All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
Subject: Re: [PATCH] PCI: Correct misspelled words
Date: Fri, 7 Jan 2022 20:45:59 -0600	[thread overview]
Message-ID: <20220108024559.GA440111@bhelgaas> (raw)
In-Reply-To: <20220107225942.121484-1-kw@linux.com>

On Fri, Jan 07, 2022 at 10:59:42PM +0000, Krzysztof Wilczyński wrote:
> Fix a number misspelled words, and while at it, correct two phrases used
> to indicate a status of an operation where words used have been cleverly
> truncated and thus always trigger a spellchecking error while performing
> a static code analysis over the PCI tree.
> 
> Signed-off-by: Krzysztof Wilczyński <kw@linux.com>

Applied to pci/misc, thanks!

> ---
>  drivers/pci/controller/cadence/pcie-cadence.h | 2 +-
>  drivers/pci/controller/pcie-mediatek-gen3.c   | 2 +-
>  drivers/pci/endpoint/functions/pci-epf-ntb.c  | 2 +-
>  drivers/pci/of.c                              | 2 +-
>  drivers/pci/quirks.c                          | 4 ++--
>  5 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
> index 262421e5d917..c8a27b6290ce 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence.h
> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
> @@ -310,7 +310,7 @@ struct cdns_pcie {
>   *            single function at a time
>   * @vendor_id: PCI vendor ID
>   * @device_id: PCI device ID
> - * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or
> + * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or
>   *                available
>   * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
>   * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> index 17c59b0d6978..7de82da0bd6d 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -303,7 +303,7 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
>  	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
>  
>  	/*
> -	 * Described in PCIe CEM specification setctions 2.2 (PERST# Signal)
> +	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal)
>  	 * and 2.2.1 (Initial Power-Up (G3 to S0)).
>  	 * The deassertion of PERST# should be delayed 100ms (TPVPERL)
>  	 * for the power and clock to become stable.
> diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> index 5a03401f4571..9a00448c7e61 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-ntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> @@ -1262,7 +1262,7 @@ static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb,
>  }
>  
>  /**
> - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
>   * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>   * @type: PRIMARY interface or SECONDARY interface
>   *
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index 0b1237cff239..cb2e8351c2cc 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -247,7 +247,7 @@ void of_pci_check_probe_only(void)
>  	else
>  		pci_clear_flags(PCI_PROBE_ONLY);
>  
> -	pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
> +	pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled");
>  }
>  EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
>  
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 003950c738d2..e16bde66e735 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -980,8 +980,8 @@ static void quirk_via_ioapic(struct pci_dev *dev)
>  	else
>  		tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
>  
> -	pci_info(dev, "%sbling VIA external APIC routing\n",
> -	       tmp == 0 ? "Disa" : "Ena");
> +	pci_info(dev, "%s VIA external APIC routing\n",
> +	       tmp == 0 ? "Disabling" : "Enabling");
>  
>  	/* Offset 0x58: External APIC IRQ output control */
>  	pci_write_config_byte(dev, 0x58, tmp);
> -- 
> 2.34.1
> 

      reply	other threads:[~2022-01-08  2:46 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-07 22:59 [PATCH] PCI: Correct misspelled words Krzysztof Wilczyński
2022-01-08  2:45 ` Bjorn Helgaas [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220108024559.GA440111@bhelgaas \
    --to=helgaas@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kw@linux.com \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.