From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Subject: [PATCH 11/30] habanalabs: remove asic callback set_pll_profile()
Date: Sat, 22 Jan 2022 21:57:12 +0200 [thread overview]
Message-ID: <20220122195731.934494-11-ogabbay@kernel.org> (raw)
In-Reply-To: <20220122195731.934494-1-ogabbay@kernel.org>
Setting PLL profile is the same for all ASICs, except for GOYA.
However, because this function is never called from common code, there
is no need to have an asic-specific callback function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/common/firmware_if.c | 2 +-
drivers/misc/habanalabs/common/habanalabs.h | 5 +----
drivers/misc/habanalabs/gaudi/gaudi.c | 3 +--
drivers/misc/habanalabs/goya/goya.c | 3 +--
drivers/misc/habanalabs/goya/goya_hwmgr.c | 3 +++
5 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 508ee349f4e4..93e9045461ae 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -2683,7 +2683,7 @@ int hl_fw_init_cpu(struct hl_device *hdev)
hl_fw_static_init_cpu(hdev, fw_loader);
}
-void hl_fw_set_pll_profile(struct hl_device *hdev, enum hl_pll_frequency freq)
+void hl_fw_set_pll_profile(struct hl_device *hdev)
{
hl_fw_set_frequency(hdev, hdev->asic_prop.clk_pll_index,
hdev->asic_prop.max_freq_value);
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 2bf73e5ce47f..3dc155948730 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -1161,7 +1161,6 @@ struct fw_load_mgr {
* internal memory via DMA engine.
* @add_device_attr: add ASIC specific device attributes.
* @handle_eqe: handle event queue entry (IRQ) from CPU-CP.
- * @set_pll_profile: change PLL profile (manual/automatic).
* @get_events_stat: retrieve event queue entries histogram.
* @read_pte: read MMU page table entry from DRAM.
* @write_pte: write MMU page table entry to DRAM.
@@ -1291,8 +1290,6 @@ struct hl_asic_funcs {
struct attribute_group *dev_attr_grp);
void (*handle_eqe)(struct hl_device *hdev,
struct hl_eq_entry *eq_entry);
- void (*set_pll_profile)(struct hl_device *hdev,
- enum hl_pll_frequency freq);
void* (*get_events_stat)(struct hl_device *hdev, bool aggregate,
u32 *size);
u64 (*read_pte)(struct hl_device *hdev, u64 addr);
@@ -3108,7 +3105,7 @@ int hl_set_current(struct hl_device *hdev, int sensor_index, u32 attr, long valu
int hl_set_power(struct hl_device *hdev, int sensor_index, u32 attr, long value);
int hl_get_power(struct hl_device *hdev, int sensor_index, u32 attr, long *value);
int hl_fw_get_clk_rate(struct hl_device *hdev, u32 *cur_clk, u32 *max_clk);
-void hl_fw_set_pll_profile(struct hl_device *hdev, enum hl_pll_frequency freq);
+void hl_fw_set_pll_profile(struct hl_device *hdev);
void hl_sysfs_add_dev_clk_attr(struct hl_device *hdev, struct attribute_group *dev_attr_grp);
void hw_sob_get(struct hl_hw_sob *hw_sob);
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index ae86147dfde4..bb0b4ff3451d 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -1635,7 +1635,7 @@ static int gaudi_late_init(struct hl_device *hdev)
*/
gaudi_mmu_prepare(hdev, 1);
- hdev->asic_funcs->set_pll_profile(hdev, PLL_LAST);
+ hl_fw_set_pll_profile(hdev);
return 0;
@@ -9363,7 +9363,6 @@ static const struct hl_asic_funcs gaudi_funcs = {
.debugfs_read_dma = gaudi_debugfs_read_dma,
.add_device_attr = hl_sysfs_add_dev_clk_attr,
.handle_eqe = gaudi_handle_eqe,
- .set_pll_profile = hl_fw_set_pll_profile,
.get_events_stat = gaudi_get_events_stat,
.read_pte = gaudi_read_pte,
.write_pte = gaudi_write_pte,
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 318b97c53ed7..916a718dddac 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -893,7 +893,7 @@ int goya_late_init(struct hl_device *hdev)
goya->pm_mng_profile = PM_AUTO;
- hdev->asic_funcs->set_pll_profile(hdev, PLL_LOW);
+ goya_set_pll_profile(hdev, PLL_LOW);
schedule_delayed_work(&goya->goya_work->work_freq,
usecs_to_jiffies(HL_PLL_LOW_JOB_FREQ_USEC));
@@ -5717,7 +5717,6 @@ static const struct hl_asic_funcs goya_funcs = {
.debugfs_read_dma = goya_debugfs_read_dma,
.add_device_attr = goya_add_device_attr,
.handle_eqe = goya_handle_eqe,
- .set_pll_profile = goya_set_pll_profile,
.get_events_stat = goya_get_events_stat,
.read_pte = goya_read_pte,
.write_pte = goya_write_pte,
diff --git a/drivers/misc/habanalabs/goya/goya_hwmgr.c b/drivers/misc/habanalabs/goya/goya_hwmgr.c
index f9f3afe94056..7d4f26c67d8e 100644
--- a/drivers/misc/habanalabs/goya/goya_hwmgr.c
+++ b/drivers/misc/habanalabs/goya/goya_hwmgr.c
@@ -11,6 +11,9 @@ void goya_set_pll_profile(struct hl_device *hdev, enum hl_pll_frequency freq)
{
struct goya_device *goya = hdev->asic_specific;
+ if (!hdev->pdev)
+ return;
+
switch (freq) {
case PLL_HIGH:
hl_fw_set_frequency(hdev, HL_GOYA_MME_PLL, hdev->high_pll);
--
2.25.1
next prev parent reply other threads:[~2022-01-22 19:58 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-22 19:57 [PATCH 01/30] habanalabs: check the return value of hl_cs_poll_fences() Oded Gabbay
2022-01-22 19:57 ` [PATCH 02/30] habanalabs: fix race when waiting on encaps signal Oded Gabbay
2022-01-22 19:57 ` [PATCH 03/30] habanalabs: fix possible memory leak in MMU DR fini Oded Gabbay
2022-01-22 19:57 ` [PATCH 04/30] habanalabs/gaudi: disable CGM permanently Oded Gabbay
2022-01-22 19:57 ` [PATCH 05/30] habanalabs: remove ASIC functions of clock gating Oded Gabbay
2022-01-22 19:57 ` [PATCH 06/30] habanalabs: make some MMU functions common Oded Gabbay
2022-01-22 19:57 ` [PATCH 07/30] habanalabs: sysfs functions should be in sysfs.c Oded Gabbay
2022-01-22 19:57 ` [PATCH 08/30] habanalabs: get clk is common function Oded Gabbay
2022-01-22 19:57 ` [PATCH 09/30] habanalabs: remove hwmgr.c Oded Gabbay
2022-01-22 19:57 ` [PATCH 10/30] habanalabs: move more f/w functions to firmware_if.c Oded Gabbay
2022-01-22 19:57 ` Oded Gabbay [this message]
2022-01-22 19:57 ` [PATCH 12/30] habanalabs: rename dev_attr_grp to dev_clk_attr_grp Oded Gabbay
2022-01-22 19:57 ` [PATCH 13/30] habanalabs: add vrm version to sysfs Oded Gabbay
2022-01-22 19:57 ` [PATCH 14/30] habanalabs: remove power9 workaround for dma support Oded Gabbay
2022-01-22 19:57 ` [PATCH 15/30] habanalabs: use common wrapper for MMU cache invalidation Oded Gabbay
2022-01-22 19:57 ` [PATCH 16/30] habanalabs: sysfs support for fw os version Oded Gabbay
2022-01-22 19:57 ` [PATCH 17/30] habanalabs: there is no kernel TDR in future ASICs Oded Gabbay
2022-01-22 19:57 ` [PATCH 18/30] habanalabs: duplicate HOP table props to MMU props Oded Gabbay
2022-01-22 19:57 ` [PATCH 19/30] habanalabs: don't free phys_pg_pack inside lock Oded Gabbay
2022-01-22 19:57 ` [PATCH 20/30] habanalabs: avoid copying pll data if pll_info_get fails Oded Gabbay
2022-01-22 19:57 ` [PATCH 21/30] habanalabs: add missing error check in sysfs clk_freq_mhz_show Oded Gabbay
2022-01-22 19:57 ` [PATCH 22/30] habanalabs: fix soft reset flow in case of failure Oded Gabbay
2022-01-22 19:57 ` [PATCH 23/30] habanalabs: add missing error check in sysfs max_power_show Oded Gabbay
2022-01-22 19:57 ` [PATCH 24/30] habanalabs: update to latest f/w specs Oded Gabbay
2022-01-22 19:57 ` [PATCH 25/30] habanalabs: expose number of user interrupts Oded Gabbay
2022-01-22 19:57 ` [PATCH 26/30] habanalabs: reject host map with mmu disabled Oded Gabbay
2022-01-22 19:57 ` [PATCH 27/30] habanalabs: fix user interrupt wait when timeout is 0 Oded Gabbay
2022-01-22 19:57 ` [PATCH 28/30] habanalabs: fix race between wait and irq Oded Gabbay
2022-01-22 19:57 ` [PATCH 29/30] habanalabs: prevent false heartbeat failure during soft-reset Oded Gabbay
2022-01-22 19:57 ` [PATCH 30/30] habanalabs: remove duplicate print Oded Gabbay
[not found] ` <20220123002722.3057-1-hdanton@sina.com>
2022-01-24 18:22 ` [PATCH 02/30] habanalabs: fix race when waiting on encaps signal Dani Liberman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220122195731.934494-11-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.