From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Aleksander Morgado <aleksander@aleksander.es>
Cc: mhi@lists.linux.dev, Loic Poulain <loic.poulain@linaro.org>,
Thomas Perrot <thomas.perrot@bootlin.com>,
Hemant Kumar <hemantk@codeaurora.org>,
Bhaumik Bhatt <bbhatt@codeaurora.org>,
quic_jhugo@quicinc.com,
linux-arm-msm <linux-arm-msm@vger.kernel.org>,
stable <stable@vger.kernel.org>
Subject: Re: [PATCH v4] bus: mhi: Fix race while handling SYS_ERR at power up
Date: Thu, 25 Nov 2021 10:50:38 +0530 [thread overview]
Message-ID: <20211125052038.GA7290@thinkpad> (raw)
In-Reply-To: <CAAP7ucKnOEpt3_tj3+-A12+m2DPmfBO46wLs1F9gszQ95aUHdw@mail.gmail.com>
On Wed, Nov 24, 2021 at 04:17:40PM +0100, Aleksander Morgado wrote:
> Hey Mani,
>
> On Wed, Nov 24, 2021 at 2:22 PM Manivannan Sadhasivam
> <manivannan.sadhasivam@linaro.org> wrote:
> >
> > Some devices tend to trigger SYS_ERR interrupt while the host handling
> > SYS_ERR state of the device during power up. This creates a race
> > condition and causes a failure in booting up the device.
> >
> > The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR
> > handling in mhi_async_power_up(). Once the host detects that the device
> > is in SYS_ERR state, it issues MHI_RESET and waits for the device to
> > process the reset request. During this time, the device triggers SYS_ERR
> > interrupt to the host and host starts handling SYS_ERR execution.
> >
> > So by the time the device has completed reset, host starts SYS_ERR
> > handling. This causes the race condition and the modem fails to boot.
> >
> > Hence, register the IRQ handler only after handling the SYS_ERR check
> > to avoid getting spurious IRQs from the device.
> >
> > Cc: stable@vger.kernel.org
> > Fixes: e18d4e9fa79b ("bus: mhi: core: Handle syserr during power_up")
> > Reported-by: Aleksander Morgado <aleksander@aleksander.es>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >
> > Changes in v4:
> >
> > * Reverted the change that moved BHI_INTVEC as that was causing issue as
> > reported by Aleksander.
> >
> > Changes in v3:
> >
> > * Moved BHI_INTVEC setup after irq setup
> > * Used interval_us as the delay for the polling API
> >
> > Changes in v2:
> >
> > * Switched to "mhi_poll_reg_field" for detecting MHI reset in device.
> >
>
> So far so good, works without issues in both reboots and cold boots.
> Thanks!
>
Thanks a lot for testing! I'll add your tested-by tag while applying.
Regards,
Mani
> Posting here an example log for reference:
>
> root@OpenWrt:~# dmesg | grep mhi
> [ 7.022756] mhi-pci-generic 0000:01:00.0: MHI PCI device found: sierra-em919x
> [ 7.029931] mhi-pci-generic 0000:01:00.0: BAR 0: assigned [mem
> 0x600000000-0x600000fff 64bit]
> [ 7.038495] mhi-pci-generic 0000:01:00.0: enabling device (0000 -> 0002)
> [ 7.045311] mhi-pci-generic 0000:01:00.0: using shared MSI
> [ 7.051420] mhi mhi0: Requested to power ON
> [ 7.055637] mhi mhi0: Attempting power on with EE: PASS THROUGH,
> state: SYS ERROR
> [ 7.176024] mhi mhi0: Power on setup success
> [ 7.176082] mhi mhi0: Handling state transition: PBL
> [ 7.180322] mhi mhi0: local ee: INVALID_EE state: RESET device ee:
> MISSION MODE state: READY
> [ 7.193852] mhi mhi0: Device in READY State
> [ 7.198043] mhi mhi0: Initializing MHI registers
> [ 7.202712] mhi mhi0: Wait for device to enter SBL or Mission mode
> [ 15.351002] mhi mhi0: local ee: MISSION MODE state: READY device
> ee: MISSION MODE state: READY
> [ 15.509984] mhi mhi0: State change event to state: M0
> [ 15.510001] mhi mhi0: local ee: MISSION MODE state: READY device
> ee: MISSION MODE state: M0
> [ 15.523459] mhi mhi0: Received EE event: MISSION MODE
> [ 15.523463] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 15.536629] mhi mhi0: Handling state transition: MISSION MODE
> [ 15.542393] mhi mhi0: Processing Mission Mode transition
> [ 15.549246] mhi_net mhi0_IP_HW0: 100: Updating channel state to: START
> [ 15.647776] mhi_net mhi0_IP_HW0: 100: Channel state change to START
> successful
> [ 15.647795] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 15.663196] mhi_net mhi0_IP_HW0: 101: Updating channel state to: START
> [ 15.719309] mhi_net mhi0_IP_HW0: 101: Channel state change to START
> successful
> [ 15.719314] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 17.851014] mhi mhi0: Allowing M3 transition
> [ 17.855347] mhi mhi0: Waiting for M3 completion
> [ 17.987550] mhi mhi0: State change event to state: M3
> [ 17.987568] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M3
> [ 21.851920] mhi_wwan_ctrl mhi0_DUN: 32: Updating channel state to: START
> [ 21.876065] mhi mhi0: Entered with PM state: M3, MHI state: M3
> [ 21.900513] mhi mhi0: State change event to state: M0
> [ 21.900538] mhi mhi0: local ee: MISSION MODE state: M3 device ee:
> MISSION MODE state: M0
> [ 21.921710] mhi_wwan_ctrl mhi0_DUN: 32: Channel state change to
> START successful
> [ 21.921713] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 21.937308] mhi_wwan_ctrl mhi0_DUN: 33: Updating channel state to: START
> [ 21.946170] mhi_wwan_ctrl mhi0_DUN: 33: Channel state change to
> START successful
> [ 21.946172] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 21.981308] mhi_wwan_ctrl mhi0_DIAG: 4: Updating channel state to: START
> [ 21.990184] mhi_wwan_ctrl mhi0_DIAG: 4: Channel state change to
> START successful
> [ 21.990186] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 22.005697] mhi_wwan_ctrl mhi0_DIAG: 5: Updating channel state to: START
> [ 22.014547] mhi_wwan_ctrl mhi0_DIAG: 5: Channel state change to
> START successful
> [ 22.014549] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 22.043376] mhi_wwan_ctrl mhi0_DIAG: mhi_ul_xfer_cb: status: 0 xfer_len: 5
> [ 22.043380] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 22.050277] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 22.058371] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: 0
> receive_len: 58
> [ 22.073988] mhi_wwan_ctrl mhi0_DIAG: 5: Updating channel state to: RESET
> [ 22.082292] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 22.082294] mhi_wwan_ctrl mhi0_DIAG: 5: Channel state change to
> RESET successful
> [ 22.097778] mhi mhi0: Marking all events for chan: 5 as stale
> [ 22.103523] mhi mhi0: Finished marking events as stale events
> [ 22.109271] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.116676] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.124076] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.131476] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.138874] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.146274] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.153672] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.161071] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.168470] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.175870] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.183268] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.190666] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.198065] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.205463] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.212862] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.220260] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.227660] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.235059] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.242457] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.249855] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.257253] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.264651] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.272049] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.279448] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.286846] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.294245] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.301643] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.309041] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.316440] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.323838] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.331237] mhi_wwan_ctrl mhi0_DIAG: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 22.338666] mhi_wwan_ctrl mhi0_DIAG: 5: successfully reset
> [ 22.344157] mhi_wwan_ctrl mhi0_DIAG: 4: Updating channel state to: RESET
> [ 22.352753] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 22.352758] mhi_wwan_ctrl mhi0_DIAG: 4: Channel state change to
> RESET successful
> [ 22.368356] mhi mhi0: Marking all events for chan: 4 as stale
> [ 22.374106] mhi mhi0: Finished marking events as stale events
> [ 22.379910] mhi_wwan_ctrl mhi0_DIAG: 4: successfully reset
> [ 22.388072] mhi_wwan_ctrl mhi0_QMI: 14: Updating channel state to: START
> [ 22.397188] mhi_wwan_ctrl mhi0_QMI: 14: Channel state change to
> START successful
> [ 22.397190] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 22.412690] mhi_wwan_ctrl mhi0_QMI: 15: Updating channel state to: START
> [ 22.424017] mhi_wwan_ctrl mhi0_QMI: 15: Channel state change to
> START successful
> [ 22.424021] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 25.917106] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 4
> [ 25.917125] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 25.935842] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 4
> [ 25.935852] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 25.942645] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 3
> [ 25.950734] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 25.957768] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 6
> [ 25.972897] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 3
> [ 25.979950] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 6
> [ 25.979953] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 25.995084] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 9
> [ 25.995269] mhi_wwan_ctrl mhi0_DUN: 33: Updating channel state to: RESET
> [ 26.001872] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 8
> [ 26.001879] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 39
> [ 26.024415] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 26.024418] mhi_wwan_ctrl mhi0_DUN: 33: Channel state change to
> RESET successful
> [ 26.039893] mhi mhi0: Marking all events for chan: 33 as stale
> [ 26.045723] mhi mhi0: Finished marking events as stale events
> [ 26.051468] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.058780] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.066092] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.073404] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.080715] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.088027] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.095337] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.102650] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.109965] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.117279] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.124589] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.131900] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.139211] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.146521] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.153831] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.161142] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.168452] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.175763] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.183073] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.190385] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.197695] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.205006] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.212315] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.219627] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.226937] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.234248] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.241558] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.248869] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 26.256206] mhi_wwan_ctrl mhi0_DUN: 33: successfully reset
> [ 26.261695] mhi_wwan_ctrl mhi0_DUN: 32: Updating channel state to: RESET
> [ 26.270660] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 26.270669] mhi_wwan_ctrl mhi0_DUN: 32: Channel state change to
> RESET successful
> [ 26.286159] mhi mhi0: Marking all events for chan: 32 as stale
> [ 26.291992] mhi mhi0: Finished marking events as stale events
> [ 26.297761] mhi_wwan_ctrl mhi0_DUN: 32: successfully reset
> [ 30.355529] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 30.355543] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 30.362450] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 30.370546] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 30.377411] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 12
> [ 30.392643] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 30.399531] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 30.406757] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 30.413636] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 30.420863] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 30.427754] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 30.434992] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 30.441882] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 30.449115] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 30.456012] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 30.463268] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 30.470516] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 30.479754] mhi_wwan_ctrl mhi0_QMI: 15: Updating channel state to: RESET
> [ 30.489207] mhi_wwan_ctrl mhi0_QMI: 15: Channel state change to
> RESET successful
> [ 30.489210] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 30.504704] mhi mhi0: Marking all events for chan: 15 as stale
> [ 30.510536] mhi mhi0: Finished marking events as stale events
> [ 30.516284] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.523598] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.530911] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.538224] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.545535] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.552847] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.560157] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.567468] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.574779] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.582091] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.589402] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.596713] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.604024] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.611335] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.618645] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.625957] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.633291] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.640618] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.647946] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.655297] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.662627] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.669949] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.677262] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.684572] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.691888] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.699199] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.706509] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.713820] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.721131] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.728441] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.735752] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: -107
> receive_len: 0
> [ 30.743092] mhi_wwan_ctrl mhi0_QMI: 15: successfully reset
> [ 30.748605] mhi_wwan_ctrl mhi0_QMI: 14: Updating channel state to: RESET
> [ 30.761269] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 30.769375] mhi_wwan_ctrl mhi0_QMI: 14: Channel state change to
> RESET successful
> [ 30.776780] mhi mhi0: Marking all events for chan: 14 as stale
> [ 30.782613] mhi mhi0: Finished marking events as stale events
> [ 30.788371] mhi_wwan_ctrl mhi0_QMI: 14: successfully reset
> [ 30.794771] mhi_wwan_ctrl mhi0_QMI: 14: Updating channel state to: START
> [ 30.803532] mhi_wwan_ctrl mhi0_QMI: 14: Channel state change to
> START successful
> [ 30.803535] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 30.819038] mhi_wwan_ctrl mhi0_QMI: 15: Updating channel state to: START
> [ 30.828331] mhi_wwan_ctrl mhi0_QMI: 15: Channel state change to
> START successful
> [ 30.828333] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 31.925717] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 12
> [ 31.925723] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 31.932639] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 31.940747] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 12
> [ 31.955964] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 228
> [ 31.978521] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 31.978523] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 31.985418] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 31.993503] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.012893] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.012897] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.019777] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 77
> [ 32.027861] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.054892] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.054894] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.061787] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.069867] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 17
> [ 32.084825] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.091966] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.123615] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.123618] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.130510] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.138594] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.168928] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.168935] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.183929] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.183937] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.203362] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.203363] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.210246] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.218328] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.236614] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.236616] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.243512] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.251618] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.269860] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.269862] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.276745] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.284834] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.304246] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.304247] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.311135] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.319241] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.339188] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 16
> [ 32.339193] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.346078] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.354158] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.369801] mhi_wwan_ctrl mhi0_DUN: 32: Updating channel state to: START
> [ 32.379359] mhi_wwan_ctrl mhi0_DUN: 32: Channel state change to
> START successful
> [ 32.379361] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.394877] mhi_wwan_ctrl mhi0_DUN: 33: Updating channel state to: START
> [ 32.404051] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.404052] mhi_wwan_ctrl mhi0_DUN: 33: Channel state change to
> START successful
> [ 32.423401] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 6
> [ 32.423403] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.430201] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.438282] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.453242] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 294
> [ 32.460474] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 5
> [ 32.467535] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 6
> [ 32.467538] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.482675] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.489557] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.489560] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 26
> [ 32.489567] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 6
> [ 32.504790] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.511569] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 6
> [ 32.526694] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.533572] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 197
> [ 32.533574] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.548873] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 11
> [ 32.555749] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 6
> [ 32.555752] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.562793] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.577748] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.577750] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 52
> [ 32.577755] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 6
> [ 32.592974] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.599753] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 9
> [ 32.614877] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.621756] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.621758] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 29
> [ 32.621765] mhi_wwan_ctrl mhi0_DUN: mhi_ul_xfer_cb: status: 0 xfer_len: 7
> [ 32.629862] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.636985] mhi_wwan_ctrl mhi0_DUN: mhi_dl_xfer_cb: status: 0 receive_len: 9
> [ 32.643764] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.651846] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.673835] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 77
> [ 32.684996] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 27
> [ 32.684998] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.691894] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.699994] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 20
> [ 32.715206] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 29
> [ 32.726784] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.726788] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.733667] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 26
> [ 32.741756] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.759982] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.759985] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.766864] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 42
> [ 32.774951] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.794333] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.794337] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.801215] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 145
> [ 32.809294] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.828654] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.828657] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.835554] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.843638] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 24
> [ 32.862183] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 20
> [ 32.862186] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.869074] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.877162] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 27
> [ 32.896556] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.896558] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.903446] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.911532] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 12
> [ 32.926749] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 116
> [ 32.938214] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.938223] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.945134] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0
> receive_len: 116
> [ 32.953218] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.972615] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 32.972619] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 32.979497] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 20
> [ 32.987579] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 33.005791] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 33.005793] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 33.012673] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 33.020759] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 90
> [ 35.011999] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 35.012012] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 35.018924] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 90
> [ 35.027016] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 35.034131] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 12
> [ 37.011548] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 37.011554] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 37.018476] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 37.026567] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 90
> [ 39.012483] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 39.012497] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 39.019413] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 90
> [ 39.027510] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 39.034617] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 12
> [ 41.010833] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 41.010839] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 41.017760] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 41.025856] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 90
> [ 43.010424] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 43.010431] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 43.017356] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 43.025455] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 90
> [ 45.009911] mhi_wwan_ctrl mhi0_QMI: mhi_ul_xfer_cb: status: 0 xfer_len: 13
> [ 45.009918] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 45.016839] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
> [ 45.024933] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 90
> [ 47.523933] mhi mhi0: Allowing M3 transition
> [ 47.528247] mhi mhi0: Waiting for M3 completion
> [ 47.569544] mhi mhi0: State change event to state: M3
> [ 47.569567] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M3
> [ 48.632075] mhi mhi0: Entered with PM state: M3, MHI state: M3
> [ 48.650239] mhi mhi0: State change event to state: M0
> [ 48.650247] mhi mhi0: local ee: MISSION MODE state: M3 device ee:
> MISSION MODE state: M0
> [ 48.667040] mhi_wwan_ctrl mhi0_QMI: mhi_dl_xfer_cb: status: 0 receive_len: 12
> [ 48.667043] mhi mhi0: local ee: MISSION MODE state: M0 device ee:
> MISSION MODE state: M0
>
>
>
>
> --
> Aleksander
> https://aleksander.es
next prev parent reply other threads:[~2021-11-25 5:24 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-24 13:22 [PATCH v4] bus: mhi: Fix race while handling SYS_ERR at power up Manivannan Sadhasivam
2021-11-24 15:17 ` Aleksander Morgado
2021-11-25 5:20 ` Manivannan Sadhasivam [this message]
2021-11-25 9:20 ` Thomas Perrot
2021-11-26 2:58 ` Manivannan Sadhasivam
2021-11-26 3:01 ` Manivannan Sadhasivam
2021-11-30 0:54 ` Bhaumik Bhatt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211125052038.GA7290@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=aleksander@aleksander.es \
--cc=bbhatt@codeaurora.org \
--cc=hemantk@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=mhi@lists.linux.dev \
--cc=quic_jhugo@quicinc.com \
--cc=stable@vger.kernel.org \
--cc=thomas.perrot@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.