From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Cc: sbabic@denx.de, festevam@gmail.com, uboot-imx@nxp.com,
trini@konsulko.com, Adam Ford <aford173@gmail.com>
Subject: [PATCH V2 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1
Date: Sat, 22 Jan 2022 12:27:33 -0600 [thread overview]
Message-ID: <20220122182734.25580-1-aford173@gmail.com> (raw)
Resync the SOM and baseboar files with the device trees that will
be included in 5.17-RC1 when it's cut. This will improve pinmuxing
for USDHC1 and add USB functionality.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
index d6b9dedd16..4097a66163 100644
--- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
@@ -43,6 +43,17 @@
enable-active-high;
};
+ reg_usbotg1: regulator-usbotg1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb_otg1>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
@@ -102,7 +113,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
- clock-names = "xclk";
DCVDD-supply = <®_audio>;
DBVDD-supply = <®_audio>;
AVDD-supply = <®_audio>;
@@ -170,6 +180,24 @@
status = "okay";
};
+&usbotg1 {
+ vbus-supply = <®_usbotg1>;
+ disable-over-current;
+ dr_mode="otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ disable-over-current;
+ dr_mode="host";
+ status = "okay";
+};
+
+&usbphynop2 {
+ reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+};
+
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -216,6 +244,12 @@
>;
};
+ pinctrl_reg_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
diff --git a/arch/arm/dts/imx8mm-beacon-som.dtsi b/arch/arm/dts/imx8mm-beacon-som.dtsi
index d897913537..cf07987ccc 100644
--- a/arch/arm/dts/imx8mm-beacon-som.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-som.dtsi
@@ -91,7 +91,7 @@
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
@@ -256,12 +256,13 @@
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
cap-power-off-card;
- pm-ignore-notify;
keep-power-in-suspend;
mmc-pwrseq = <&usdhc1_pwrseq>;
status = "okay";
--
2.32.0
next reply other threads:[~2022-01-22 18:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-22 18:27 Adam Ford [this message]
2022-01-22 18:27 ` [PATCH V2 2/2] imx: imx8mm_beacon: Enable USB Adam Ford
2022-01-22 20:14 ` Fabio Estevam
2022-01-22 20:17 ` Adam Ford
2022-02-05 16:39 ` sbabic
2022-01-22 20:12 ` [PATCH V2 1/2] arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1 Fabio Estevam
2022-02-05 16:39 ` sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220122182734.25580-1-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=festevam@gmail.com \
--cc=sbabic@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.