From: Bart Van Assche <bvanassche@acm.org>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org, Bart Van Assche <bvanassche@acm.org>,
"James E.J. Bottomley" <jejb@linux.ibm.com>
Subject: [PATCH 02/44] nsp_cs: Use true and false instead of TRUE and FALSE
Date: Fri, 28 Jan 2022 14:18:27 -0800 [thread overview]
Message-ID: <20220128221909.8141-3-bvanassche@acm.org> (raw)
In-Reply-To: <20220128221909.8141-1-bvanassche@acm.org>
Additionally, change the return type of the functions that always return
TRUE from 'int' into 'void'. This patch prepares for removal of the
drivers/scsi/scsi.h header file. That header file defines the 'TRUE' and
'FALSE' constants.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
drivers/scsi/pcmcia/nsp_cs.c | 43 +++++++++++++++---------------------
drivers/scsi/pcmcia/nsp_cs.h | 6 ++---
2 files changed, 21 insertions(+), 28 deletions(-)
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 92c818a8a84a..a78a86511e94 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -243,7 +243,7 @@ static int nsp_queuecommand_lck(struct scsi_cmnd *SCpnt)
SCpnt->SCp.buffers_residual = 0;
}
- if (nsphw_start_selection(SCpnt) == FALSE) {
+ if (!nsphw_start_selection(SCpnt)) {
nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "selection fail");
SCpnt->result = DID_BUS_BUSY << 16;
nsp_scsi_done(SCpnt);
@@ -263,14 +263,14 @@ static DEF_SCSI_QCMD(nsp_queuecommand)
/*
* setup PIO FIFO transfer mode and enable/disable to data out
*/
-static void nsp_setup_fifo(nsp_hw_data *data, int enabled)
+static void nsp_setup_fifo(nsp_hw_data *data, bool enabled)
{
unsigned int base = data->BaseAddress;
unsigned char transfer_mode_reg;
//nsp_dbg(NSP_DEBUG_DATA_IO, "enabled=%d", enabled);
- if (enabled != FALSE) {
+ if (enabled) {
transfer_mode_reg = TRANSFER_GO | BRAIND;
} else {
transfer_mode_reg = 0;
@@ -298,7 +298,7 @@ static void nsphw_init_sync(nsp_hw_data *data)
/*
* Initialize Ninja hardware
*/
-static int nsphw_init(nsp_hw_data *data)
+static void nsphw_init(nsp_hw_data *data)
{
unsigned int base = data->BaseAddress;
@@ -348,15 +348,13 @@ static int nsphw_init(nsp_hw_data *data)
SCSI_RESET_IRQ_EI );
nsp_write(base, IRQCONTROL, IRQCONTROL_ALLCLEAR);
- nsp_setup_fifo(data, FALSE);
-
- return TRUE;
+ nsp_setup_fifo(data, false);
}
/*
* Start selection phase
*/
-static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
+static bool nsphw_start_selection(struct scsi_cmnd *SCpnt)
{
unsigned int host_id = SCpnt->device->host->this_id;
unsigned int base = SCpnt->device->host->io_port;
@@ -370,7 +368,7 @@ static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
phase = nsp_index_read(base, SCSIBUSMON);
if(phase != BUSMON_BUS_FREE) {
//nsp_dbg(NSP_DEBUG_RESELECTION, "bus busy");
- return FALSE;
+ return false;
}
/* start arbitration */
@@ -390,7 +388,7 @@ static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
if (!(arbit & ARBIT_WIN)) {
//nsp_dbg(NSP_DEBUG_RESELECTION, "arbit fail");
nsp_index_write(base, SETARBIT, ARBIT_FLAG_CLEAR);
- return FALSE;
+ return false;
}
/* assert select line */
@@ -409,7 +407,7 @@ static int nsphw_start_selection(struct scsi_cmnd *SCpnt)
nsp_start_timer(SCpnt, 1000/51);
data->SelectionTimeOut = 1;
- return TRUE;
+ return true;
}
struct nsp_sync_table {
@@ -479,7 +477,7 @@ static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt)
sync->SyncRegister = 0;
sync->AckWidth = 0;
- return FALSE;
+ return false;
}
sync->SyncRegister = (sync_table->chip_period << SYNCREG_PERIOD_SHIFT) |
@@ -488,7 +486,7 @@ static int nsp_analyze_sdtr(struct scsi_cmnd *SCpnt)
nsp_dbg(NSP_DEBUG_SYNC, "sync_reg=0x%x, ack_width=0x%x", sync->SyncRegister, sync->AckWidth);
- return TRUE;
+ return true;
}
@@ -635,7 +633,7 @@ static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt)
nsp_dbg(NSP_DEBUG_DATA_IO, "use bypass quirk");
SCpnt->SCp.phase = PH_DATA;
nsp_pio_read(SCpnt);
- nsp_setup_fifo(data, FALSE);
+ nsp_setup_fifo(data, false);
return 0;
}
@@ -643,7 +641,7 @@ static int nsp_dataphase_bypass(struct scsi_cmnd *SCpnt)
/*
* accept reselection
*/
-static int nsp_reselected(struct scsi_cmnd *SCpnt)
+static void nsp_reselected(struct scsi_cmnd *SCpnt)
{
unsigned int base = SCpnt->device->host->io_port;
unsigned int host_id = SCpnt->device->host->this_id;
@@ -675,8 +673,6 @@ static int nsp_reselected(struct scsi_cmnd *SCpnt)
bus_reg = nsp_index_read(base, SCSIBUSCTRL) & ~(SCSI_BSY | SCSI_ATN);
nsp_index_write(base, SCSIBUSCTRL, bus_reg);
nsp_index_write(base, SCSIBUSCTRL, bus_reg | AUTODIRECTION | ACKENB);
-
- return TRUE;
}
/*
@@ -931,7 +927,7 @@ static int nsp_nexus(struct scsi_cmnd *SCpnt)
}
/* setup pdma fifo */
- nsp_setup_fifo(data, TRUE);
+ nsp_setup_fifo(data, true);
/* clear ack counter */
data->FifoCount = 0;
@@ -1057,9 +1053,8 @@ static irqreturn_t nspintr(int irq, void *dev_id)
if (irq_phase & RESELECT_IRQ) {
nsp_dbg(NSP_DEBUG_INTR, "reselect");
nsp_write(base, IRQCONTROL, IRQCONTROL_RESELECT_CLEAR);
- if (nsp_reselected(tmpSC) != FALSE) {
- return IRQ_HANDLED;
- }
+ nsp_reselected(tmpSC);
+ return IRQ_HANDLED;
}
if ((irq_phase & (PHASE_CHANGE_IRQ | LATCHED_BUS_FREE)) == 0) {
@@ -1215,7 +1210,7 @@ static irqreturn_t nspintr(int irq, void *dev_id)
//*sync_neg = SYNC_NOT_YET;
data->MsgLen = i = 0;
- data->MsgBuffer[i] = IDENTIFY(TRUE, lun); i++;
+ data->MsgBuffer[i] = IDENTIFY(true, lun); i++;
if (*sync_neg == SYNC_NOT_YET) {
data->Sync[target].SyncPeriod = 0;
@@ -1614,9 +1609,7 @@ static int nsp_cs_config(struct pcmcia_device *link)
nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
data->BaseAddress, data->NumAddress, data->IrqNumber);
- if(nsphw_init(data) == FALSE) {
- goto cs_failed;
- }
+ nsphw_init(data);
host = nsp_detect(&nsp_driver_template);
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index 665bf8d0faf7..7d5d1a5b36e0 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -304,8 +304,8 @@ static int nsp_eh_host_reset (struct scsi_cmnd *SCpnt);
static int nsp_bus_reset (nsp_hw_data *data);
/* */
-static int nsphw_init (nsp_hw_data *data);
-static int nsphw_start_selection(struct scsi_cmnd *SCpnt);
+static void nsphw_init (nsp_hw_data *data);
+static bool nsphw_start_selection(struct scsi_cmnd *SCpnt);
static void nsp_start_timer (struct scsi_cmnd *SCpnt, int time);
static int nsp_fifo_count (struct scsi_cmnd *SCpnt);
static void nsp_pio_read (struct scsi_cmnd *SCpnt);
@@ -320,7 +320,7 @@ static int nsp_expect_signal (struct scsi_cmnd *SCpnt,
unsigned char mask);
static int nsp_xfer (struct scsi_cmnd *SCpnt, int phase);
static int nsp_dataphase_bypass (struct scsi_cmnd *SCpnt);
-static int nsp_reselected (struct scsi_cmnd *SCpnt);
+static void nsp_reselected (struct scsi_cmnd *SCpnt);
static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht);
/* Interrupt handler */
next prev parent reply other threads:[~2022-01-28 22:20 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-28 22:18 [PATCH 00/44] Remove the SCSI pointer from struct scsi_cmnd Bart Van Assche
2022-01-28 22:18 ` [PATCH 01/44] ips: Use true and false instead of TRUE and FALSE Bart Van Assche
2022-01-31 9:53 ` Johannes Thumshirn
2022-01-28 22:18 ` Bart Van Assche [this message]
2022-01-31 9:55 ` [PATCH 02/44] nsp_cs: " Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 03/44] scsi: Remove drivers/scsi/scsi.h Bart Van Assche
2022-01-31 12:53 ` Greg Kroah-Hartman
2022-01-28 22:18 ` [PATCH 04/44] NCR5380: Remove the NCR5380_CMD_SIZE macro Bart Van Assche
2022-01-31 9:58 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 05/44] NCR5380: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 10:04 ` Johannes Thumshirn
2022-01-31 22:39 ` Finn Thain
2022-01-31 23:36 ` Bart Van Assche
2022-02-01 0:11 ` Finn Thain
2022-01-28 22:18 ` [PATCH 06/44] scsi: arm: Rename arm/scsi.h into arm/arm_scsi.h Bart Van Assche
2022-01-31 10:09 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 07/44] scsi: arm: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 08/44] 53c700: Stop clearing SCSI pointer fields Bart Van Assche
2022-01-31 10:15 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 09/44] aacraid: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 10/44] advansys: " Bart Van Assche
2022-01-31 10:23 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 11/44] aha1542: Remove a set-but-not-used array Bart Van Assche
2022-01-31 10:25 ` Johannes Thumshirn
2022-01-31 17:13 ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 12/44] aha152x: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 10:32 ` Johannes Thumshirn
2022-01-31 17:16 ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 13/44] bfa: Stop using the SCSI pointer Bart Van Assche
2022-01-31 10:39 ` Johannes Thumshirn
2022-01-31 17:19 ` Bart Van Assche
2022-02-01 9:16 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 14/44] csio: " Bart Van Assche
2022-01-31 10:41 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 15/44] dc395x: " Bart Van Assche
2022-01-31 10:42 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 16/44] esp_scsi: " Bart Van Assche
2022-01-31 10:43 ` Johannes Thumshirn
2022-01-31 22:46 ` Finn Thain
2022-02-01 21:20 ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 17/44] fdomain: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 10:44 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 18/44] fnic: Fix a tracing statement Bart Van Assche
2022-01-28 22:18 ` [PATCH 19/44] fnic: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:01 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 20/44] hptiop: " Bart Van Assche
2022-01-31 11:03 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 21/44] imm: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:17 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 22/44] iscsi: Stop using the SCSI pointer Bart Van Assche
2022-01-28 22:18 ` [PATCH 23/44] initio: " Bart Van Assche
2022-01-31 11:19 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 24/44] libfc: " Bart Van Assche
2022-01-28 22:18 ` [PATCH 25/44] mac53c94: Fix a set-but-not-used compiler warning Bart Van Assche
2022-01-31 11:21 ` Johannes Thumshirn
2022-01-31 17:22 ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 26/44] mac53c94: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:22 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 27/44] megaraid: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:27 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 28/44] megasas: " Bart Van Assche
2022-01-31 11:28 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 29/44] mesh: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:31 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 30/44] mvsas: Fix a set-but-not-used warning Bart Van Assche
2022-01-31 11:33 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 31/44] mvumi: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:34 ` Johannes Thumshirn
2022-01-28 22:18 ` [PATCH 32/44] nsp32: " Bart Van Assche
2022-01-31 2:53 ` Masanori Goto
2022-01-31 17:28 ` Bart Van Assche
2022-01-28 22:18 ` [PATCH 33/44] nsp_cs: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:18 ` [PATCH 34/44] sym53c500_cs: " Bart Van Assche
2022-01-31 11:37 ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 35/44] ppa: " Bart Van Assche
2022-01-31 11:38 ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 36/44] qla1280: " Bart Van Assche
2022-01-31 11:39 ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 37/44] qla2xxx: Stop using the SCSI pointer Bart Van Assche
2022-01-28 22:19 ` [PATCH 38/44] smartpqi: " Bart Van Assche
2022-01-31 11:41 ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 39/44] sym53c8xx_2: Move the SCSI pointer to private command data Bart Van Assche
2022-01-31 11:42 ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 40/44] scsi: usb: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:43 ` Johannes Thumshirn
2022-01-31 12:53 ` Greg Kroah-Hartman
2022-02-02 8:14 ` Oliver Neukum
2022-01-28 22:19 ` [PATCH 41/44] wd719x: " Bart Van Assche
2022-01-31 11:44 ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 42/44] wdc33c93: Move the SCSI pointer to private command data Bart Van Assche
2022-01-28 22:19 ` [PATCH 43/44] zalon: Stop using the SCSI pointer Bart Van Assche
2022-01-31 11:46 ` Johannes Thumshirn
2022-01-28 22:19 ` [PATCH 44/44] scsi: core: Remove struct scsi_pointer from struct scsi_cmnd Bart Van Assche
2022-01-31 11:47 ` Johannes Thumshirn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220128221909.8141-3-bvanassche@acm.org \
--to=bvanassche@acm.org \
--cc=jejb@linux.ibm.com \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.