From: Stephen Boyd <sboyd@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Lo <james.lo@mediatek.com>,
linux-kernel@vger.kernel.org,
Henry Chen <henryc.chen@mediatek.com>,
Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>
Subject: [PATCH 5/6] spmi: mediatek: Add support for MT8195
Date: Thu, 16 Dec 2021 11:08:11 -0800 [thread overview]
Message-ID: <20211216190812.1574801-6-sboyd@kernel.org> (raw)
In-Reply-To: <20211216190812.1574801-1-sboyd@kernel.org>
From: James Lo <james.lo@mediatek.com>
Add spmi support for MT8195.
Refine indent in spmi-mtk-pmif.c.
Signed-off-by: James Lo <james.lo@mediatek.com>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211119034613.32489-5-james.lo@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
drivers/spmi/spmi-mtk-pmif.c | 88 ++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
index f6644104088d..ad511f2c3324 100644
--- a/drivers/spmi/spmi-mtk-pmif.c
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -152,6 +152,54 @@ static const u32 mt6873_regs[] = {
[PMIF_SWINF_3_STA] = 0x0CE8,
};
+static const u32 mt8195_regs[] = {
+ [PMIF_INIT_DONE] = 0x0000,
+ [PMIF_INF_EN] = 0x0024,
+ [PMIF_ARB_EN] = 0x0150,
+ [PMIF_CMDISSUE_EN] = 0x03B8,
+ [PMIF_TIMER_CTRL] = 0x03E4,
+ [PMIF_SPI_MODE_CTRL] = 0x0408,
+ [PMIF_IRQ_EVENT_EN_0] = 0x0420,
+ [PMIF_IRQ_FLAG_0] = 0x0428,
+ [PMIF_IRQ_CLR_0] = 0x042C,
+ [PMIF_IRQ_EVENT_EN_1] = 0x0430,
+ [PMIF_IRQ_FLAG_1] = 0x0438,
+ [PMIF_IRQ_CLR_1] = 0x043C,
+ [PMIF_IRQ_EVENT_EN_2] = 0x0440,
+ [PMIF_IRQ_FLAG_2] = 0x0448,
+ [PMIF_IRQ_CLR_2] = 0x044C,
+ [PMIF_IRQ_EVENT_EN_3] = 0x0450,
+ [PMIF_IRQ_FLAG_3] = 0x0458,
+ [PMIF_IRQ_CLR_3] = 0x045C,
+ [PMIF_IRQ_EVENT_EN_4] = 0x0460,
+ [PMIF_IRQ_FLAG_4] = 0x0468,
+ [PMIF_IRQ_CLR_4] = 0x046C,
+ [PMIF_WDT_EVENT_EN_0] = 0x0474,
+ [PMIF_WDT_FLAG_0] = 0x0478,
+ [PMIF_WDT_EVENT_EN_1] = 0x047C,
+ [PMIF_WDT_FLAG_1] = 0x0480,
+ [PMIF_SWINF_0_ACC] = 0x0800,
+ [PMIF_SWINF_0_WDATA_31_0] = 0x0804,
+ [PMIF_SWINF_0_RDATA_31_0] = 0x0814,
+ [PMIF_SWINF_0_VLD_CLR] = 0x0824,
+ [PMIF_SWINF_0_STA] = 0x0828,
+ [PMIF_SWINF_1_ACC] = 0x0840,
+ [PMIF_SWINF_1_WDATA_31_0] = 0x0844,
+ [PMIF_SWINF_1_RDATA_31_0] = 0x0854,
+ [PMIF_SWINF_1_VLD_CLR] = 0x0864,
+ [PMIF_SWINF_1_STA] = 0x0868,
+ [PMIF_SWINF_2_ACC] = 0x0880,
+ [PMIF_SWINF_2_WDATA_31_0] = 0x0884,
+ [PMIF_SWINF_2_RDATA_31_0] = 0x0894,
+ [PMIF_SWINF_2_VLD_CLR] = 0x08A4,
+ [PMIF_SWINF_2_STA] = 0x08A8,
+ [PMIF_SWINF_3_ACC] = 0x08C0,
+ [PMIF_SWINF_3_WDATA_31_0] = 0x08C4,
+ [PMIF_SWINF_3_RDATA_31_0] = 0x08D4,
+ [PMIF_SWINF_3_VLD_CLR] = 0x08E4,
+ [PMIF_SWINF_3_STA] = 0x08E8,
+};
+
enum spmi_regs {
SPMI_OP_ST_CTRL,
SPMI_GRP_ID_EN,
@@ -165,6 +213,15 @@ enum spmi_regs {
SPMI_REC3,
SPMI_REC4,
SPMI_MST_DBG,
+
+ /* MT8195 spmi regs */
+ SPMI_MST_RCS_CTRL,
+ SPMI_SLV_3_0_EINT,
+ SPMI_SLV_7_4_EINT,
+ SPMI_SLV_B_8_EINT,
+ SPMI_SLV_F_C_EINT,
+ SPMI_REC_CMD_DEC,
+ SPMI_DEC_DBG,
};
static const u32 mt6873_spmi_regs[] = {
@@ -182,6 +239,28 @@ static const u32 mt6873_spmi_regs[] = {
[SPMI_MST_DBG] = 0x00fc,
};
+static const u32 mt8195_spmi_regs[] = {
+ [SPMI_OP_ST_CTRL] = 0x0000,
+ [SPMI_GRP_ID_EN] = 0x0004,
+ [SPMI_OP_ST_STA] = 0x0008,
+ [SPMI_MST_SAMPL] = 0x000C,
+ [SPMI_MST_REQ_EN] = 0x0010,
+ [SPMI_MST_RCS_CTRL] = 0x0014,
+ [SPMI_SLV_3_0_EINT] = 0x0020,
+ [SPMI_SLV_7_4_EINT] = 0x0024,
+ [SPMI_SLV_B_8_EINT] = 0x0028,
+ [SPMI_SLV_F_C_EINT] = 0x002C,
+ [SPMI_REC_CTRL] = 0x0040,
+ [SPMI_REC0] = 0x0044,
+ [SPMI_REC1] = 0x0048,
+ [SPMI_REC2] = 0x004C,
+ [SPMI_REC3] = 0x0050,
+ [SPMI_REC4] = 0x0054,
+ [SPMI_REC_CMD_DEC] = 0x005C,
+ [SPMI_DEC_DBG] = 0x00F8,
+ [SPMI_MST_DBG] = 0x00FC,
+};
+
static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
{
return readl(arb->base + arb->data->regs[reg]);
@@ -345,6 +424,12 @@ static const struct pmif_data mt6873_pmif_arb = {
.soc_chan = 2,
};
+static const struct pmif_data mt8195_pmif_arb = {
+ .regs = mt8195_regs,
+ .spmimst_regs = mt8195_spmi_regs,
+ .soc_chan = 2,
+};
+
static int mtk_spmi_probe(struct platform_device *pdev)
{
struct pmif *arb;
@@ -433,6 +518,9 @@ static const struct of_device_id mtk_spmi_match_table[] = {
{
.compatible = "mediatek,mt6873-spmi",
.data = &mt6873_pmif_arb,
+ }, {
+ .compatible = "mediatek,mt8195-spmi",
+ .data = &mt8195_pmif_arb,
}, {
/* sentinel */
},
--
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git
next prev parent reply other threads:[~2021-12-16 19:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-16 19:08 [PATCH 0/6] spmi patches for the next merge window Stephen Boyd
2021-12-16 19:08 ` [PATCH 1/6] spmi: pmic-arb: Add sid and address to error messages Stephen Boyd
2021-12-16 19:08 ` [PATCH 2/6] dt-bindings: spmi: remove the constraint of reg property Stephen Boyd
2021-12-16 19:08 ` [PATCH 3/6] dt-bindings: spmi: document binding for the Mediatek SPMI controller Stephen Boyd
2021-12-16 19:08 ` [PATCH 4/6] spmi: mediatek: Add support for MT6873/8192 Stephen Boyd
2021-12-16 19:08 ` Stephen Boyd [this message]
2021-12-16 19:08 ` [PATCH 6/6] spmi: spmi-pmic-arb: fix irq_set_type race condition Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211216190812.1574801-6-sboyd@kernel.org \
--to=sboyd@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=gregkh@linuxfoundation.org \
--cc=henryc.chen@mediatek.com \
--cc=hsin-hsiung.wang@mediatek.com \
--cc=james.lo@mediatek.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.