From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: m.szyprowski@samsung.com, <stern@rowland.harvard.edu>,
kishon@ti.com, hdegoede@redhat.com, chris.chiu@canonical.com,
linux-usb@vger.kernel.org,
Mathias Nyman <mathias.nyman@linux.intel.com>,
stable@vger.kernel.org
Subject: [PATCH] usb: hub: Fix locking issues with address0_mutex
Date: Tue, 23 Nov 2021 12:16:56 +0200 [thread overview]
Message-ID: <20211123101656.1113518-1-mathias.nyman@linux.intel.com> (raw)
Fix the circular lock dependency and unbalanced unlock of addess0_mutex
introduced when fixing an address0_mutex enumeration retry race in commit
ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Make sure locking order between port_dev->status_lock and address0_mutex
is correct, and that address0_mutex is not unlocked in hub_port_connect
"done:" codepath which may be reached without locking address0_mutex
Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race")
Cc: <stable@vger.kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/core/hub.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 9f0d1af8be6f..e907dfa0ca6d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5190,6 +5190,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *udev = port_dev->child;
static int unreliable_port = -1;
+ bool retry_locked;
/* Disconnect any existing devices under this port */
if (udev) {
@@ -5246,10 +5247,10 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
status = 0;
- mutex_lock(hcd->address0_mutex);
-
for (i = 0; i < PORT_INIT_TRIES; i++) {
-
+ usb_lock_port(port_dev);
+ mutex_lock(hcd->address0_mutex);
+ retry_locked = true;
/* reallocate for each attempt, since references
* to the previous one can escape in various ways
*/
@@ -5257,6 +5258,8 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
if (!udev) {
dev_err(&port_dev->dev,
"couldn't allocate usb_device\n");
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
goto done;
}
@@ -5278,13 +5281,13 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
}
/* reset (non-USB 3.0 devices) and get descriptor */
- usb_lock_port(port_dev);
status = hub_port_init(hub, udev, port1, i);
- usb_unlock_port(port_dev);
if (status < 0)
goto loop;
mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ retry_locked = false;
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(2000);
@@ -5374,11 +5377,14 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
loop_disable:
hub_port_disable(hub, port1, 1);
- mutex_lock(hcd->address0_mutex);
loop:
usb_ep0_reinit(udev);
release_devnum(udev);
hub_free_dev(udev);
+ if (retry_locked) {
+ mutex_unlock(hcd->address0_mutex);
+ usb_unlock_port(port_dev);
+ }
usb_put_dev(udev);
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
@@ -5401,8 +5407,6 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
}
done:
- mutex_unlock(hcd->address0_mutex);
-
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent) {
if (status != -ENOTCONN && status != -ENODEV)
--
2.25.1
next reply other threads:[~2021-11-23 10:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-23 10:16 Mathias Nyman [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-11-23 19:56 [PATCH] usb: hub: Fix locking issues with address0_mutex kernel test robot
2021-12-30 6:33 kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211123101656.1113518-1-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=chris.chiu@canonical.com \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=kishon@ti.com \
--cc=linux-usb@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.