[PATCH 5.10 3/6] bnx2x: Invalidate fastpath HSI version for VFs

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Manish Chopra <manishc@marvell.com>

commit 802d4d207e75d7208ff75adb712b556c1e91cf1c upstream

Commit 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.")
added validation for fastpath HSI versions for different
client init which was not meant for SR-IOV VF clients, which
resulted in firmware asserts when running VF clients with
different fastpath HSI version.

This patch along with the new firmware support in patch #1
fixes this behavior in order to not validate fastpath HSI
version for the VFs.

Fixes: 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -758,9 +758,18 @@ static void bnx2x_vf_igu_reset(struct bn
 
 void bnx2x_vf_enable_access(struct bnx2x *bp, u8 abs_vfid)
 {
+	u16 abs_fid;
+
+	abs_fid = FW_VF_HANDLE(abs_vfid);
+
 	/* set the VF-PF association in the FW */
-	storm_memset_vf_to_pf(bp, FW_VF_HANDLE(abs_vfid), BP_FUNC(bp));
-	storm_memset_func_en(bp, FW_VF_HANDLE(abs_vfid), 1);
+	storm_memset_vf_to_pf(bp, abs_fid, BP_FUNC(bp));
+	storm_memset_func_en(bp, abs_fid, 1);
+
+	/* Invalidate fp_hsi version for vfs */
+	if (bp->fw_cap & FW_CAP_INVALIDATE_VF_FP_HSI)
+		REG_WR8(bp, BAR_XSTRORM_INTMEM +
+			    XSTORM_ETH_FUNCTION_INFO_FP_HSI_VALID_E2_OFFSET(abs_fid), 0);
 
 	/* clear vf errors*/
 	bnx2x_vf_semi_clear_err(bp, abs_vfid);