From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>,
Arnd Bergmann <arnd@arndb.de>, Shawn Guo <shawnguo@kernel.org>,
Sasha Levin <sashal@kernel.org>,
linux@armlinux.org.uk, linus.walleij@linaro.org,
daniel@thingy.jp, avolmat@me.com, romain.perier@gmail.com,
eugen.hristev@microchip.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 4.9 07/33] ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
Date: Mon, 17 Jan 2022 21:50:49 -0500 [thread overview]
Message-ID: <20220118025116.1954375-7-sashal@kernel.org> (raw)
In-Reply-To: <20220118025116.1954375-1-sashal@kernel.org>
From: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.
This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/Kconfig.debug | 14 +++++++-------
arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index bb8f39fe3a225..8349a171a8f3c 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -341,12 +341,12 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX25.
- config DEBUG_IMX21_IMX27_UART
- bool "i.MX21 and i.MX27 Debug UART"
- depends on SOC_IMX21 || SOC_IMX27
+ config DEBUG_IMX27_UART
+ bool "i.MX27 Debug UART"
+ depends on SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
- on i.MX21 or i.MX27.
+ on i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
@@ -1350,7 +1350,7 @@ config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection"
depends on DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
@@ -1403,12 +1403,12 @@ config DEBUG_LL_INCLUDE
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX53_UART ||\
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index bce58e975ad1f..c750cc9876f6d 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -14,13 +14,6 @@
#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR
#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n)
-#define IMX21_UART1_BASE_ADDR 0x1000a000
-#define IMX21_UART2_BASE_ADDR 0x1000b000
-#define IMX21_UART3_BASE_ADDR 0x1000c000
-#define IMX21_UART4_BASE_ADDR 0x1000d000
-#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n)
-
#define IMX25_UART1_BASE_ADDR 0x43f90000
#define IMX25_UART2_BASE_ADDR 0x43f94000
#define IMX25_UART3_BASE_ADDR 0x5000c000
@@ -29,6 +22,13 @@
#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR
#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n)
+#define IMX27_UART1_BASE_ADDR 0x1000a000
+#define IMX27_UART2_BASE_ADDR 0x1000b000
+#define IMX27_UART3_BASE_ADDR 0x1000c000
+#define IMX27_UART4_BASE_ADDR 0x1000d000
+#define IMX27_UART_BASE_ADDR(n) IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n) IMX27_UART_BASE_ADDR(n)
+
#define IMX31_UART1_BASE_ADDR 0x43f90000
#define IMX31_UART2_BASE_ADDR 0x43f94000
#define IMX31_UART3_BASE_ADDR 0x5000c000
@@ -115,10 +115,10 @@
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21)
#elif defined(CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX27)
#elif defined(CONFIG_DEBUG_IMX31_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31)
#elif defined(CONFIG_DEBUG_IMX35_UART)
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>,
Arnd Bergmann <arnd@arndb.de>, Shawn Guo <shawnguo@kernel.org>,
Sasha Levin <sashal@kernel.org>,
linux@armlinux.org.uk, linus.walleij@linaro.org,
daniel@thingy.jp, avolmat@me.com, romain.perier@gmail.com,
eugen.hristev@microchip.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 4.9 07/33] ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
Date: Mon, 17 Jan 2022 21:50:49 -0500 [thread overview]
Message-ID: <20220118025116.1954375-7-sashal@kernel.org> (raw)
In-Reply-To: <20220118025116.1954375-1-sashal@kernel.org>
From: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[ Upstream commit b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
Since commit 4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.
This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/Kconfig.debug | 14 +++++++-------
arch/arm/include/debug/imx-uart.h | 18 +++++++++---------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index bb8f39fe3a225..8349a171a8f3c 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -341,12 +341,12 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX25.
- config DEBUG_IMX21_IMX27_UART
- bool "i.MX21 and i.MX27 Debug UART"
- depends on SOC_IMX21 || SOC_IMX27
+ config DEBUG_IMX27_UART
+ bool "i.MX27 Debug UART"
+ depends on SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
- on i.MX21 or i.MX27.
+ on i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
@@ -1350,7 +1350,7 @@ config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection"
depends on DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
@@ -1403,12 +1403,12 @@ config DEBUG_LL_INCLUDE
default "debug/icedcc.S" if DEBUG_ICEDCC
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
- DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX50_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX53_UART ||\
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART || \
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index bce58e975ad1f..c750cc9876f6d 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -14,13 +14,6 @@
#define IMX1_UART_BASE_ADDR(n) IMX1_UART##n##_BASE_ADDR
#define IMX1_UART_BASE(n) IMX1_UART_BASE_ADDR(n)
-#define IMX21_UART1_BASE_ADDR 0x1000a000
-#define IMX21_UART2_BASE_ADDR 0x1000b000
-#define IMX21_UART3_BASE_ADDR 0x1000c000
-#define IMX21_UART4_BASE_ADDR 0x1000d000
-#define IMX21_UART_BASE_ADDR(n) IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n) IMX21_UART_BASE_ADDR(n)
-
#define IMX25_UART1_BASE_ADDR 0x43f90000
#define IMX25_UART2_BASE_ADDR 0x43f94000
#define IMX25_UART3_BASE_ADDR 0x5000c000
@@ -29,6 +22,13 @@
#define IMX25_UART_BASE_ADDR(n) IMX25_UART##n##_BASE_ADDR
#define IMX25_UART_BASE(n) IMX25_UART_BASE_ADDR(n)
+#define IMX27_UART1_BASE_ADDR 0x1000a000
+#define IMX27_UART2_BASE_ADDR 0x1000b000
+#define IMX27_UART3_BASE_ADDR 0x1000c000
+#define IMX27_UART4_BASE_ADDR 0x1000d000
+#define IMX27_UART_BASE_ADDR(n) IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n) IMX27_UART_BASE_ADDR(n)
+
#define IMX31_UART1_BASE_ADDR 0x43f90000
#define IMX31_UART2_BASE_ADDR 0x43f94000
#define IMX31_UART3_BASE_ADDR 0x5000c000
@@ -115,10 +115,10 @@
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR IMX_DEBUG_UART_BASE(IMX21)
#elif defined(CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR IMX_DEBUG_UART_BASE(IMX27)
#elif defined(CONFIG_DEBUG_IMX31_UART)
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX31)
#elif defined(CONFIG_DEBUG_IMX35_UART)
--
2.34.1
next prev parent reply other threads:[~2022-01-18 3:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-18 2:50 [PATCH AUTOSEL 4.9 01/33] Bluetooth: Fix debugfs entry leak in hci_register_dev() Sasha Levin
2022-01-18 2:50 ` [Cluster-devel] [PATCH AUTOSEL 4.9 02/33] fs: dlm: filter user dlm messages for kernel locks Sasha Levin
2022-01-18 2:50 ` Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 03/33] ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 04/33] usb: gadget: f_fs: Use stream_open() for endpoint files Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 05/33] HID: apple: Do not reset quirks when the Fn key is not found Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 06/33] media: b2c2: Add missing check in flexcop_pci_isr: Sasha Levin
2022-01-18 2:50 ` Sasha Levin [this message]
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 07/33] ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 08/33] gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 09/33] HSI: core: Fix return freed object in hsi_new_client Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 10/33] mwifiex: Fix skb_over_panic in mwifiex_usb_recv() Sasha Levin
2022-01-18 2:50 ` [PATCH AUTOSEL 4.9 11/33] floppy: Add max size check for user space request Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220118025116.1954375-7-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=arnd@arndb.de \
--cc=avolmat@me.com \
--cc=daniel@thingy.jp \
--cc=eugen.hristev@microchip.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lukas.bulwahn@gmail.com \
--cc=romain.perier@gmail.com \
--cc=shawnguo@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.