All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>,
	Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>
Cc: Dom Cobley <dom@raspberrypi.com>,
	Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	dri-devel@lists.freedesktop.org,
	Phil Elwell <phil@raspberrypi.com>
Subject: [PATCH v2 12/13] drm/vc4: hdmi: Leverage new SCDC atomic_check
Date: Thu, 18 Nov 2021 11:38:13 +0100	[thread overview]
Message-ID: <20211118103814.524670-13-maxime@cerno.tech> (raw)
In-Reply-To: <20211118103814.524670-1-maxime@cerno.tech>

Now that we have a generic helper to fill the scrambling status, let's
use it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 46 +++++++++++-----------------------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  6 +++++
 2 files changed, 21 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 5858058165a2..ba939dab35c0 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -99,11 +99,6 @@
 
 #define HDMI_14_MAX_TMDS_CLK   (340 * 1000 * 1000)
 
-static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode)
-{
-	return (mode->clock * 1000) > HDMI_14_MAX_TMDS_CLK;
-}
-
 static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *)m->private;
@@ -296,7 +291,7 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
 		const struct drm_display_mode *mode;
 
 		list_for_each_entry(mode, &connector->probed_modes, head) {
-			if (vc4_hdmi_mode_needs_scrambling(mode)) {
+			if (drm_mode_hdmi_requires_scrambling(mode, 8)) {
 				drm_warn_once(drm, "The core clock cannot reach frequencies high enough to support 4k @ 60Hz.");
 				drm_warn_once(drm, "Please change your config.txt file to add hdmi_enable_4kp60.");
 			}
@@ -314,6 +309,14 @@ static int vc4_hdmi_connector_atomic_check(struct drm_connector *connector,
 	struct drm_connector_state *new_state =
 		drm_atomic_get_new_connector_state(state, connector);
 	struct drm_crtc *crtc = new_state->crtc;
+	int ret;
+
+	ret = drm_atomic_helper_connector_hdmi_check(connector, state);
+	if (ret)
+		return ret;
+
+	if (new_state->hdmi_needs_scrambling != new_state->hdmi_needs_high_tmds_ratio)
+		return -EINVAL;
 
 	if (!crtc)
 		return 0;
@@ -603,37 +606,16 @@ static void vc4_hdmi_set_infoframes(struct drm_encoder *encoder)
 	vc4_hdmi_set_hdr_infoframe(encoder);
 }
 
-static bool vc4_hdmi_supports_scrambling(struct drm_encoder *encoder)
-{
-	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	struct drm_display_info *display = &vc4_hdmi->connector.display_info;
-
-	lockdep_assert_held(&vc4_hdmi->mutex);
-
-	if (!display->is_hdmi)
-		return false;
-
-	if (!display->hdmi.scdc.supported ||
-	    !display->hdmi.scdc.scrambling.supported)
-		return false;
-
-	return true;
-}
-
 #define SCRAMBLING_POLLING_DELAY_MS	1000
 
 static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
 {
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
-	const struct drm_display_mode *mode = &vc4_hdmi->saved_adjusted_mode;
 	unsigned long flags;
 
 	lockdep_assert_held(&vc4_hdmi->mutex);
 
-	if (!vc4_hdmi_supports_scrambling(encoder))
-		return;
-
-	if (!vc4_hdmi_mode_needs_scrambling(mode))
+	if (!vc4_hdmi->scdc_needed)
 		return;
 
 	drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, true);
@@ -1245,6 +1227,7 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
 	struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
 
 	mutex_lock(&vc4_hdmi->mutex);
+	vc4_hdmi->scdc_needed = conn_state->hdmi_needs_scrambling;
 	memcpy(&vc4_hdmi->saved_adjusted_mode,
 	       &crtc_state->adjusted_mode,
 	       sizeof(vc4_hdmi->saved_adjusted_mode));
@@ -1275,7 +1258,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	 * bandwidth). Slightly lower the frequency to bring it out of
 	 * the WiFi range.
 	 */
-	tmds_rate = pixel_rate * 10;
+	tmds_rate = pixel_rate * (conn_state->hdmi_needs_high_tmds_ratio ? 40 : 10);
 	if (vc4_hdmi->disable_wifi_frequencies &&
 	    (tmds_rate >= WIFI_2_4GHz_CH1_MIN_FREQ &&
 	     tmds_rate <= WIFI_2_4GHz_CH1_MAX_FREQ)) {
@@ -1297,7 +1280,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	if (pixel_rate > vc4_hdmi->variant->max_pixel_clock)
 		return -EINVAL;
 
-	if (vc4_hdmi->disable_4kp60 && (pixel_rate > HDMI_14_MAX_TMDS_CLK))
+	if (vc4_hdmi->disable_4kp60 && conn_state->hdmi_needs_scrambling)
 		return -EINVAL;
 
 	vc4_state->pixel_rate = pixel_rate;
@@ -1319,7 +1302,8 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
 	if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock)
 		return MODE_CLOCK_HIGH;
 
-	if (vc4_hdmi->disable_4kp60 && vc4_hdmi_mode_needs_scrambling(mode))
+	if (vc4_hdmi->disable_4kp60 &&
+	    drm_mode_hdmi_requires_scrambling(mode, 8))
 		return MODE_CLOCK_HIGH;
 
 	return MODE_OK;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 4b9175f8aaaf..36f6a208b729 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -206,6 +206,12 @@ struct vc4_hdmi {
 	 * the scrambler on? Protected by @mutex.
 	 */
 	bool scdc_enabled;
+
+	/**
+	 * @scdc_needed: Is the HDMI controller needs to have the
+	 * scrambling on? Protected by @mutex.
+	 */
+	bool scdc_needed;
 };
 
 static inline struct vc4_hdmi *
-- 
2.33.1


  parent reply	other threads:[~2021-11-18 10:38 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-18 10:38 [PATCH v2 00/13] drm: Add generic helpers for HDMI scrambling Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 01/13] drm/connector: Add helper to check if a mode requires scrambling Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 02/13] drm/atomic: Add HDMI scrambler state helper Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 03/13] drm/atomic: Add HDMI reset link helper Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 04/13] drm/scdc: Document hotplug gotchas Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 05/13] drm/vc4: hdmi: Constify drm_display_mode Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 06/13] drm/vc4: hdmi: Remove unused argument in vc4_hdmi_supports_scrambling Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 07/13] drm/vc4: hdmi: Remove mutex in detect Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 08/13] drm/vc4: hdmi: Remove HDMI flag from encoder Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 09/13] drm/vc4: hdmi: Simplify the hotplug handling Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 10/13] drm/vc4: hdmi: Simplify the connector state retrieval Maxime Ripard
2021-11-18 10:38 ` [PATCH v2 11/13] drm/vc4: hdmi: Switch to detect_ctx Maxime Ripard
2021-11-18 10:38 ` Maxime Ripard [this message]
2021-11-18 10:38 ` [PATCH v2 13/13] drm/vc4: hdmi: Reset link on hotplug Maxime Ripard
2021-11-19 16:01 ` [PATCH v2 00/13] drm: Add generic helpers for HDMI scrambling Daniel Vetter
2021-11-26 15:43   ` Maxime Ripard
2021-11-26 17:12     ` Daniel Vetter
2021-11-29 10:07       ` Maxime Ripard
2021-11-30  8:29         ` Daniel Vetter
2021-11-30  9:00           ` Maxime Ripard
2021-12-15 13:51           ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211118103814.524670-13-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dom@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.