From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Pali Rohár" <pali@kernel.org>,
"Marek Behún" <marek.behun@nic.cz>
Subject: [PATCH u-boot-marvell 03/11] tools: kwbimage: Set BOOT_FROM by default to SPI
Date: Mon, 8 Nov 2021 18:12:43 +0100 [thread overview]
Message-ID: <20211108171251.25382-4-kabel@kernel.org> (raw)
In-Reply-To: <20211108171251.25382-1-kabel@kernel.org>
From: Pali Rohár <pali@kernel.org>
kwbimage must have valid blockid member instead of zero value. Thus if
config file does not contain BOOT_FROM command, use by default the value
for SPI booting (which is probably the most common).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
tools/kwbimage.c | 32 +++++++++++++++-----------------
1 file changed, 15 insertions(+), 17 deletions(-)
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index d29f2cfcce..38b6e2fed2 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -266,6 +266,18 @@ static bool image_get_spezialized_img(void)
return e->sec_specialized_img;
}
+static int image_get_bootfrom(void)
+{
+ struct image_cfg_element *e;
+
+ e = image_find_option(IMAGE_CFG_BOOT_FROM);
+ if (!e)
+ /* fallback to SPI if no BOOT_FROM is not provided */
+ return IBR_HDR_SPI_ID;
+
+ return e->bootfrom;
+}
+
/*
* Compute a 8-bit checksum of a memory area. This algorithm follows
* the requirements of the Marvell SoC BootROM specifications.
@@ -884,10 +896,8 @@ static void *image_create_v0(size_t *imagesz, struct image_tool_params *params,
main_hdr->version = 0;
main_hdr->destaddr = cpu_to_le32(params->addr);
main_hdr->execaddr = cpu_to_le32(params->ep);
+ main_hdr->blockid = image_get_bootfrom();
- e = image_find_option(IMAGE_CFG_BOOT_FROM);
- if (e)
- main_hdr->blockid = e->bootfrom;
e = image_find_option(IMAGE_CFG_NAND_ECC_MODE);
if (e)
main_hdr->nandeccmode = e->nandeccmode;
@@ -1232,9 +1242,8 @@ static void *image_create_v1(size_t *imagesz, struct image_tool_params *params,
main_hdr->srcaddr = cpu_to_le32(headersz);
main_hdr->ext = hasext;
main_hdr->version = 1;
- e = image_find_option(IMAGE_CFG_BOOT_FROM);
- if (e)
- main_hdr->blockid = e->bootfrom;
+ main_hdr->blockid = image_get_bootfrom();
+
e = image_find_option(IMAGE_CFG_NAND_BLKSZ);
if (e)
main_hdr->nandblocksize = e->nandblksz / (64 * 1024);
@@ -1559,17 +1568,6 @@ static int image_get_version(void)
return e->version;
}
-static int image_get_bootfrom(void)
-{
- struct image_cfg_element *e;
-
- e = image_find_option(IMAGE_CFG_BOOT_FROM);
- if (!e)
- return -1;
-
- return e->bootfrom;
-}
-
static void kwbimage_set_header(void *ptr, struct stat *sbuf, int ifd,
struct image_tool_params *params)
{
--
2.32.0
next prev parent reply other threads:[~2021-11-08 17:13 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-08 17:12 [PATCH u-boot-marvell 00/11] Another kwbimage series Marek Behún
2021-11-08 17:12 ` [PATCH u-boot-marvell 01/11] tools: kwbimage: Add support for new commands UART_PORT and UART_MPP Marek Behún
2021-11-10 8:23 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 02/11] tools: kwbimage: Explicitly set version also for kwbimage v0 Marek Behún
2021-11-10 8:23 ` Stefan Roese
2021-11-08 17:12 ` Marek Behún [this message]
2021-11-10 8:23 ` [PATCH u-boot-marvell 03/11] tools: kwbimage: Set BOOT_FROM by default to SPI Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 04/11] tools: kwbimage: Fix validation of kwbimage v0 Marek Behún
2021-11-10 8:24 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 05/11] tools: kwbimage: Remove unused enums and prototypes Marek Behún
2021-11-10 8:25 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 06/11] tools: kwbimage: Align final UART image to 128 bytes Marek Behún
2021-11-10 8:28 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 07/11] tools: kwbimage: Do not put final image padding to the image data size Marek Behún
2021-11-10 8:28 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 08/11] tools: kwbimage: Align kwbimage header to proper size Marek Behún
2021-11-10 8:28 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 09/11] tools: kwbimage: Fill the real header size into the main header Marek Behún
2021-11-10 8:29 ` Stefan Roese
2021-12-25 17:48 ` Pierre Bourdon
2021-12-25 17:57 ` Pali Rohár
2021-12-25 18:06 ` Pierre Bourdon
2021-12-25 18:10 ` Pali Rohár
2021-12-25 18:18 ` Pierre Bourdon
2021-12-25 19:11 ` Pali Rohár
2021-12-25 19:48 ` Pierre Bourdon
2021-12-25 20:01 ` Pali Rohár
2021-12-25 20:15 ` Pierre Bourdon
2021-12-25 20:42 ` Pali Rohár
2021-11-08 17:12 ` [PATCH u-boot-marvell 10/11] tools: kwbimage: Properly calculate and align kwbimage v0 header size Marek Behún
2021-11-10 8:30 ` Stefan Roese
2021-11-08 17:12 ` [PATCH u-boot-marvell 11/11] tools: kwbimage: Properly set srcaddr in kwbimage v0 Marek Behún
2021-11-10 8:30 ` Stefan Roese
2021-11-10 5:41 ` [PATCH u-boot-marvell 00/11] Another kwbimage series Stefan Roese
2021-11-10 8:19 ` Pali Rohár
2021-11-10 13:52 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211108171251.25382-4-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=marek.behun@nic.cz \
--cc=pali@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.