From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 30/32] staging: r8188eu: make odm_EdcaTurboCheck() static
Date: Wed, 29 Dec 2021 21:51:06 +0100 [thread overview]
Message-ID: <20211229205108.26373-31-straube.linux@gmail.com> (raw)
In-Reply-To: <20211229205108.26373-1-straube.linux@gmail.com>
Function odm_EdcaTurboCheck() is only used in odm.c. Make it static.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/hal/odm.c | 154 +++++++++---------
drivers/staging/r8188eu/include/odm_precomp.h | 2 -
2 files changed, 77 insertions(+), 79 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/odm.c b/drivers/staging/r8188eu/hal/odm.c
index 9afd9ed10432..acdf0ba40567 100644
--- a/drivers/staging/r8188eu/hal/odm.c
+++ b/drivers/staging/r8188eu/hal/odm.c
@@ -560,6 +560,83 @@ static void ODM_EdcaTurboInit(struct odm_dm_struct *pDM_Odm)
Adapter->recvpriv.bIsAnyNonBEPkts = false;
}
+static void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm)
+{
+ struct adapter *Adapter = pDM_Odm->Adapter;
+ u32 trafficIndex;
+ u32 edca_param;
+ u64 cur_tx_bytes = 0;
+ u64 cur_rx_bytes = 0;
+ u8 bbtchange = false;
+ struct hal_data_8188e *pHalData = &Adapter->haldata;
+ struct xmit_priv *pxmitpriv = &Adapter->xmitpriv;
+ struct recv_priv *precvpriv = &Adapter->recvpriv;
+ struct registry_priv *pregpriv = &Adapter->registrypriv;
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
+
+ if (!(pDM_Odm->SupportAbility & ODM_MAC_EDCA_TURBO))
+ return;
+
+ if (pregpriv->wifi_spec == 1)
+ goto dm_CheckEdcaTurbo_EXIT;
+
+ if (pmlmeinfo->assoc_AP_vendor >= HT_IOT_PEER_MAX)
+ goto dm_CheckEdcaTurbo_EXIT;
+
+ /* Check if the status needs to be changed. */
+ if ((bbtchange) || (!precvpriv->bIsAnyNonBEPkts)) {
+ cur_tx_bytes = pxmitpriv->tx_bytes - pxmitpriv->last_tx_bytes;
+ cur_rx_bytes = precvpriv->rx_bytes - precvpriv->last_rx_bytes;
+
+ /* traffic, TX or RX */
+ if ((pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_RALINK) ||
+ (pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_ATHEROS)) {
+ if (cur_tx_bytes > (cur_rx_bytes << 2)) {
+ /* Uplink TP is present. */
+ trafficIndex = UP_LINK;
+ } else {
+ /* Balance TP is present. */
+ trafficIndex = DOWN_LINK;
+ }
+ } else {
+ if (cur_rx_bytes > (cur_tx_bytes << 2)) {
+ /* Downlink TP is present. */
+ trafficIndex = DOWN_LINK;
+ } else {
+ /* Balance TP is present. */
+ trafficIndex = UP_LINK;
+ }
+ }
+
+ if ((pDM_Odm->DM_EDCA_Table.prv_traffic_idx != trafficIndex) || (!pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA)) {
+ if ((pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_CISCO) && (pmlmeext->cur_wireless_mode & WIRELESS_11_24N))
+ edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex];
+ else
+ edca_param = EDCAParam[HT_IOT_PEER_UNKNOWN][trafficIndex];
+
+ rtw_write32(Adapter, REG_EDCA_BE_PARAM, edca_param);
+
+ pDM_Odm->DM_EDCA_Table.prv_traffic_idx = trafficIndex;
+ }
+
+ pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA = true;
+ } else {
+ /* Turn Off EDCA turbo here. */
+ /* Restore original EDCA according to the declaration of AP. */
+ if (pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA) {
+ rtw_write32(Adapter, REG_EDCA_BE_PARAM, pHalData->AcParam_BE);
+ pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA = false;
+ }
+ }
+
+dm_CheckEdcaTurbo_EXIT:
+ /* Set variables for next time. */
+ precvpriv->bIsAnyNonBEPkts = false;
+ pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes;
+ precvpriv->last_rx_bytes = precvpriv->rx_bytes;
+}
+
/* 3 Export Interface */
/* 2011/09/21 MH Add to describe different team necessary resource allocate?? */
@@ -874,80 +951,3 @@ void ODM_TXPowerTrackingCheck(struct odm_dm_struct *pDM_Odm)
pDM_Odm->RFCalibrateInfo.TM_Trigger = 0;
}
}
-
-void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm)
-{
- struct adapter *Adapter = pDM_Odm->Adapter;
- u32 trafficIndex;
- u32 edca_param;
- u64 cur_tx_bytes = 0;
- u64 cur_rx_bytes = 0;
- u8 bbtchange = false;
- struct hal_data_8188e *pHalData = &Adapter->haldata;
- struct xmit_priv *pxmitpriv = &Adapter->xmitpriv;
- struct recv_priv *precvpriv = &Adapter->recvpriv;
- struct registry_priv *pregpriv = &Adapter->registrypriv;
- struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
- struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
-
- if (!(pDM_Odm->SupportAbility & ODM_MAC_EDCA_TURBO))
- return;
-
- if (pregpriv->wifi_spec == 1)
- goto dm_CheckEdcaTurbo_EXIT;
-
- if (pmlmeinfo->assoc_AP_vendor >= HT_IOT_PEER_MAX)
- goto dm_CheckEdcaTurbo_EXIT;
-
- /* Check if the status needs to be changed. */
- if ((bbtchange) || (!precvpriv->bIsAnyNonBEPkts)) {
- cur_tx_bytes = pxmitpriv->tx_bytes - pxmitpriv->last_tx_bytes;
- cur_rx_bytes = precvpriv->rx_bytes - precvpriv->last_rx_bytes;
-
- /* traffic, TX or RX */
- if ((pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_RALINK) ||
- (pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_ATHEROS)) {
- if (cur_tx_bytes > (cur_rx_bytes << 2)) {
- /* Uplink TP is present. */
- trafficIndex = UP_LINK;
- } else {
- /* Balance TP is present. */
- trafficIndex = DOWN_LINK;
- }
- } else {
- if (cur_rx_bytes > (cur_tx_bytes << 2)) {
- /* Downlink TP is present. */
- trafficIndex = DOWN_LINK;
- } else {
- /* Balance TP is present. */
- trafficIndex = UP_LINK;
- }
- }
-
- if ((pDM_Odm->DM_EDCA_Table.prv_traffic_idx != trafficIndex) || (!pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA)) {
- if ((pmlmeinfo->assoc_AP_vendor == HT_IOT_PEER_CISCO) && (pmlmeext->cur_wireless_mode & WIRELESS_11_24N))
- edca_param = EDCAParam[pmlmeinfo->assoc_AP_vendor][trafficIndex];
- else
- edca_param = EDCAParam[HT_IOT_PEER_UNKNOWN][trafficIndex];
-
- rtw_write32(Adapter, REG_EDCA_BE_PARAM, edca_param);
-
- pDM_Odm->DM_EDCA_Table.prv_traffic_idx = trafficIndex;
- }
-
- pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA = true;
- } else {
- /* Turn Off EDCA turbo here. */
- /* Restore original EDCA according to the declaration of AP. */
- if (pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA) {
- rtw_write32(Adapter, REG_EDCA_BE_PARAM, pHalData->AcParam_BE);
- pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA = false;
- }
- }
-
-dm_CheckEdcaTurbo_EXIT:
- /* Set variables for next time. */
- precvpriv->bIsAnyNonBEPkts = false;
- pxmitpriv->last_tx_bytes = pxmitpriv->tx_bytes;
- precvpriv->last_rx_bytes = precvpriv->rx_bytes;
-}
diff --git a/drivers/staging/r8188eu/include/odm_precomp.h b/drivers/staging/r8188eu/include/odm_precomp.h
index d6046cf9645a..994f5c883979 100644
--- a/drivers/staging/r8188eu/include/odm_precomp.h
+++ b/drivers/staging/r8188eu/include/odm_precomp.h
@@ -31,6 +31,4 @@
#include "odm_RegConfig8188E.h"
#include "odm_RTL8188E.h"
-void odm_EdcaTurboCheck(struct odm_dm_struct *pDM_Odm);
-
#endif /* __ODM_PRECOMP_H__ */
--
2.34.1
next prev parent reply other threads:[~2021-12-29 20:51 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-29 20:50 [PATCH 00/32] staging: r8188eu: remove odm_interface and odm_precomp.h Michael Straube
2021-12-29 20:50 ` [PATCH 01/32] staging: r8188eu: remove ODM_SetMACReg() Michael Straube
2021-12-29 20:50 ` [PATCH 02/32] staging: r8188eu: remove ODM_GetMACReg() Michael Straube
2021-12-29 20:50 ` [PATCH 03/32] staging: r8188eu: remove ODM_GetRFReg() Michael Straube
2021-12-29 20:50 ` [PATCH 04/32] staging: r8188eu: remove ODM_SetRFReg() Michael Straube
2021-12-29 20:50 ` [PATCH 05/32] staging: r8188eu: remove ODM_GetBBReg() Michael Straube
2021-12-29 20:50 ` [PATCH 06/32] staging: r8188eu: remove ODM_SetBBReg() Michael Straube
2021-12-29 20:50 ` [PATCH 07/32] staging: r8188eu: clean up coding style issues Michael Straube
2021-12-29 20:50 ` [PATCH 08/32] staging: r8188eu: remove ODM_sleep_ms() Michael Straube
2021-12-29 20:50 ` [PATCH 09/32] staging: r8188eu: remove ODM_delay_us() Michael Straube
2021-12-29 20:50 ` [PATCH 10/32] staging: r8188eu: remove ODM_delay_ms() Michael Straube
2021-12-29 20:50 ` [PATCH 11/32] staging: r8188eu: remove ODM_CompareMemory() Michael Straube
2021-12-29 20:50 ` [PATCH 12/32] staging: r8188eu: remove odm_interface Michael Straube
2021-12-29 20:50 ` [PATCH 13/32] staging: r8188eu: make odm_ConfigRFReg_8188E() static Michael Straube
2021-12-29 20:50 ` [PATCH 14/32] staging: r8188eu: remove unused prototypes Michael Straube
2021-12-29 20:50 ` [PATCH 15/32] staging: r8188eu: make odm_DIGInit() static Michael Straube
2021-12-29 20:50 ` [PATCH 16/32] staging: r8188eu: make odm_DIG() static Michael Straube
2021-12-29 20:50 ` [PATCH 17/32] staging: r8188eu: make odm_CommonInfoSelfInit() static Michael Straube
2021-12-29 20:50 ` [PATCH 18/32] staging: r8188eu: make odm_CommonInfoSelfUpdate() static Michael Straube
2021-12-29 20:50 ` [PATCH 19/32] staging: r8188eu: make odm_RateAdaptiveMaskInit() static Michael Straube
2021-12-29 20:50 ` [PATCH 20/32] staging: r8188eu: make odm_RefreshRateAdaptiveMask() static Michael Straube
2022-01-06 12:26 ` Dan Carpenter
2022-01-07 8:48 ` Michael Straube
2021-12-29 20:50 ` [PATCH 21/32] staging: r8188eu: make odm_DynamicBBPowerSavingInit() static Michael Straube
2021-12-29 20:50 ` [PATCH 22/32] staging: r8188eu: make odm_FalseAlarmCounterStatistics() static Michael Straube
2021-12-29 20:50 ` [PATCH 23/32] staging: r8188eu: make odm_CCKPacketDetectionThresh() static Michael Straube
2021-12-29 20:51 ` [PATCH 24/32] staging: r8188eu: make odm_RSSIMonitorCheck() static Michael Straube
2021-12-29 20:51 ` [PATCH 25/32] staging: r8188eu: remove odm_TXPowerTrackingInit() Michael Straube
2021-12-29 20:51 ` [PATCH 26/32] staging: r8188eu: make odm_TXPowerTrackingThermalMeterInit() static Michael Straube
2021-12-29 20:51 ` [PATCH 27/32] staging: r8188eu: make odm_InitHybridAntDiv() static Michael Straube
2021-12-29 20:51 ` [PATCH 28/32] staging: r8188eu: make odm_HwAntDiv() static Michael Straube
2021-12-29 20:51 ` [PATCH 29/32] staging: r8188eu: make ODM_EdcaTurboInit() static Michael Straube
2021-12-29 20:51 ` Michael Straube [this message]
2021-12-29 20:51 ` [PATCH 31/32] staging: r8188eu: remove unnecessary comments Michael Straube
2021-12-29 20:51 ` [PATCH 32/32] staging: r8188eu: remove header odm_precomp.h Michael Straube
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211229205108.26373-31-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.