All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [net-next PATCH RFC v6 16/16] net: dsa: qca8k: cache lo and hi for mdio write
Date: Tue, 14 Dec 2021 23:44:09 +0100	[thread overview]
Message-ID: <20211214224409.5770-17-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20211214224409.5770-1-ansuelsmth@gmail.com>

From Documentation, we can cache lo and hi the same way we do with the
page. This massively reduce the mdio write as 3/4 of the time as we only
require to write the lo or hi part for a mdio write.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 60 ++++++++++++++++++++++++++++++++---------
 drivers/net/dsa/qca8k.h |  5 ++++
 2 files changed, 53 insertions(+), 12 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 4254cb12c7f7..cc8fac188389 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -88,6 +88,42 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
 	*page = regaddr & 0x3ff;
 }
 
+static int
+qca8k_set_lo(struct mii_bus *bus, int phy_id, u32 regnum,
+	     u16 lo, u16 *cached_lo)
+{
+	int ret;
+
+	if (lo == *cached_lo)
+		return 0;
+
+	ret = bus->write(bus, phy_id, regnum, lo);
+	if (ret < 0)
+		dev_err_ratelimited(&bus->dev,
+				    "failed to write qca8k 32bit lo register\n");
+
+	*cached_lo = lo;
+	return 0;
+}
+
+static int
+qca8k_set_hi(struct mii_bus *bus, int phy_id, u32 regnum,
+	     u16 hi, u16 *cached_hi)
+{
+	int ret;
+
+	if (hi == *cached_hi)
+		return 0;
+
+	ret = bus->write(bus, phy_id, regnum, hi);
+	if (ret < 0)
+		dev_err_ratelimited(&bus->dev,
+				    "failed to write qca8k 32bit hi register\n");
+
+	*cached_hi = hi;
+	return 0;
+}
+
 static int
 qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
 {
@@ -111,7 +147,8 @@ qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
 }
 
 static void
-qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+qca8k_mii_write32(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
+		  int phy_id, u32 regnum, u32 val)
 {
 	u16 lo, hi;
 	int ret;
@@ -119,12 +156,9 @@ qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
 	lo = val & 0xffff;
 	hi = (u16)(val >> 16);
 
-	ret = bus->write(bus, phy_id, regnum, lo);
+	ret = qca8k_set_lo(bus, phy_id, regnum, lo, &cache->lo);
 	if (ret >= 0)
-		ret = bus->write(bus, phy_id, regnum + 1, hi);
-	if (ret < 0)
-		dev_err_ratelimited(&bus->dev,
-				    "failed to write qca8k 32bit register\n");
+		ret = qca8k_set_hi(bus, phy_id, regnum + 1, hi, &cache->hi);
 }
 
 static int
@@ -368,7 +402,7 @@ qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
 	if (ret < 0)
 		goto exit;
 
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, mdio_cache, 0x10 | r2, r1, val);
 
 exit:
 	mutex_unlock(&bus->mdio_lock);
@@ -405,7 +439,7 @@ qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_
 
 	val &= ~mask;
 	val |= write_val;
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, mdio_cache, 0x10 | r2, r1, val);
 
 exit:
 	mutex_unlock(&bus->mdio_lock);
@@ -1042,14 +1076,14 @@ qca8k_mdio_write(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
 	if (ret)
 		goto exit;
 
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, val);
 
 	ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
 				   QCA8K_MDIO_MASTER_BUSY);
 
 exit:
 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, 0);
 
 	mutex_unlock(&bus->mdio_lock);
 
@@ -1079,7 +1113,7 @@ qca8k_mdio_read(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
 	if (ret)
 		goto exit;
 
-	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, val);
 
 	ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
 				   QCA8K_MDIO_MASTER_BUSY);
@@ -1090,7 +1124,7 @@ qca8k_mdio_read(struct mii_bus *bus, struct qca8k_mdio_cache *cache,
 
 exit:
 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
-	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+	qca8k_mii_write32(bus, cache, 0x10 | r2, r1, 0);
 
 	mutex_unlock(&bus->mdio_lock);
 
@@ -2985,6 +3019,8 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	}
 
 	priv->mdio_cache.page = 0xffff;
+	priv->mdio_cache.lo = 0xffff;
+	priv->mdio_cache.hi = 0xffff;
 
 	/* Check the detected switch id */
 	ret = qca8k_read_switch_id(priv);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index c4800ee06c34..79cd35f48730 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -369,6 +369,11 @@ struct qca8k_mdio_cache {
  * mdio writes
  */
 	u16 page;
+/* lo and hi can also be cached and from Documentation we can skip one
+ * extra mdio write if lo or hi is didn't change.
+ */
+	u16 lo;
+	u16 hi;
 };
 
 struct qca8k_priv {
-- 
2.33.1


  parent reply	other threads:[~2021-12-14 22:45 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-14 22:43 [net-next PATCH RFC v6 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 01/16] net: dsa: provide switch operations for tracking the master state Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 02/16] net: dsa: stop updating master MTU from master.c Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 03/16] net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown} Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 04/16] net: dsa: replay master state events in dsa_tree_{setup,teardown}_master Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 05/16] net: dsa: tag_qca: convert to FIELD macro Ansuel Smith
2021-12-14 22:43 ` [net-next PATCH RFC v6 06/16] net: dsa: tag_qca: move define to include linux/dsa Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 07/16] net: dsa: tag_qca: enable promisc_on_master flag Ansuel Smith
2021-12-15  9:58   ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 08/16] net: dsa: tag_qca: add define for handling mdio Ethernet packet Ansuel Smith
2021-12-15  9:58   ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 09/16] net: dsa: tag_qca: add define for handling MIB packet Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 10/16] net: dsa: tag_qca: add support for handling mdio Ethernet and " Ansuel Smith
2021-12-15  9:54   ` Vladimir Oltean
2021-12-14 22:44 ` [net-next PATCH RFC v6 11/16] net: dsa: qca8k: add tracking state of master port Ansuel Smith
2021-12-15  9:51   ` Vladimir Oltean
2021-12-16  0:00     ` Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 12/16] net: dsa: qca8k: add support for mdio read/write in Ethernet packet Ansuel Smith
2021-12-15  9:45   ` kernel test robot
2021-12-15  9:45     ` kernel test robot
2021-12-15  9:49   ` Vladimir Oltean
2021-12-15 16:53     ` Ansuel Smith
2021-12-15 12:47   ` Vladimir Oltean
2021-12-15 16:56     ` Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 13/16] net: dsa: qca8k: add support for mib autocast " Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 14/16] net: dsa: qca8k: add support for phy read/write with mdio Ethernet Ansuel Smith
2021-12-14 22:44 ` [net-next PATCH RFC v6 15/16] net: dsa: qca8k: move page cache to driver priv Ansuel Smith
2021-12-14 22:44 ` Ansuel Smith [this message]
2021-12-14 23:34 ` [net-next PATCH RFC v6 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2021-12-15 10:26 ` Vladimir Oltean
2021-12-15 16:34   ` Ansuel Smith
2021-12-16 23:38     ` Vladimir Oltean
2022-01-06 20:56       ` Ansuel Smith
2022-01-07 17:17         ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211214224409.5770-17-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.