From: Michael Straube <straube.linux@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, phil@philpotter.co.uk,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Michael Straube <straube.linux@gmail.com>
Subject: [PATCH 05/11] staging: r8188eu: clean up struct rtw_dig
Date: Sun, 2 Jan 2022 14:11:35 +0100 [thread overview]
Message-ID: <20220102131141.12310-6-straube.linux@gmail.com> (raw)
In-Reply-To: <20220102131141.12310-1-straube.linux@gmail.com>
Remove unused and set but never used fields from struct rtw_dig.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
---
drivers/staging/r8188eu/hal/odm.c | 11 ---------
drivers/staging/r8188eu/include/odm.h | 32 ---------------------------
2 files changed, 43 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/odm.c b/drivers/staging/r8188eu/hal/odm.c
index 4ec377f1b90c..d8fa587ff286 100644
--- a/drivers/staging/r8188eu/hal/odm.c
+++ b/drivers/staging/r8188eu/hal/odm.c
@@ -146,24 +146,14 @@ static void odm_DIGInit(struct odm_dm_struct *pDM_Odm)
struct adapter *adapter = pDM_Odm->Adapter;
pDM_DigTable->CurIGValue = (u8)rtl8188e_PHY_QueryBBReg(adapter, ODM_REG_IGI_A_11N, ODM_BIT_IGI_11N);
- pDM_DigTable->RssiLowThresh = DM_DIG_THRESH_LOW;
- pDM_DigTable->RssiHighThresh = DM_DIG_THRESH_HIGH;
- pDM_DigTable->FALowThresh = DM_false_ALARM_THRESH_LOW;
- pDM_DigTable->FAHighThresh = DM_false_ALARM_THRESH_HIGH;
pDM_DigTable->rx_gain_range_max = DM_DIG_MAX_NIC;
pDM_DigTable->rx_gain_range_min = DM_DIG_MIN_NIC;
- pDM_DigTable->BackoffVal = DM_DIG_BACKOFF_DEFAULT;
- pDM_DigTable->BackoffVal_range_max = DM_DIG_BACKOFF_MAX;
- pDM_DigTable->BackoffVal_range_min = DM_DIG_BACKOFF_MIN;
- pDM_DigTable->PreCCK_CCAThres = 0xFF;
pDM_DigTable->CurCCK_CCAThres = 0x83;
pDM_DigTable->ForbiddenIGI = DM_DIG_MIN_NIC;
pDM_DigTable->LargeFAHit = 0;
pDM_DigTable->Recover_cnt = 0;
pDM_DigTable->DIG_Dynamic_MIN_0 = DM_DIG_MIN_NIC;
- pDM_DigTable->DIG_Dynamic_MIN_1 = DM_DIG_MIN_NIC;
pDM_DigTable->bMediaConnect_0 = false;
- pDM_DigTable->bMediaConnect_1 = false;
/* To Initialize pDM_Odm->bDMInitialGainEnable == false to avoid DIG error */
pDM_Odm->bDMInitialGainEnable = true;
@@ -771,7 +761,6 @@ void ODM_Write_CCK_CCA_Thres(struct odm_dm_struct *pDM_Odm, u8 CurCCK_CCAThres)
if (pDM_DigTable->CurCCK_CCAThres != CurCCK_CCAThres) /* modify by Guo.Mingzhi 2012-01-03 */
rtw_write8(pDM_Odm->Adapter, ODM_REG_CCK_CCA_11N, CurCCK_CCAThres);
- pDM_DigTable->PreCCK_CCAThres = pDM_DigTable->CurCCK_CCAThres;
pDM_DigTable->CurCCK_CCAThres = CurCCK_CCAThres;
}
diff --git a/drivers/staging/r8188eu/include/odm.h b/drivers/staging/r8188eu/include/odm.h
index 46fdc87a5e2f..065f2ec91a38 100644
--- a/drivers/staging/r8188eu/include/odm.h
+++ b/drivers/staging/r8188eu/include/odm.h
@@ -5,43 +5,21 @@
#define __HALDMOUTSRC_H__
struct rtw_dig {
- u8 Dig_Enable_Flag;
- u8 Dig_Ext_Port_Stage;
-
- int RssiLowThresh;
- int RssiHighThresh;
-
- u32 FALowThresh;
- u32 FAHighThresh;
-
- u8 CurSTAConnectState;
- u8 PreSTAConnectState;
- u8 CurMultiSTAConnectState;
-
u8 PreIGValue;
u8 CurIGValue;
u8 BackupIGValue;
- s8 BackoffVal;
- s8 BackoffVal_range_max;
- s8 BackoffVal_range_min;
u8 rx_gain_range_max;
u8 rx_gain_range_min;
- u8 Rssi_val_min;
- u8 PreCCK_CCAThres;
u8 CurCCK_CCAThres;
- u8 PreCCKPDState;
- u8 CurCCKPDState;
u8 LargeFAHit;
u8 ForbiddenIGI;
u32 Recover_cnt;
u8 DIG_Dynamic_MIN_0;
- u8 DIG_Dynamic_MIN_1;
bool bMediaConnect_0;
- bool bMediaConnect_1;
u32 AntDiv_RSSI_max;
u32 RSSI_max;
@@ -482,12 +460,6 @@ enum odm_bb_config_type {
CONFIG_BB_PHY_REG_PG,
};
-#define DM_DIG_THRESH_HIGH 40
-#define DM_DIG_THRESH_LOW 35
-
-#define DM_false_ALARM_THRESH_LOW 400
-#define DM_false_ALARM_THRESH_HIGH 1000
-
#define DM_DIG_MAX_NIC 0x4e
#define DM_DIG_MIN_NIC 0x1e /* 0x22/0x1c */
@@ -499,10 +471,6 @@ enum odm_bb_config_type {
#define DM_DIG_FA_TH1 0x300/* 0x100 */
#define DM_DIG_FA_TH2 0x400/* 0x200 */
-#define DM_DIG_BACKOFF_MAX 12
-#define DM_DIG_BACKOFF_MIN -4
-#define DM_DIG_BACKOFF_DEFAULT 10
-
/* 3=========================================================== */
/* 3 Rate Adaptive */
/* 3=========================================================== */
--
2.34.1
next prev parent reply other threads:[~2022-01-02 13:11 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-02 13:11 [PATCH 00/11] staging: r8188eu: the next set of cleanups Michael Straube
2022-01-02 13:11 ` [PATCH 01/11] staging: r8188eu: remove MAX_CHANNEL_NUM_2G Michael Straube
2022-01-02 13:11 ` [PATCH 02/11] staging: r8188eu: remove struct rt_channel_plan_2g Michael Straube
2022-01-02 13:11 ` [PATCH 03/11] staging: r8188eu: remove unused enum and defines Michael Straube
2022-01-02 13:11 ` [PATCH 04/11] staging: r8188eu: struct rx_hpc is not used Michael Straube
2022-01-02 13:11 ` Michael Straube [this message]
2022-01-02 13:11 ` [PATCH 06/11] staging: r8188eu: clean up struct sw_ant_switch Michael Straube
2022-01-02 13:11 ` [PATCH 07/11] staging: r8188eu: struct odm_sta_info is not used Michael Straube
2022-01-02 13:11 ` [PATCH 08/11] staging: r8188eu: enum hw90_block " Michael Straube
2022-01-02 13:11 ` [PATCH 09/11] staging: r8188eu: remove unneeded comments from Hal8188EPhyCfg.h Michael Straube
2022-01-02 13:11 ` [PATCH 10/11] staging: r8188eu: remove unused defines " Michael Straube
2022-01-02 13:11 ` [PATCH 11/11] staging: r8188eu: remove unused defines from rtw_eeprom.h Michael Straube
2022-01-02 18:06 ` [PATCH 00/11] staging: r8188eu: the next set of cleanups Martin Kaiser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220102131141.12310-6-straube.linux@gmail.com \
--to=straube.linux@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=phil@philpotter.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.