[PATCH] udoo_neo: fix udoo neo UNDEFINED

[Tommaso Merciai <tomm.merciai@gmail.com>]

get_board_value function fails to get the right board configuration on
second time that is call. This patch move get_board_value function at
spl level, once is call, store the right configuration into gd static
variable gd->board_type and fix the previous error.
get_board_value is now call only one time.

Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
---
 board/udoo/neo/neo.c       | 77 +++++++++++++++++++-------------------
 configs/udoo_neo_defconfig |  1 +
 2 files changed, 40 insertions(+), 38 deletions(-)

diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c
index 62f81fff68..0ca5fbda60 100644
--- a/board/udoo/neo/neo.c
+++ b/board/udoo/neo/neo.c
@@ -235,13 +235,6 @@ static iomux_v3_cfg_t const phy_control_pads[] = {
 	MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
 };
 
-static iomux_v3_cfg_t const board_recognition_pads[] = {
-	/*Connected to R184*/
-	MX6_PAD_NAND_READY_B__GPIO4_IO_13 | BOARD_DETECT_PAD_CFG,
-	/*Connected to R185*/
-	MX6_PAD_NAND_ALE__GPIO4_IO_0 | BOARD_DETECT_PAD_CFG,
-};
-
 static iomux_v3_cfg_t const wdog_b_pad = {
 	MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 };
@@ -308,34 +301,6 @@ int board_init(void)
 	return 0;
 }
 
-static int get_board_value(void)
-{
-	int r184, r185;
-
-	imx_iomux_v3_setup_multiple_pads(board_recognition_pads,
-					 ARRAY_SIZE(board_recognition_pads));
-
-	gpio_request(IMX_GPIO_NR(4, 13), "r184");
-	gpio_request(IMX_GPIO_NR(4, 0), "r185");
-	gpio_direction_input(IMX_GPIO_NR(4, 13));
-	gpio_direction_input(IMX_GPIO_NR(4, 0));
-
-	r184 = gpio_get_value(IMX_GPIO_NR(4, 13));
-	r185 = gpio_get_value(IMX_GPIO_NR(4, 0));
-
-	/*
-	 * Machine selection -
-	 * Machine          r184,    r185
-	 * ---------------------------------
-	 * Basic              0        0
-	 * Basic Ks           0        1
-	 * Full               1        0
-	 * Extended           1        1
-	 */
-
-	return (r184 << 1) + r185;
-}
-
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
@@ -370,7 +335,7 @@ int board_mmc_init(struct bd_info *bis)
 
 static char *board_string(void)
 {
-	switch (get_board_value()) {
+	switch (gd->board_type) {
 	case UDOO_NEO_TYPE_BASIC:
 		return "BASIC";
 	case UDOO_NEO_TYPE_BASIC_KS:
@@ -403,6 +368,13 @@ int board_late_init(void)
 #include <linux/libfdt.h>
 #include <asm/arch/mx6-ddr.h>
 
+static iomux_v3_cfg_t const board_recognition_pads[] = {
+	/*Connected to R184*/
+	MX6_PAD_NAND_READY_B__GPIO4_IO_13 | BOARD_DETECT_PAD_CFG,
+	/*Connected to R185*/
+	MX6_PAD_NAND_ALE__GPIO4_IO_0 | BOARD_DETECT_PAD_CFG,
+};
+
 static const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = {
 	.dram_dqm0 = 0x00000028,
 	.dram_dqm1 = 0x00000028,
@@ -482,6 +454,34 @@ static struct mx6_ddr3_cfg neo_basic_mem_ddr = {
 	.trasmin = 3500,
 };
 
+static int get_board_value(void)
+{
+	int r184, r185;
+
+	imx_iomux_v3_setup_multiple_pads(board_recognition_pads,
+					 ARRAY_SIZE(board_recognition_pads));
+
+	gpio_request(IMX_GPIO_NR(4, 13), "r184");
+	gpio_request(IMX_GPIO_NR(4, 0), "r185");
+	gpio_direction_input(IMX_GPIO_NR(4, 13));
+	gpio_direction_input(IMX_GPIO_NR(4, 0));
+
+	r184 = gpio_get_value(IMX_GPIO_NR(4, 13));
+	r185 = gpio_get_value(IMX_GPIO_NR(4, 0));
+
+	/*
+	 * Machine selection -
+	 * Machine          r184,    r185
+	 * ---------------------------------
+	 * Basic              0        0
+	 * Basic Ks           0        1
+	 * Full               1        0
+	 * Extended           1        1
+	 */
+
+	return (r184 << 1) + r185;
+}
+
 static void ccgr_init(void)
 {
 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -498,7 +498,7 @@ static void ccgr_init(void)
 
 static void spl_dram_init(void)
 {
-	int board = get_board_value();
+	gd->board_type = get_board_value();
 
 	struct mx6_ddr_sysinfo sysinfo = {
 		.dsize = 1, /* width of data bus: 1 = 32 bits */
@@ -516,7 +516,8 @@ static void spl_dram_init(void)
 	};
 
 	mx6sx_dram_iocfg(32, &mx6_ddr_ioregs, &mx6_grp_ioregs);
-	if (board == UDOO_NEO_TYPE_BASIC || board == UDOO_NEO_TYPE_BASIC_KS)
+	if (gd->board_type == UDOO_NEO_TYPE_BASIC ||
+		gd->board_type == UDOO_NEO_TYPE_BASIC_KS)
 		mx6_dram_cfg(&sysinfo, &neo_basic_mmcd_calib,
 			     &neo_basic_mem_ddr);
 	else
diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index ca08de1bd4..eff33909d7 100644
--- a/configs/udoo_neo_defconfig
+++ b/configs/udoo_neo_defconfig
@@ -62,3 +62,4 @@ CONFIG_DM_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_MXC_UART=y
 CONFIG_IMX_THERMAL=y
+CONFIG_BOARD_TYPES=y
\ No newline at end of file
-- 
2.25.1