All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [RFC PATCH v7 11/16] net: dsa: qca8k: add support for mib autocast in Ethernet packet
Date: Sun, 23 Jan 2022 02:33:32 +0100	[thread overview]
Message-ID: <20220123013337.20945-12-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220123013337.20945-1-ansuelsmth@gmail.com>

The switch can autocast MIB counter using Ethernet packet.
Add support for this and provide a handler for the tagger.
The switch will send packet with MIB counter for each port, the switch
will use completion API to wait for the correct packet to be received
and will complete the task only when each packet is received.
Although the handler will drop all the other packet, we still have to
consume each MIB packet to complete the request. This is done to prevent
mixed data with concurrent ethtool request.

connect_tag_protocol() is used to add the handler to the tag_qca tagger,
master_state_change() use the MIB lock to make sure no MIB Ethernet is
in progress.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 108 +++++++++++++++++++++++++++++++++++++++-
 drivers/net/dsa/qca8k.h |  17 ++++++-
 2 files changed, 122 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 35711d010eb4..f51a6d8993ff 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -811,7 +811,10 @@ qca8k_mib_init(struct qca8k_priv *priv)
 	int ret;
 
 	mutex_lock(&priv->reg_mutex);
-	ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
+	ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB,
+				 QCA8K_MIB_FUNC | QCA8K_MIB_BUSY,
+				 FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_FLUSH) |
+				 QCA8K_MIB_BUSY);
 	if (ret)
 		goto exit;
 
@@ -1882,6 +1885,97 @@ qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
 			ETH_GSTRING_LEN);
 }
 
+static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb)
+{
+	const struct qca8k_match_data *match_data;
+	struct qca8k_mib_hdr_data *mib_hdr_data;
+	struct qca8k_priv *priv = ds->priv;
+	const struct qca8k_mib_desc *mib;
+	struct mib_ethhdr *mib_ethhdr;
+	int i, mib_len, offset = 0;
+	u64 *data;
+	u8 port;
+
+	mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb);
+	mib_hdr_data = &priv->mib_hdr_data;
+
+	/* The switch autocast every port. Ignore other packet and
+	 * parse only the requested one.
+	 */
+	port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr));
+	if (port != mib_hdr_data->req_port)
+		goto exit;
+
+	match_data = device_get_match_data(priv->dev);
+	data = mib_hdr_data->data;
+
+	for (i = 0; i < match_data->mib_count; i++) {
+		mib = &ar8327_mib[i];
+
+		/* First 3 mib are present in the skb head */
+		if (i < 3) {
+			data[i] = mib_ethhdr->data[i];
+			continue;
+		}
+
+		mib_len = sizeof(uint32_t);
+
+		/* Some mib are 64 bit wide */
+		if (mib->size == 2)
+			mib_len = sizeof(uint64_t);
+
+		/* Copy the mib value from packet to the */
+		memcpy(data + i, skb->data + offset, mib_len);
+
+		/* Set the offset for the next mib */
+		offset += mib_len;
+	}
+
+exit:
+	/* Complete on receiving all the mib packet */
+	if (refcount_dec_and_test(&mib_hdr_data->port_parsed))
+		complete(&mib_hdr_data->rw_done);
+}
+
+static int
+qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data)
+{
+	struct dsa_port *dp = dsa_to_port(ds, port);
+	struct qca8k_mib_hdr_data *mib_hdr_data;
+	struct qca8k_priv *priv = ds->priv;
+	int ret;
+
+	mib_hdr_data = &priv->mib_hdr_data;
+
+	mutex_lock(&mib_hdr_data->mutex);
+
+	reinit_completion(&mib_hdr_data->rw_done);
+
+	mib_hdr_data->req_port = dp->index;
+	mib_hdr_data->data = data;
+	refcount_set(&mib_hdr_data->port_parsed, QCA8K_NUM_PORTS);
+
+	mutex_lock(&priv->reg_mutex);
+
+	/* Send mib autocast request */
+	ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB,
+				 QCA8K_MIB_FUNC | QCA8K_MIB_BUSY,
+				 FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) |
+				 QCA8K_MIB_BUSY);
+
+	mutex_unlock(&priv->reg_mutex);
+
+	if (ret)
+		goto exit;
+
+	ret = wait_for_completion_timeout(&mib_hdr_data->rw_done, QCA8K_ETHERNET_TIMEOUT);
+
+exit:
+	mutex_unlock(&mib_hdr_data->mutex);
+
+	return ret;
+}
+
 static void
 qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
 			uint64_t *data)
@@ -1893,6 +1987,10 @@ qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
 	u32 hi = 0;
 	int ret;
 
+	if (priv->mgmt_master &&
+	    qca8k_get_ethtool_stats_eth(ds, port, data) > 0)
+		return;
+
 	match_data = of_device_get_match_data(priv->dev);
 
 	for (i = 0; i < match_data->mib_count; i++) {
@@ -2573,7 +2671,8 @@ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
 	if (dp->index != 0)
 		return;
 
-	mutex_lock(&priv->mgmt_hdr_data.mutex);
+	mutex_unlock(&priv->mgmt_hdr_data.mutex);
+	mutex_lock(&priv->mib_hdr_data.mutex);
 
 	if (operational)
 		priv->mgmt_master = master;
@@ -2581,6 +2680,7 @@ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
 		priv->mgmt_master = NULL;
 
 	mutex_unlock(&priv->mgmt_hdr_data.mutex);
+	mutex_unlock(&priv->mib_hdr_data.mutex);
 }
 
 static int qca8k_connect_tag_protocol(struct dsa_switch *ds,
@@ -2593,6 +2693,7 @@ static int qca8k_connect_tag_protocol(struct dsa_switch *ds,
 		tagger_data = ds->tagger_data;
 
 		tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler;
+		tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler;
 
 		break;
 	default:
@@ -2721,6 +2822,9 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 	mutex_init(&priv->mgmt_hdr_data.mutex);
 	init_completion(&priv->mgmt_hdr_data.rw_done);
 
+	mutex_init(&priv->mib_hdr_data.mutex);
+	init_completion(&priv->mib_hdr_data.rw_done);
+
 	priv->ds->dev = &mdiodev->dev;
 	priv->ds->num_ports = QCA8K_NUM_PORTS;
 	priv->ds->priv = priv;
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index a358a67044d3..dc1365542aa3 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -67,7 +67,7 @@
 #define QCA8K_REG_MODULE_EN				0x030
 #define   QCA8K_MODULE_EN_MIB				BIT(0)
 #define QCA8K_REG_MIB					0x034
-#define   QCA8K_MIB_FLUSH				BIT(24)
+#define   QCA8K_MIB_FUNC				GENMASK(26, 24)
 #define   QCA8K_MIB_CPU_KEEP				BIT(20)
 #define   QCA8K_MIB_BUSY				BIT(17)
 #define QCA8K_MDIO_MASTER_CTRL				0x3c
@@ -317,6 +317,12 @@ enum qca8k_vlan_cmd {
 	QCA8K_VLAN_READ = 6,
 };
 
+enum qca8k_mid_cmd {
+	QCA8K_MIB_FLUSH = 1,
+	QCA8K_MIB_FLUSH_PORT = 2,
+	QCA8K_MIB_CAST = 3,
+};
+
 struct ar8xxx_port_status {
 	int enabled;
 };
@@ -340,6 +346,14 @@ struct qca8k_mgmt_hdr_data {
 	u32 data[4];
 };
 
+struct qca8k_mib_hdr_data {
+	struct completion rw_done;
+	struct mutex mutex; /* Process one command at time */
+	refcount_t port_parsed; /* Counter to track parsed port */
+	u8 req_port;
+	u64 *data; /* pointer to ethtool data */
+};
+
 struct qca8k_ports_config {
 	bool sgmii_rx_clk_falling_edge;
 	bool sgmii_tx_clk_falling_edge;
@@ -367,6 +381,7 @@ struct qca8k_priv {
 	unsigned int port_mtu[QCA8K_NUM_PORTS];
 	const struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */
 	struct qca8k_mgmt_hdr_data mgmt_hdr_data;
+	struct qca8k_mib_hdr_data mib_hdr_data;
 };
 
 struct qca8k_mib_desc {
-- 
2.33.1


  parent reply	other threads:[~2022-01-23  1:34 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-23  1:33 [RFC PATCH v7 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2022-01-23  1:33 ` [RFC PATCH v7 01/16] net: dsa: provide switch operations for tracking the master state Ansuel Smith
2022-01-26  3:22   ` Florian Fainelli
2022-01-26 21:00     ` Vladimir Oltean
2022-01-23  1:33 ` [RFC PATCH v7 02/16] net: dsa: replay master state events in dsa_tree_{setup,teardown}_master Ansuel Smith
2022-01-26  3:27   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 03/16] net: dsa: tag_qca: convert to FIELD macro Ansuel Smith
2022-01-24 16:00   ` Vladimir Oltean
2022-01-26  3:28   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 04/16] net: dsa: tag_qca: move define to include linux/dsa Ansuel Smith
2022-01-24 15:59   ` Vladimir Oltean
2022-01-26  3:28   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 05/16] net: dsa: tag_qca: enable promisc_on_master flag Ansuel Smith
2022-01-26  3:28   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 06/16] net: dsa: tag_qca: add define for handling mgmt Ethernet packet Ansuel Smith
2022-01-24 16:05   ` Vladimir Oltean
2022-01-24 16:16     ` Ansuel Smith
2022-01-26  3:54   ` Florian Fainelli
2022-01-26  4:01     ` Ansuel Smith
2022-01-26  4:02       ` Florian Fainelli
2022-01-26  4:05         ` Ansuel Smith
2022-01-26  3:57   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 07/16] net: dsa: tag_qca: add define for handling MIB packet Ansuel Smith
2022-01-23  1:33 ` [RFC PATCH v7 08/16] net: dsa: tag_qca: add support for handling mgmt and MIB Ethernet packet Ansuel Smith
2022-01-24 16:08   ` Vladimir Oltean
2022-01-26  3:34   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 09/16] net: dsa: qca8k: add tracking state of master port Ansuel Smith
2022-01-26  3:37   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 10/16] net: dsa: qca8k: add support for mgmt read/write in Ethernet packet Ansuel Smith
2022-01-24 16:32   ` Vladimir Oltean
2022-01-24 16:48     ` Ansuel Smith
2022-01-25 14:54       ` Vladimir Oltean
2022-01-23  1:33 ` Ansuel Smith [this message]
2022-01-25 15:12   ` [RFC PATCH v7 11/16] net: dsa: qca8k: add support for mib autocast " Vladimir Oltean
2022-01-23  1:33 ` [RFC PATCH v7 12/16] net: dsa: qca8k: add support for phy read/write with mgmt Ethernet Ansuel Smith
2022-01-25 15:03   ` Vladimir Oltean
2022-01-25 23:14     ` Ansuel Smith
2022-01-26  1:48       ` Vladimir Oltean
2022-01-26  1:57         ` Ansuel Smith
2022-01-26 22:05           ` Vladimir Oltean
2022-01-23  1:33 ` [RFC PATCH v7 13/16] net: dsa: qca8k: move page cache to driver priv Ansuel Smith
2022-01-26  3:50   ` Florian Fainelli
2022-02-01 21:39     ` Ansuel Smith
2022-01-23  1:33 ` [RFC PATCH v7 14/16] net: dsa: qca8k: cache lo and hi for mdio write Ansuel Smith
2022-01-26  3:42   ` Florian Fainelli
2022-01-23  1:33 ` [RFC PATCH v7 15/16] net: da: qca8k: add support for larger read/write size with mgmt Ethernet Ansuel Smith
2022-01-26  3:48   ` Florian Fainelli
2022-01-26  3:57     ` Ansuel Smith
2022-01-23  1:33 ` [RFC PATCH v7 16/16] net: dsa: qca8k: introduce qca8k_bulk_read/write function Ansuel Smith
2022-01-26  3:45   ` Florian Fainelli
2022-01-26  3:53     ` Ansuel Smith
2022-01-30 13:59 ` [RFC PATCH v7 00/16] Add support for qca8k mdio rw in Ethernet packet Ansuel Smith
2022-01-30 17:07   ` Florian Fainelli
2022-02-03 17:59     ` Ansuel Smith
2022-02-03 18:21       ` Vladimir Oltean
2022-02-03 20:10         ` Jakub Kicinski
2022-02-03 20:31           ` Ansuel Smith
2022-02-03 21:25           ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220123013337.20945-12-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.