From: "Andreas Schrägle" <linux-lvm@ajs124.de>
To: Adam Puleo <adam.puleo@icloud.com>
Cc: LVM general discussion and development <linux-lvm@redhat.com>
Subject: Re: [linux-lvm] Replace Drive in RAID6
Date: Wed, 3 Nov 2021 15:25:58 +0100 [thread overview]
Message-ID: <20211103152558.7670fa10@desk> (raw)
In-Reply-To: <1495660C-B6EF-4315-8599-F79F7B6CCF73@icloud.com>
On Tue, 2 Nov 2021 22:56:18 -0700
Adam Puleo <adam.puleo@icloud.com> wrote:
> Hello,
>
> One of my drives failed in my RAID6 and I’m trying to replace it without success.
>
> I’m trying to rebuild the failed drive (/dev/sda): lvchange --rebuild /dev/sda vg_data
>
> But I’m receiving the error: vg_data/lv_data must be active to perform this operation.
>
> I have tried to activate the logical volume without success.
>
> How do I go about activating the volume so that I can rebuild the failed drive?
>
> Thanks,
> -Adam
>
> # lvs -a -o name,segtype,devices
> LV Type Devices
> lv_data raid6 lv_data_rimage_0(0),lv_data_rimage_1(0),lv_data_rimage_2(0),lv_data_rimage_3(0),lv_data_rimage_4(0)
> [lv_data_rimage_0] error
> [lv_data_rimage_1] linear /dev/sdc1(1)
> [lv_data_rimage_2] linear /dev/sdb1(1)
> [lv_data_rimage_3] linear /dev/sdf1(1)
> [lv_data_rimage_4] linear /dev/sde1(2)
> [lv_data_rmeta_0] error
> [lv_data_rmeta_1] linear /dev/sdc1(0)
> [lv_data_rmeta_2] linear /dev/sdb1(0)
> [lv_data_rmeta_3] linear /dev/sdf1(0)
> [lv_data_rmeta_4] linear /dev/sde1(0)
>
> # lvs -a
> LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
> lv_data vg_data rwi---r--- 990.00g
> [lv_data_rimage_0] vg_data vwi-a-r-r- 330.00g
> [lv_data_rimage_1] vg_data Iwi-a-r-r- 330.00g
> [lv_data_rimage_2] vg_data Iwi-a-r-r- 330.00g
> [lv_data_rimage_3] vg_data Iwi-a-r-r- 330.00g
> [lv_data_rimage_4] vg_data Iwi-a-r-r- 330.00g
> [lv_data_rmeta_0] vg_data ewi-a-r-r- 4.00m
> [lv_data_rmeta_1] vg_data ewi-a-r-r- 4.00m
> [lv_data_rmeta_2] vg_data ewi-a-r-r- 4.00m
> [lv_data_rmeta_3] vg_data ewi-a-r-r- 4.00m
> [lv_data_rmeta_4] vg_data ewi-a-r-r- 4.00m
>
>
>
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@redhat.com
> https://listman.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Hello Adam,
how exactly have you tried to activate the LV so far?
lvchange with --activationmode degraded should work, no?
Also, are you sure that --rebuild is the correct operation?
man 7 lvmraid suggest you might want --repair or --replace instead.
Best Regards
_______________________________________________
linux-lvm mailing list
linux-lvm@redhat.com
https://listman.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
next prev parent reply other threads:[~2021-11-04 7:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-03 5:56 [linux-lvm] Replace Drive in RAID6 Adam Puleo
2021-11-03 6:41 ` Roberto Fastec
2021-11-03 14:25 ` Andreas Schrägle [this message]
2021-11-05 2:21 ` Adam Puleo
2021-11-08 7:06 ` Adam Puleo
2021-11-16 17:41 ` Heinz Mauelshagen
2021-11-16 17:46 ` Heinz Mauelshagen
2021-11-20 7:15 ` Adam Puleo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211103152558.7670fa10@desk \
--to=linux-lvm@ajs124.de \
--cc=adam.puleo@icloud.com \
--cc=linux-lvm@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.