021-10-09 16:44 ` [PATCH v3 10/10] ocxl: " Dan Williams
2021-10-09 16:44   ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211018103029.0000538d@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=dan.j.williams@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.