[PATCH 4/4] hw/arm: kudo add lm75s on bus 13

[Patrick Venture <venture@google.com>]

Add the four lm75s behind the mux on bus 13.

Tested by booting the firmware:
lm75 42-0048: hwmon0: sensor 'lm75'
lm75 43-0049: supply vs not found, using dummy regulator
lm75 43-0049: hwmon1: sensor 'lm75'
lm75 44-0048: supply vs not found, using dummy regulator
lm75 44-0048: hwmon2: sensor 'lm75'
lm75 45-0049: supply vs not found, using dummy regulator
lm75 45-0049: hwmon3: sensor 'lm75'

Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
---
 hw/arm/npcm7xx_boards.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index 4cd58972c5..7d0f3148be 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -330,6 +330,8 @@ static void quanta_gbs_i2c_init(NPCM7xxState *soc)
 
 static void kudo_bmc_i2c_init(NPCM7xxState *soc)
 {
+    I2CSlave *i2c_mux;
+
     i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 1), TYPE_PCA9548, 0x75);
     i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 1), TYPE_PCA9548, 0x77);
 
@@ -337,7 +339,14 @@ static void kudo_bmc_i2c_init(NPCM7xxState *soc)
 
     at24c_eeprom_init(soc, 4, 0x50, 8192); /* mbfru */
 
-    i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 13), TYPE_PCA9548, 0x77);
+    i2c_mux = i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 13),
+                                      TYPE_PCA9548, 0x77);
+
+    /* tmp105 is compatible with the lm75 */
+    i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 2), "tmp105", 0x48);
+    i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 3), "tmp105", 0x49);
+    i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 4), "tmp105", 0x48);
+    i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), "tmp105", 0x49);
 
     at24c_eeprom_init(soc, 14, 0x55, 8192); /* bmcfru */
 
-- 
2.34.1.448.ga2b2bfdf31-goog