All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v6 05/18] powerpc/pseries: move process table registration away from hash-specific code
Date: Thu,  2 Dec 2021 00:41:40 +1000	[thread overview]
Message-ID: <20211201144153.2456614-6-npiggin@gmail.com> (raw)
In-Reply-To: <20211201144153.2456614-1-npiggin@gmail.com>

This reduces ifdefs in a later change which makes hash support configurable.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/platforms/pseries/lpar.c | 56 +++++++++++++--------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 3df6bdfea475..06d6a824c0dc 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -712,6 +712,34 @@ void vpa_init(int cpu)
 
 #ifdef CONFIG_PPC_BOOK3S_64
 
+static int pseries_lpar_register_process_table(unsigned long base,
+			unsigned long page_size, unsigned long table_size)
+{
+	long rc;
+	unsigned long flags = 0;
+
+	if (table_size)
+		flags |= PROC_TABLE_NEW;
+	if (radix_enabled()) {
+		flags |= PROC_TABLE_RADIX;
+		if (mmu_has_feature(MMU_FTR_GTSE))
+			flags |= PROC_TABLE_GTSE;
+	} else
+		flags |= PROC_TABLE_HPT_SLB;
+	for (;;) {
+		rc = plpar_hcall_norets(H_REGISTER_PROC_TBL, flags, base,
+					page_size, table_size);
+		if (!H_IS_LONG_BUSY(rc))
+			break;
+		mdelay(get_longbusy_msecs(rc));
+	}
+	if (rc != H_SUCCESS) {
+		pr_err("Failed to register process table (rc=%ld)\n", rc);
+		BUG();
+	}
+	return rc;
+}
+
 static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 				     unsigned long vpn, unsigned long pa,
 				     unsigned long rflags, unsigned long vflags,
@@ -1680,34 +1708,6 @@ static int pseries_lpar_resize_hpt(unsigned long shift)
 	return 0;
 }
 
-static int pseries_lpar_register_process_table(unsigned long base,
-			unsigned long page_size, unsigned long table_size)
-{
-	long rc;
-	unsigned long flags = 0;
-
-	if (table_size)
-		flags |= PROC_TABLE_NEW;
-	if (radix_enabled()) {
-		flags |= PROC_TABLE_RADIX;
-		if (mmu_has_feature(MMU_FTR_GTSE))
-			flags |= PROC_TABLE_GTSE;
-	} else
-		flags |= PROC_TABLE_HPT_SLB;
-	for (;;) {
-		rc = plpar_hcall_norets(H_REGISTER_PROC_TBL, flags, base,
-					page_size, table_size);
-		if (!H_IS_LONG_BUSY(rc))
-			break;
-		mdelay(get_longbusy_msecs(rc));
-	}
-	if (rc != H_SUCCESS) {
-		pr_err("Failed to register process table (rc=%ld)\n", rc);
-		BUG();
-	}
-	return rc;
-}
-
 void __init hpte_init_pseries(void)
 {
 	mmu_hash_ops.hpte_invalidate	 = pSeries_lpar_hpte_invalidate;
-- 
2.23.0


  parent reply	other threads:[~2021-12-01 14:46 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-01 14:41 [PATCH v6 00/18] powerpc: Make hash MMU code build configurable Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 01/18] powerpc: Remove unused FW_FEATURE_NATIVE references Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 02/18] powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 03/18] powerpc/pseries: Stop selecting PPC_HASH_MMU_NATIVE Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 04/18] powerpc/64s: Move and rename do_bad_slb_fault as it is not hash specific Nicholas Piggin
2021-12-01 14:41 ` Nicholas Piggin [this message]
2021-12-01 14:41 ` [PATCH v6 06/18] powerpc/pseries: lparcfg don't include slb_size line in radix mode Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 07/18] powerpc/64s: move THP trace point creation out of hash specific file Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 08/18] powerpc/64s: Make flush_and_reload_slb a no-op when radix is enabled Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 09/18] powerpc/64s: move page size definitions from hash specific file Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 10/18] powerpc/64s: Rename hash_hugetlbpage.c to hugetlbpage.c Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 11/18] powerpc/64: pcpu setup avoid reading mmu_linear_psize on 64e or radix Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 12/18] powerpc: make memremap_compat_align 64s-only Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 13/18] powerpc/64e: remove mmu_linear_psize Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 14/18] powerpc/64s: Fix radix MMU when MMU_FTR_HPTE_TABLE is clear Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 15/18] powerpc/64s: Always define arch unmapped area calls Nicholas Piggin
2021-12-08  9:38   ` Christophe Leroy
2021-12-09  8:25     ` Nicholas Piggin
2021-12-09  8:28       ` Christophe Leroy
2021-12-09  9:30       ` Nicholas Piggin
2021-12-08 10:00   ` Christophe Leroy
2021-12-09  8:29     ` Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 16/18] powerpc/64s: Make hash MMU support configurable Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 17/18] powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU Nicholas Piggin
2021-12-02 13:30   ` Fabiano Rosas
2021-12-03 12:34   ` Michael Ellerman
2021-12-07 12:58   ` Michael Ellerman
2021-12-07 13:00   ` Michael Ellerman
2021-12-09  8:30     ` Nicholas Piggin
2021-12-01 14:41 ` [PATCH v6 18/18] powerpc/microwatt: add POWER9_CPU, clear PPC_64S_HASH_MMU Nicholas Piggin
2021-12-15  0:24 ` [PATCH v6 00/18] powerpc: Make hash MMU code build configurable Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211201144153.2456614-6-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.