[PATCH 4.19 22/69] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Pali Rohár <pali@kernel.org>

commit 96be36dbffacea0aa9e6ec4839583e79faa141a1 upstream.

PCI-E capability macros are already defined in linux/pci_regs.h.
Remove their reimplementation in pcie-aardvark.

Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/controller/pci-aardvark.c |   42 +++++++++++++++-------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -28,17 +28,7 @@
 #define     PCIE_CORE_CMD_IO_ACCESS_EN				BIT(0)
 #define     PCIE_CORE_CMD_MEM_ACCESS_EN				BIT(1)
 #define     PCIE_CORE_CMD_MEM_IO_REQ_EN				BIT(2)
-#define PCIE_CORE_DEV_CTRL_STATS_REG				0xc8
-#define     PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE	(0 << 4)
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT	5
-#define     PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE		(0 << 11)
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT	12
-#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ		0x2
-#define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
-#define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
-#define     PCIE_CORE_LINK_TRAINING				BIT(5)
-#define     PCIE_CORE_LINK_SPEED_SHIFT				16
-#define     PCIE_CORE_LINK_WIDTH_SHIFT				20
+#define PCIE_CORE_PCIEXP_CAP					0xc0
 #define PCIE_CORE_ERR_CAPCTL_REG				0x118
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
 #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN			BIT(6)
@@ -210,6 +200,11 @@ static inline u32 advk_readl(struct advk
 	return readl(pcie->base + reg);
 }
 
+static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
+{
+	return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
+}
+
 static int advk_pcie_link_up(struct advk_pcie *pcie)
 {
 	u32 val, ltssm_state;
@@ -262,16 +257,16 @@ static int advk_pcie_train_at_gen(struct
 	 * Start link training immediately after enabling it.
 	 * This solves problems for some buggy cards.
 	 */
-	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-	reg |= PCIE_CORE_LINK_TRAINING;
-	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
+	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
+	reg |= PCI_EXP_LNKCTL_RL;
+	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
 
 	ret = advk_pcie_wait_for_link(pcie);
 	if (ret)
 		return ret;
 
-	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
-	neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
+	reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
+	neg_gen = reg & PCI_EXP_LNKSTA_CLS;
 
 	return neg_gen;
 }
@@ -356,13 +351,14 @@ static void advk_pcie_setup_hw(struct ad
 		PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
 	advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
 
-	/* Set PCIe Device Control and Status 1 PF0 register */
-	reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
-		(7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
-		PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
-		(PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
-		 PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
-	advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+	/* Set PCIe Device Control register */
+	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
+	reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
+	reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
+	reg &= ~PCI_EXP_DEVCTL_READRQ;
+	reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
+	reg |= PCI_EXP_DEVCTL_READRQ_512B;
+	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
 
 	/* Program PCIe Control 2 to disable strict ordering */
 	reg = PCIE_CORE_CTRL2_RESERVED |