From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 6/7] staging: r8188eu: remove unused enums and defines from odm.h
Date: Tue, 19 Oct 2021 15:51:36 +0200 [thread overview]
Message-ID: <20211019135137.9893-7-straube.linux@gmail.com> (raw)
In-Reply-To: <20211019135137.9893-1-straube.linux@gmail.com>
Remove unused enums and defines from odm.h.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/include/odm.h | 95 ---------------------------
1 file changed, 95 deletions(-)
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
index 97a24f8d2f53..eb46386ceddd 100644
--- a/drivers/staging/r8188eu/include/odm.h
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -159,7 +159,6 @@ struct odm_rate_adapt {
#define IQK_MAC_REG_NUM 4
#define IQK_ADDA_REG_NUM 16
-#define IQK_BB_REG_NUM_MAX 10
#define IQK_BB_REG_NUM 9
#define HP_THERMAL_NUM 8
@@ -287,19 +286,6 @@ enum odm_ability_def {
# define ODM_ITRF_USB 0x2
-/* ODM_CMNINFO_RF_TYPE */
-/* For example 1T2R (A+AB = BIT(0)|BIT(4)|BIT(5)) */
-enum odm_rf_path {
- ODM_RF_TX_A = BIT(0),
- ODM_RF_TX_B = BIT(1),
- ODM_RF_TX_C = BIT(2),
- ODM_RF_TX_D = BIT(3),
- ODM_RF_RX_A = BIT(4),
- ODM_RF_RX_B = BIT(5),
- ODM_RF_RX_C = BIT(6),
- ODM_RF_RX_D = BIT(7),
-};
-
enum odm_rf_type {
ODM_1T1R = 0,
ODM_1T2R = 1,
@@ -311,14 +297,6 @@ enum odm_rf_type {
ODM_4T4R = 7,
};
-/* ODM Dynamic common info value definition */
-
-enum odm_mac_phy_mode {
- ODM_SMSP = 0,
- ODM_DMSP = 1,
- ODM_DMDP = 2,
-};
-
/* ODM_CMNINFO_OP_MODE */
enum odm_operation_mode {
ODM_NO_LINK = BIT(0),
@@ -341,38 +319,12 @@ enum odm_wireless_mode {
ODM_WM_AUTO = BIT(5),
};
-/* ODM_CMNINFO_SEC_CHNL_OFFSET */
-enum odm_sec_chnl_offset {
- ODM_DONT_CARE = 0,
- ODM_BELOW = 1,
- ODM_ABOVE = 2
-};
-
-/* ODM_CMNINFO_SEC_MODE */
-enum odm_security {
- ODM_SEC_OPEN = 0,
- ODM_SEC_WEP40 = 1,
- ODM_SEC_TKIP = 2,
- ODM_SEC_RESERVE = 3,
- ODM_SEC_AESCCMP = 4,
- ODM_SEC_WEP104 = 5,
- ODM_WEP_WPA_MIXED = 6, /* WEP + WPA */
- ODM_SEC_SMS4 = 7,
-};
-
/* ODM_CMNINFO_BW */
enum odm_bw {
ODM_BW20M = 0,
ODM_BW40M = 1,
};
-/* ODM_CMNINFO_ONE_PATH_CCA */
-enum odm_cca_path {
- ODM_CCA_2R = 0,
- ODM_CCA_1R_A = 1,
- ODM_CCA_1R_B = 2,
-};
-
struct odm_ra_info {
u8 RateID;
u32 RateMask;
@@ -673,13 +625,6 @@ struct odm_dm_struct {
struct timer_list FastAntTrainingTimer;
}; /* DM_Dynamic_Mechanism_Structure */
-enum ODM_RF_CONTENT {
- odm_radioa_txt = 0x1000,
- odm_radiob_txt = 0x1001,
- odm_radioc_txt = 0x1002,
- odm_radiod_txt = 0x1003
-};
-
enum odm_bb_config_type {
CONFIG_BB_PHY_REG,
CONFIG_BB_AGC_TAB,
@@ -687,38 +632,9 @@ enum odm_bb_config_type {
CONFIG_BB_PHY_REG_PG,
};
-/* Status code */
-enum rt_status {
- RT_STATUS_SUCCESS,
- RT_STATUS_FAILURE,
- RT_STATUS_PENDING,
- RT_STATUS_RESOURCE,
- RT_STATUS_INVALID_CONTEXT,
- RT_STATUS_INVALID_PARAMETER,
- RT_STATUS_NOT_SUPPORT,
- RT_STATUS_OS_API_FAILED,
-};
-
-/* 3=========================================================== */
-/* 3 DIG */
-/* 3=========================================================== */
-
-enum dm_dig_op {
- RT_TYPE_THRESH_HIGH = 0,
- RT_TYPE_THRESH_LOW = 1,
- RT_TYPE_BACKOFF = 2,
- RT_TYPE_RX_GAIN_MIN = 3,
- RT_TYPE_RX_GAIN_MAX = 4,
- RT_TYPE_ENABLE = 5,
- RT_TYPE_DISABLE = 6,
- DIG_OP_TYPE_MAX
-};
-
#define DM_DIG_THRESH_HIGH 40
#define DM_DIG_THRESH_LOW 35
-#define DM_SCAN_RSSI_TH 0x14 /* scan return issue for LC */
-
#define DM_false_ALARM_THRESH_LOW 400
#define DM_false_ALARM_THRESH_HIGH 1000
@@ -726,23 +642,12 @@ enum dm_dig_op {
#define DM_DIG_MIN_NIC 0x1e /* 0x22/0x1c */
#define DM_DIG_MAX_AP 0x32
-#define DM_DIG_MIN_AP 0x20
-
-#define DM_DIG_MAX_NIC_HP 0x46
-#define DM_DIG_MIN_NIC_HP 0x2e
-
-#define DM_DIG_MAX_AP_HP 0x42
-#define DM_DIG_MIN_AP_HP 0x30
/* vivi 92c&92d has different definition, 20110504 */
/* this is for 92c */
#define DM_DIG_FA_TH0 0x200/* 0x20 */
#define DM_DIG_FA_TH1 0x300/* 0x100 */
#define DM_DIG_FA_TH2 0x400/* 0x200 */
-/* this is for 92d */
-#define DM_DIG_FA_TH0_92D 0x100
-#define DM_DIG_FA_TH1_92D 0x400
-#define DM_DIG_FA_TH2_92D 0x600
#define DM_DIG_BACKOFF_MAX 12
#define DM_DIG_BACKOFF_MIN -4
--
2.33.1
next prev parent reply other threads:[~2021-10-19 13:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-19 13:51 [PATCH 0/7] staging: r8188eu: more odm cleanups Michael Straube
2021-10-19 13:51 ` [PATCH 1/7] staging: r8188eu: remove duplicate structure Michael Straube
2021-10-19 13:51 ` [PATCH 2/7] staging: r8188eu: BTRxRSSIPercentage is set but never used Michael Straube
2021-10-19 13:51 ` [PATCH 3/7] staging: r8188eu: rename ODM_PhyStatusQuery_92CSeries() Michael Straube
2021-10-19 13:51 ` [PATCH 4/7] staging: r8188eu: remove unused cases from ODM_CmnInfo{Hook,Update} Michael Straube
2021-10-19 13:51 ` [PATCH 5/7] staging: r8188eu: remove unused fields from enum odm_common_info_def Michael Straube
2021-10-19 13:51 ` Michael Straube [this message]
2021-10-19 13:51 ` [PATCH 7/7] staging: r8188eu: RFType type is always ODM_1T1R Michael Straube
2021-10-19 20:33 ` [PATCH 0/7] staging: r8188eu: more odm cleanups Martin Kaiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211019135137.9893-7-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.