From: Jesse Taube <mr.bossman075@gmail.com>
To: u-boot@lists.denx.de
Cc: jagan@amarulasolutions.com, andre.przywara@arm.com,
hdegoede@redhat.com, sjg@chromium.org, icenowy@aosc.io,
marek.behun@nic.cz, festevam@denx.de, narmstrong@baylibre.com,
tharvey@gateworks.com, christianshewitt@gmail.com,
pbrobinson@gmail.com, lokeshvutla@ti.com,
jernej.skrabec@gmail.com, hs@denx.de, samuel@sholland.org,
arnaud.ferraris@gmail.com, giulio.benetti@benettiengineering.com,
Mr.Bossman075@gmail.com, thirtythreeforty@gmail.com
Subject: [PATCH 03/11] dt-bindings: clock: Add initial suniv headers
Date: Tue, 4 Jan 2022 19:35:00 -0500 [thread overview]
Message-ID: <20220105003508.1143140-4-Mr.Bossman075@gmail.com> (raw)
In-Reply-To: <20220105003508.1143140-1-Mr.Bossman075@gmail.com>
From: Icenowy Zheng <icenowy@aosc.io>
This commit introduces suniv dt-bindings headers needed for
device tree files.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
---
include/dt-bindings/clock/suniv-ccu.h | 68 +++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 include/dt-bindings/clock/suniv-ccu.h
diff --git a/include/dt-bindings/clock/suniv-ccu.h b/include/dt-bindings/clock/suniv-ccu.h
new file mode 100644
index 0000000000..83d3c18ac0
--- /dev/null
+++ b/include/dt-bindings/clock/suniv-ccu.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUNIV_H_
+#define _DT_BINDINGS_CLK_SUNIV_H_
+
+#define CLK_CPU 11
+
+#define CLK_BUS_MMC0 14
+#define CLK_BUS_MMC1 15
+#define CLK_BUS_DRAM 16
+#define CLK_BUS_SPI0 17
+#define CLK_BUS_SPI1 18
+#define CLK_BUS_OTG 19
+#define CLK_BUS_VE 20
+#define CLK_BUS_LCD 21
+#define CLK_BUS_DEINTERLACE 22
+#define CLK_BUS_CSI 23
+#define CLK_BUS_TVD 24
+#define CLK_BUS_TVE 25
+#define CLK_BUS_DE_BE 26
+#define CLK_BUS_DE_FE 27
+#define CLK_BUS_CODEC 28
+#define CLK_BUS_SPDIF 29
+#define CLK_BUS_IR 30
+#define CLK_BUS_RSB 31
+#define CLK_BUS_I2S0 32
+#define CLK_BUS_I2C0 33
+#define CLK_BUS_I2C1 34
+#define CLK_BUS_I2C2 35
+#define CLK_BUS_PIO 36
+#define CLK_BUS_UART0 37
+#define CLK_BUS_UART1 38
+#define CLK_BUS_UART2 39
+
+#define CLK_MMC0 40
+#define CLK_MMC0_SAMPLE 41
+#define CLK_MMC0_OUTPUT 42
+#define CLK_MMC1 43
+#define CLK_MMC1_SAMPLE 44
+#define CLK_MMC1_OUTPUT 45
+#define CLK_I2S 46
+#define CLK_SPDIF 47
+
+#define CLK_USB_PHY0 48
+
+#define CLK_DRAM_VE 49
+#define CLK_DRAM_CSI 50
+#define CLK_DRAM_DEINTERLACE 51
+#define CLK_DRAM_TVD 52
+#define CLK_DRAM_DE_FE 53
+#define CLK_DRAM_DE_BE 54
+
+#define CLK_DE_BE 55
+#define CLK_DE_FE 56
+#define CLK_TCON 57
+#define CLK_DEINTERLACE 58
+#define CLK_TVE2_CLK 59
+#define CLK_TVE1_CLK 60
+#define CLK_TVD 61
+#define CLK_CSI 62
+#define CLK_VE 63
+#define CLK_CODEC 64
+#define CLK_AVS 65
+
+#endif
--
2.34.1
next prev parent reply other threads:[~2022-01-05 0:35 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-05 0:34 [PATCH 00/11] Add support for SUNIV and F1C100s Jesse Taube
2022-01-05 0:34 ` [PATCH 01/11] arm: arm926ej-s: start.S: port save_boot_params support from armv7 code Jesse Taube
2022-01-21 1:57 ` Andre Przywara
2022-01-05 0:34 ` [PATCH 02/11] arm: arm926ej-s: add sunxi code Jesse Taube
2022-01-21 2:25 ` Andre Przywara
2022-01-21 3:16 ` Jesse Taube
2022-01-24 1:45 ` Andre Przywara
2022-01-05 0:35 ` Jesse Taube [this message]
2022-01-21 1:57 ` [PATCH 03/11] dt-bindings: clock: Add initial suniv headers Andre Przywara
2022-01-05 0:35 ` [PATCH 04/11] dt-bindings: reset: " Jesse Taube
2022-01-21 1:58 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 05/11] ARM: sunxi: Add support for F1C100s Jesse Taube
2022-01-26 2:05 ` Andre Przywara
2022-01-26 4:53 ` Jesse Taube
2022-01-26 10:08 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 06/11] sunxi: Add F1C100s DRAM initial support Jesse Taube
2022-01-05 0:35 ` [PATCH 07/11] sunxi: board: Add support for SUNIV Jesse Taube
2022-01-21 1:58 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 08/11] configs: sunxi: Add common SUNIV header Jesse Taube
2022-01-26 2:07 ` Andre Przywara
2022-01-05 0:35 ` [PATCH 09/11] sunxi: Add support for SUNIV architecture Jesse Taube
2022-01-26 14:13 ` Andre Przywara
2022-01-26 14:38 ` Jesse Taube
2022-01-29 3:21 ` Jesse Taube
2022-01-29 11:51 ` Andre Przywara
2022-01-29 19:24 ` Jesse Taube
2022-01-29 20:44 ` Giulio Benetti
2022-01-29 20:59 ` Samuel Holland
2022-01-29 21:05 ` Jesse Taube
2022-01-29 21:18 ` Giulio Benetti
2022-01-29 21:19 ` Jesse Taube
2022-01-29 21:21 ` Giulio Benetti
2022-01-29 21:23 ` Jesse Taube
2022-01-05 0:35 ` [PATCH 10/11] ARM: dts: suniv: Add device tree files for F1C100s Jesse Taube
2022-01-21 1:59 ` Andre Przywara
2022-01-21 2:12 ` Jesse Taube
2022-01-05 0:35 ` [PATCH 11/11] configs: sunxi: Add support for Lichee Pi Nano Jesse Taube
2022-01-26 14:13 ` Andre Przywara
2022-01-26 14:48 ` Jesse Taube
2022-01-05 11:36 ` [PATCH 00/11] Add support for SUNIV and F1C100s Icenowy Zheng
2022-01-05 12:14 ` Andre Przywara
2022-01-05 12:54 ` Jesse Taube
2022-01-05 16:00 ` Giulio Benetti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220105003508.1143140-4-Mr.Bossman075@gmail.com \
--to=mr.bossman075@gmail.com \
--cc=andre.przywara@arm.com \
--cc=arnaud.ferraris@gmail.com \
--cc=christianshewitt@gmail.com \
--cc=festevam@denx.de \
--cc=giulio.benetti@benettiengineering.com \
--cc=hdegoede@redhat.com \
--cc=hs@denx.de \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=lokeshvutla@ti.com \
--cc=marek.behun@nic.cz \
--cc=narmstrong@baylibre.com \
--cc=pbrobinson@gmail.com \
--cc=samuel@sholland.org \
--cc=sjg@chromium.org \
--cc=tharvey@gateworks.com \
--cc=thirtythreeforty@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.