All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Eduardo Habkost" <eduardo@habkost.net>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Daniel P . Berrangé" <berrange@redhat.com>,
	"Eduardo Habkost" <ehabkost@redhat.com>,
	"Richard Henderson" <richard.henderson@linaro.org>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PULL v3 27/55] hw/i386: expose a "smbios-entry-point-type" PC machine property
Date: Fri, 7 Jan 2022 20:04:56 -0500	[thread overview]
Message-ID: <20220108003423.15830-28-mst@redhat.com> (raw)
In-Reply-To: <20220108003423.15830-1-mst@redhat.com>

From: Eduardo Habkost <ehabkost@redhat.com>

The i440fx and Q35 machine types are both hardcoded to use the
legacy SMBIOS 2.1 (32-bit) entry point. This is a sensible
conservative choice because SeaBIOS only supports SMBIOS 2.1

EDK2, however, can also support SMBIOS 3.0 (64-bit) entry points,
and QEMU already uses this on the ARM virt machine type.

This adds a property to allow the choice of SMBIOS entry point
versions For example to opt in to 64-bit SMBIOS entry point:

   $QEMU -machine q35,smbios-entry-point-type=64

Based on a patch submitted by Daniel Berrangé.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211026151100.1691925-4-ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
 include/hw/i386/pc.h |  4 ++++
 hw/i386/pc.c         | 26 ++++++++++++++++++++++++++
 hw/i386/pc_piix.c    |  2 +-
 hw/i386/pc_q35.c     |  2 +-
 4 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index b38947c224..9c9f4ac748 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -13,6 +13,7 @@
 #include "hw/hotplug.h"
 #include "qom/object.h"
 #include "hw/i386/sgx-epc.h"
+#include "hw/firmware/smbios.h"
 
 #define HPET_INTCAP "hpet-intcap"
 
@@ -40,6 +41,7 @@ typedef struct PCMachineState {
     /* Configuration options: */
     uint64_t max_ram_below_4g;
     OnOffAuto vmport;
+    SmbiosEntryPointType smbios_entry_point_type;
 
     bool acpi_build_enabled;
     bool smbus_enabled;
@@ -63,6 +65,8 @@ typedef struct PCMachineState {
 #define PC_MACHINE_SATA             "sata"
 #define PC_MACHINE_PIT              "pit"
 #define PC_MACHINE_MAX_FW_SIZE      "max-fw-size"
+#define PC_MACHINE_SMBIOS_EP        "smbios-entry-point-type"
+
 /**
  * PCMachineClass:
  *
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index fccde2ef39..959efa5b3f 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -77,6 +77,7 @@
 #include "hw/mem/nvdimm.h"
 #include "qapi/error.h"
 #include "qapi/qapi-visit-common.h"
+#include "qapi/qapi-visit-machine.h"
 #include "qapi/visitor.h"
 #include "hw/core/cpu.h"
 #include "hw/usb.h"
@@ -1524,6 +1525,23 @@ static void pc_machine_set_default_bus_bypass_iommu(Object *obj, bool value,
     pcms->default_bus_bypass_iommu = value;
 }
 
+static void pc_machine_get_smbios_ep(Object *obj, Visitor *v, const char *name,
+                                     void *opaque, Error **errp)
+{
+    PCMachineState *pcms = PC_MACHINE(obj);
+    SmbiosEntryPointType smbios_entry_point_type = pcms->smbios_entry_point_type;
+
+    visit_type_SmbiosEntryPointType(v, name, &smbios_entry_point_type, errp);
+}
+
+static void pc_machine_set_smbios_ep(Object *obj, Visitor *v, const char *name,
+                                     void *opaque, Error **errp)
+{
+    PCMachineState *pcms = PC_MACHINE(obj);
+
+    visit_type_SmbiosEntryPointType(v, name, &pcms->smbios_entry_point_type, errp);
+}
+
 static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v,
                                             const char *name, void *opaque,
                                             Error **errp)
@@ -1614,6 +1632,8 @@ static void pc_machine_initfn(Object *obj)
     pcms->vmport = ON_OFF_AUTO_OFF;
 #endif /* CONFIG_VMPORT */
     pcms->max_ram_below_4g = 0; /* use default */
+    pcms->smbios_entry_point_type = SMBIOS_ENTRY_POINT_TYPE_32;
+
     /* acpi build is enabled by default if machine supports it */
     pcms->acpi_build_enabled = PC_MACHINE_GET_CLASS(pcms)->has_acpi_build;
     pcms->smbus_enabled = true;
@@ -1756,6 +1776,12 @@ static void pc_machine_class_init(ObjectClass *oc, void *data)
         NULL, NULL);
     object_class_property_set_description(oc, PC_MACHINE_MAX_FW_SIZE,
         "Maximum combined firmware size");
+
+    object_class_property_add(oc, PC_MACHINE_SMBIOS_EP, "str",
+        pc_machine_get_smbios_ep, pc_machine_set_smbios_ep,
+        NULL, NULL);
+    object_class_property_set_description(oc, PC_MACHINE_SMBIOS_EP,
+        "SMBIOS Entry Point type [32, 64]");
 }
 
 static const TypeInfo pc_machine_info = {
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index 25f918b609..7c7790a5ce 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -177,7 +177,7 @@ static void pc_init1(MachineState *machine,
         smbios_set_defaults("QEMU", "Standard PC (i440FX + PIIX, 1996)",
                             mc->name, pcmc->smbios_legacy_mode,
                             pcmc->smbios_uuid_encoded,
-                            SMBIOS_ENTRY_POINT_TYPE_32);
+                            pcms->smbios_entry_point_type);
     }
 
     /* allocate ram and load rom/bios */
diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
index 1103fbcd90..1780f79bc1 100644
--- a/hw/i386/pc_q35.c
+++ b/hw/i386/pc_q35.c
@@ -200,7 +200,7 @@ static void pc_q35_init(MachineState *machine)
         smbios_set_defaults("QEMU", "Standard PC (Q35 + ICH9, 2009)",
                             mc->name, pcmc->smbios_legacy_mode,
                             pcmc->smbios_uuid_encoded,
-                            SMBIOS_ENTRY_POINT_TYPE_32);
+                            pcms->smbios_entry_point_type);
     }
 
     /* allocate ram and load rom/bios */
-- 
MST



  parent reply	other threads:[~2022-01-08  1:49 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-08  1:03 [PULL v3 00/55] virtio,pci,pc: features,fixes,cleanups Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 01/55] virtio-mem: Don't skip alignment checks when warning about block size Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 02/55] acpi: validate hotplug selector on access Michael S. Tsirkin
2022-01-08  1:03 ` [Virtio-fs] [PULL v3 03/55] virtio: introduce macro IRTIO_CONFIG_IRQ_IDX Michael S. Tsirkin
2022-01-08  1:03   ` Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 04/55] virtio-pci: decouple notifier from interrupt process Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 05/55] virtio-pci: decouple the single vector from the " Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 06/55] vhost: introduce new VhostOps vhost_set_config_call Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 07/55] vhost-vdpa: add support for config interrupt Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 08/55] virtio: add support for configure interrupt Michael S. Tsirkin
2022-01-08  1:03 ` [PULL v3 09/55] vhost: " Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 10/55] virtio-net: " Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 11/55] virtio-mmio: " Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 12/55] virtio-pci: " Michael S. Tsirkin
2022-01-09  6:17   ` Volker Rümelin
2022-01-09 16:11     ` Michael S. Tsirkin
2022-01-09 17:52       ` Volker Rümelin
2022-01-09 18:01         ` Michael S. Tsirkin
2022-01-09 18:54           ` Volker Rümelin
2022-01-09 20:19             ` Volker Rümelin
2022-01-09 13:33   ` Cédric Le Goater
2022-01-09 15:54     ` Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 13/55] trace-events,pci: unify trace events format Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 14/55] vhost-user-blk: reconnect on any error during realize Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 15/55] chardev/char-socket: tcp_chr_recv: don't clobber errno Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 16/55] chardev/char-socket: tcp_chr_sync_read: " Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 17/55] vhost-backend: avoid overflow on memslots_limit Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 18/55] vhost-backend: stick to -errno error return convention Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 19/55] vhost-vdpa: " Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 20/55] vhost-user: " Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 21/55] vhost: " Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 22/55] vhost-user-blk: propagate error return from generic vhost Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 23/55] pci: Export the pci_intx() function Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 24/55] pcie_aer: Don't trigger a LSI if none are defined Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 25/55] smbios: Rename SMBIOS_ENTRY_POINT_* enums Michael S. Tsirkin
2022-01-08  1:04 ` [PULL v3 26/55] hw/smbios: Use qapi for SmbiosEntryPointType Michael S. Tsirkin
2022-01-08  1:04 ` Michael S. Tsirkin [this message]
2022-01-08  1:05 ` [PULL v3 28/55] hw/vhost-user-blk: turn on VIRTIO_BLK_F_SIZE_MAX feature for virtio blk device Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 29/55] util/oslib-posix: Let touch_all_pages() return an error Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 30/55] util/oslib-posix: Support MADV_POPULATE_WRITE for os_mem_prealloc() Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 31/55] util/oslib-posix: Introduce and use MemsetContext for touch_all_pages() Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 32/55] util/oslib-posix: Don't create too many threads with small memory or little pages Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 33/55] util/oslib-posix: Avoid creating a single thread with MADV_POPULATE_WRITE Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 34/55] util/oslib-posix: Support concurrent os_mem_prealloc() invocation Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 35/55] util/oslib-posix: Forward SIGBUS to MCE handler under Linux Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 36/55] virtio-mem: Support "prealloc=on" option Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 37/55] virtio: signal after wrapping packed used_idx Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 38/55] MAINTAINERS: Add a separate entry for acpi/VIOT tables Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 39/55] linux-headers: sync VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 40/55] virtio-mem: Support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 41/55] virtio-mem: Set "unplugged-inaccessible=auto" for the 7.0 machine on x86 Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 42/55] intel-iommu: correctly check passthrough during translation Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 43/55] acpi: fix QEMU crash when started with SLIC table Michael S. Tsirkin
2022-01-08  1:05 ` [PULL v3 44/55] tests: acpi: whitelist expected blobs before changing them Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 45/55] tests: acpi: add SLIC table test Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 46/55] tests: acpi: SLIC: update expected blobs Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 47/55] acpihp: simplify acpi_pcihp_disable_root_bus Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 48/55] hw/i386/pc: Add missing property descriptions Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 49/55] docs: reSTify virtio-balloon-stats documentation and move to docs/interop Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 50/55] hw/scsi/vhost-scsi: don't leak vqs on error Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 51/55] hw/scsi/vhost-scsi: don't double close vhostfd " Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 52/55] virtio/vhost-vsock: don't double close vhostfd, remove redundant cleanup Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 53/55] tests: acpi: prepare for updated TPM related tables Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 54/55] acpi: tpm: Add missing device identification objects Michael S. Tsirkin
2022-01-08  1:06   ` Michael S. Tsirkin
2022-01-08  1:06 ` [PULL v3 55/55] tests: acpi: Add updated TPM related tables Michael S. Tsirkin
2022-01-08  5:32 ` [PULL v3 00/55] virtio,pci,pc: features,fixes,cleanups Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220108003423.15830-28-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=berrange@redhat.com \
    --cc=eduardo@habkost.net \
    --cc=ehabkost@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.