From: Ard Biesheuvel <ardb@kernel.org>
To: linux-arm-kernel@lists.infradead.org, linux@armlinux.org.uk
Cc: Ard Biesheuvel <ardb@kernel.org>,
Nicolas Pitre <nico@fluxnic.net>, Arnd Bergmann <arnd@arndb.de>,
Kees Cook <keescook@chromium.org>,
Keith Packard <keithpac@amazon.com>,
Linus Walleij <linus.walleij@linaro.org>,
Nick Desaulniers <ndesaulniers@google.com>,
Tony Lindgren <tony@atomide.com>, Marc Zyngier <maz@kernel.org>,
Vladimir Murzin <vladimir.murzin@arm.com>,
Jesse Taube <mr.bossman075@gmail.com>
Subject: [PATCH v3 02/14] ARM: footbridge: use GENERIC_IRQ_MULTI_HANDLER
Date: Fri, 3 Dec 2021 11:08:51 +0100 [thread overview]
Message-ID: <20211203100903.334206-3-ardb@kernel.org> (raw)
In-Reply-To: <20211203100903.334206-1-ardb@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
Footbridge still uses the classic IRQ entry path in assembler,
but this is easily converted into an equivalent C version.
In this case, the correlation between IRQ numbers and bits in
the status register is non-obvious, and the priorities are
handled by manually checking each bit in a static order,
re-reading the status register after each handled event.
I moved the code into the new file and edited the syntax without
changing this sequence to keep the behavior as close as possible
to what it traditionally did.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
arch/arm/Kconfig | 1 +
| 87 ++++++++++++++++
| 107 --------------------
3 files changed, 88 insertions(+), 107 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 25f1868e5703..a0cc9ca66ae0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -362,6 +362,7 @@ config ARCH_FOOTBRIDGE
select FOOTBRIDGE
select NEED_MACH_IO_H if !MMU
select NEED_MACH_MEMORY_H
+ select GENERIC_IRQ_MULTI_HANDLER
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
--git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eee095f0e2f6..322495df271d 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -27,6 +27,91 @@
#include "common.h"
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+static int dc21285_get_irq(void)
+{
+ void __iomem *irqstatus = (void __iomem *)CSR_IRQ_STATUS;
+ u32 mask = readl(irqstatus);
+
+ if (mask & IRQ_MASK_SDRAMPARITY)
+ return IRQ_SDRAMPARITY;
+
+ if (mask & IRQ_MASK_UART_RX)
+ return IRQ_CONRX;
+
+ if (mask & IRQ_MASK_DMA1)
+ return IRQ_DMA1;
+
+ if (mask & IRQ_MASK_DMA2)
+ return IRQ_DMA2;
+
+ if (mask & IRQ_MASK_IN0)
+ return IRQ_IN0;
+
+ if (mask & IRQ_MASK_IN1)
+ return IRQ_IN1;
+
+ if (mask & IRQ_MASK_IN2)
+ return IRQ_IN2;
+
+ if (mask & IRQ_MASK_IN3)
+ return IRQ_IN3;
+
+ if (mask & IRQ_MASK_PCI)
+ return IRQ_PCI;
+
+ if (mask & IRQ_MASK_DOORBELLHOST)
+ return IRQ_DOORBELLHOST;
+
+ if (mask & IRQ_MASK_I2OINPOST)
+ return IRQ_I2OINPOST;
+
+ if (mask & IRQ_MASK_TIMER1)
+ return IRQ_TIMER1;
+
+ if (mask & IRQ_MASK_TIMER2)
+ return IRQ_TIMER2;
+
+ if (mask & IRQ_MASK_TIMER3)
+ return IRQ_TIMER3;
+
+ if (mask & IRQ_MASK_UART_TX)
+ return IRQ_CONTX;
+
+ if (mask & IRQ_MASK_PCI_ABORT)
+ return IRQ_PCI_ABORT;
+
+ if (mask & IRQ_MASK_PCI_SERR)
+ return IRQ_PCI_SERR;
+
+ if (mask & IRQ_MASK_DISCARD_TIMER)
+ return IRQ_DISCARD_TIMER;
+
+ if (mask & IRQ_MASK_PCI_DPERR)
+ return IRQ_PCI_DPERR;
+
+ if (mask & IRQ_MASK_PCI_PERR)
+ return IRQ_PCI_PERR;
+
+ return 0;
+}
+
+static void dc21285_handle_irq(struct pt_regs *regs)
+{
+ int irq;
+ do {
+ irq = dc21285_get_irq();
+ if (!irq)
+ break;
+
+ generic_handle_irq(irq);
+ } while (1);
+}
+
+
unsigned int mem_fclk_21285 = 50000000;
EXPORT_SYMBOL(mem_fclk_21285);
@@ -108,6 +193,8 @@ static void __init __fb_init_irq(void)
void __init footbridge_init_irq(void)
{
+ set_handle_irq(dc21285_handle_irq);
+
__fb_init_irq();
if (!footbridge_cfn_mode())
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
deleted file mode 100644
index dabbd5c54a78..000000000000
--- a/arch/arm/mach-footbridge/include/mach/entry-macro.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/hardware/dec21285.h>
-
- .equ dc21285_high, ARMCSR_BASE & 0xff000000
- .equ dc21285_low, ARMCSR_BASE & 0x00ffffff
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #dc21285_high
- .if dc21285_low
- orr \base, \base, #dc21285_low
- .endif
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #0x180] @ get interrupts
-
- mov \irqnr, #IRQ_SDRAMPARITY
- tst \irqstat, #IRQ_MASK_SDRAMPARITY
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_UART_RX
- movne \irqnr, #IRQ_CONRX
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DMA1
- movne \irqnr, #IRQ_DMA1
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DMA2
- movne \irqnr, #IRQ_DMA2
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN0
- movne \irqnr, #IRQ_IN0
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN1
- movne \irqnr, #IRQ_IN1
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN2
- movne \irqnr, #IRQ_IN2
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_IN3
- movne \irqnr, #IRQ_IN3
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI
- movne \irqnr, #IRQ_PCI
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DOORBELLHOST
- movne \irqnr, #IRQ_DOORBELLHOST
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_I2OINPOST
- movne \irqnr, #IRQ_I2OINPOST
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_TIMER1
- movne \irqnr, #IRQ_TIMER1
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_TIMER2
- movne \irqnr, #IRQ_TIMER2
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_TIMER3
- movne \irqnr, #IRQ_TIMER3
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_UART_TX
- movne \irqnr, #IRQ_CONTX
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_ABORT
- movne \irqnr, #IRQ_PCI_ABORT
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_SERR
- movne \irqnr, #IRQ_PCI_SERR
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_DISCARD_TIMER
- movne \irqnr, #IRQ_DISCARD_TIMER
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_DPERR
- movne \irqnr, #IRQ_PCI_DPERR
- bne 1001f
-
- tst \irqstat, #IRQ_MASK_PCI_PERR
- movne \irqnr, #IRQ_PCI_PERR
-1001:
- .endm
-
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-12-03 10:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-03 10:08 [PATCH v3 00/14] ARM: enable IRQ stacks and vmap'ed stacks for UP Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 01/14] ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER Ard Biesheuvel
2021-12-03 10:08 ` Ard Biesheuvel [this message]
2021-12-03 10:08 ` [PATCH v3 03/14] ARM: iop32x: offset IRQ numbers by 1 Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 04/14] ARM: iop32x: use GENERIC_IRQ_MULTI_HANDLER Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 05/14] ARM: remove old-style irq entry Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 06/14] irqchip: nvic: Use GENERIC_IRQ_MULTI_HANDLER Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 07/14] ARM: entry: preserve thread_info pointer in switch_to Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 08/14] ARM: module: implement support for PC-relative group relocations Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 09/14] ARM: assembler: add optimized ldr/str macros to load variables from memory Ard Biesheuvel
2021-12-03 10:08 ` [PATCH v3 10/14] ARM: percpu: add SMP_ON_UP support Ard Biesheuvel
2021-12-03 10:09 ` [PATCH v3 11/14] ARM: use TLS register for 'current' on !SMP as well Ard Biesheuvel
2021-12-03 10:09 ` [PATCH v3 12/14] ARM: smp: defer TPIDRURO update for SMP v6 configurations too Ard Biesheuvel
2021-12-03 10:09 ` [PATCH v3 13/14] ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems Ard Biesheuvel
2021-12-03 10:09 ` [PATCH v3 14/14] ARM: v7m: enable support for IRQ stacks Ard Biesheuvel
2021-12-03 10:46 ` [PATCH v3 00/14] ARM: enable IRQ stacks and vmap'ed stacks for UP Vladimir Murzin
2021-12-03 12:53 ` Marc Zyngier
2021-12-05 0:38 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211203100903.334206-3-ardb@kernel.org \
--to=ardb@kernel.org \
--cc=arnd@arndb.de \
--cc=keescook@chromium.org \
--cc=keithpac@amazon.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=maz@kernel.org \
--cc=mr.bossman075@gmail.com \
--cc=ndesaulniers@google.com \
--cc=nico@fluxnic.net \
--cc=tony@atomide.com \
--cc=vladimir.murzin@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.